"Feuer Frei!" scatter blaster

Design by fakebusker83

(3)

4.67 out of 5
*
*
*
*
*

(4) Comments

Contact Designer

Version 1.5
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.

A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.

A larger version can be found here.

This model is tested in WSF.

cm: 1.968 w x 9.64 d x 1.506 h

in: 0.775 w x 3.795 d x 0.593 h

Comments

You must login to leave a comment

caked-up says:

Flag as inappropriate

Okay. When I make another shapeways order I will get it.

July 13, 2012, 8:28 pm

fakebusker83 says:

Flag as inappropriate

Hi guys, @Namseidal712 An easy fix for the looseness will be to use super glue to thicken the required parts. I could make those parts thicker, but since I'm designing the model to work with different materials, the fixes will cause other materials to *not* work. When designing for Shapeways I have to err on the side of looseness, as that is easier to remedy. Besides, WSF material shrinks sometimes depending on the settings of the machine used to produce the model, so much of it boils down to luck as well. @caked-up Unfortunately WSFP was in the list of available materials, but for some reason Shapeways removed it. I suspect this is because some of the detail is too delicate to survive the polishing process. Anyway, WSFP will not give you much better detail than standard WSF on finer models such as these, as the polishing process works better for large, clean surfaces. Ariel

July 12, 2012, 6:07 am

caked-up says:

Flag as inappropriate

Any chance of getting this in the WSF Polished variety. The pitting is just absolutely terrible and the detail stuff is too expensive. I have another set of of Targetmasters I bought int he WSF and still have not painted them a year later.

July 12, 2012, 5:53 am

Namseidal712 says:

Flag as inappropriate

Great design! I ordered your first version though, and the flaws which bothered me, where that Megatron didn't hold it in his hand very good, and even worse, the gun held terribly on his back and would fall out very easily. I felt as if the 2 auxiliary pegs needed to be a tiny bit ticker so as to stay on his back better and/or even rounding those pegs to the exact size of the hole in Megatron's back. If it would be possible to do this, I would probably order another one for the fixes.

April 26, 2012, 3:38 am