Skyrim 'Dragonborn' ring

Your own Skyrim ring ! Write your own (character) name in Draconic language..(now it's writing Novastar)

The pictures of the ring are in stainless steel
pictures in stainless steel

Also check out my Skyrim pendant Skyrim pendant .

Personalize your ring by choosing a ring size.
Size 5 / 15
Inner diameter: 0.61 inch / 15.70 mm
Inner circumference: 1.94 inch / 49.21 mm
Size 6 / 16
Inner diameter: 0.64 inch / 16.51 mm
Inner circumference: 2.06 inch / 52.39 mm
Size 7 / 17
Inner diameter: 0.68 inch / 17.35 mm
Inner circumference: 2.19 inch / 55.56 mm
Size 8 / 18
Inner diameter: 0.71 inch / 18.19 mm
Inner circumference: 2.31 inch / 58.74 mm
Size 9 / 19
Inner diameter: 0.74 inch / 18.89 mm
Inner circumference: 2.44 inch / 61.91 mm
Size 10 / 20
Inner diameter: 0.77 inch / 19.84 mm
Inner circumference: 2.56 inch / 65.09 mm
Size 11 / 21
Inner diameter: 0.81 inch / 20.68 mm
Inner circumference: 2.69 inch / 68.26 mm

The ring is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.


IN: 0.983 w x 0.983 d x 0.315 h
CM: 2.498 w x 2.498 d x 0.8 h


Sign In or Join to comment.
@kgrzan00 Thanks, I will try this :)
July 24, 2014, 9:50 pm
@BlackValeKnight this happens a lot with jewelry and a sneaky way to prevent it is to put a coat of clear nail polish on it!
July 22, 2014, 12:42 am
what is the software used to create this ring?
April 21, 2014, 11:58 pm
Service was unacceptable led me on with 3 emails back and forth thinking they could change my order through email after 2 days of that another rep emails me and says it isnt possible to change the order and I have to submit a new one. So I think ok then I didn't really want to deal with them after all this, but it appears they do not refund you the money to your bank account they credit you money towards a purchase to the store so now I have to deal with them or I'd be losing money 1 out of 5 stars this rate will go up if this order goes through and gets here fast.
April 11, 2014, 6:30 pm
@Frogman54 Hi, we're sorry to hear this; we will keep this in mind for future 3D prints, thank you.. J&H
March 4, 2014, 9:20 am
Just received the ring today. I'm really happy with the design, but the size is quite a bit too small. I ordered a size 11 sizing it with my middle finger, figuring that it may shrink a bit during the printing process. The ring just barely fits on my pinky finger. Just want to give warning to those who may order it.
March 3, 2014, 10:24 pm
@Webserfer Hi, you may have a look here for the different metals you refer to:
February 24, 2014, 8:21 am
What exactly is the difference in looks between the gold and bronze, shine and matte? Not much of a jullery person so I cant tell the difference in the photos :P
February 23, 2014, 9:36 am
@shawngiese Sorry for the late reply. I ordered it in the stainless steel.
January 16, 2014, 8:39 am
@BlackValeKnight What material did you order the ring in? I was worried that some materials may not be suitable for rings.
January 1, 2014, 5:19 pm
After waiting a month for the ring Shapeways sent me a cancellation notice because the design they received could not be printed. Any ideas what happened?
January 1, 2014, 5:18 pm
Thankyou so much!!! I got it the day before Christmas and I am really happy with it. My finger is getting a bronze stain on it, so I was wondering if there is a way to prevent this, but if no, that fine.
December 28, 2013, 7:57 pm
Tried to order two, and now my order got cancelled because apparently the model wasnt uploaded in time? and now im only getting one ring and these were supposed to be for me and my boyfriend. Highly upset.
December 10, 2013, 3:27 am
Got it a few months ago, and it still looks good. The only problem that i've had is that the ring, in stainless steel, will stain your finger. I put some nail polish on the inside, and that mostly fixed the problem. The lettering and size are just fine, and i recommend this cool ring to anyone regardless of it's elder scrolls theme. It's just cool.
September 17, 2013, 4:18 am
I see that you have created the ring of the dragonborn and wanted to know if you think that you would be able create the ring of hircine from Skyrim. If you need a 3D model I can provide but the only way is either a video or a lot of pictures because Skyrim has a 3D model of the ring of hircine in the game. Please contact me at
July 20, 2013, 9:25 am
According to your size chart i'm a 13-14. Is there any way i can get a size up? I really don't want to get it as a pinky ring.
May 16, 2013, 3:19 am
Problem, gave it to boyfriend and within 2 days the Antique stain is coming off! What can I put on it to keep it on?
April 16, 2013, 3:48 pm
So if I order I can put in ring size 9.5? I just got fitting at a jewelry store in the mall they said I'm fit for a 9 maybe a tad higher, but I just want to play it safe and 10 might be to big. Wondering if there are just full size increments and I should go with 10.
March 30, 2013, 1:16 am
Received it just a few minutes ago! Truly looks and feels amazing. Wonderful job. And I do agree with "redrumurder" I advise ordering half a size up. Other than that, Antique Bronze looks beautifully aged and well with the color scheme to the game
March 22, 2013, 10:34 pm
Could you please advise what the (wall) thickness of the ring is? Or outside diameter? On some of the images it looks quite thick and I'd like to know if that is still comfortable. Thanks!
February 28, 2013, 1:34 pm
Recieved it today. Awesome!
January 22, 2013, 1:42 pm
Learn from my mistake. I would order half a size up, maybe a full.
January 5, 2013, 7:00 am
im going to buy one!!! im just really confused about the sizes. are the sizes the same as regular rings? like is it the same as this chart?
December 24, 2012, 12:02 am
Your size chart confuses me
December 13, 2012, 8:42 pm
When you say size 9 does that mean it's size 19 ?
November 9, 2012, 3:02 am
i put skyrim as txt and 2.38 as size then stainless steel then when i try to add to cart it says do you want to save or open addb2d2715 from shapeways
October 30, 2012, 3:11 am
Maybe there was something wrong with the website wenn you ordered, because as far as i can see everything is ok and you can order. Please contact me is it is still not possible
October 29, 2012, 10:04 am
it says to open a file. what file?
October 29, 2012, 3:05 am
it says to open a file what file?
October 29, 2012, 3:05 am
it cant add to cart
October 29, 2012, 3:00 am
Is there any reason why a larger size isn't available? Warrior types need a 13/14 size! Thanks!
September 20, 2012, 9:08 pm
Having trouble ordering, blank screen after hitting order now. Forums aren't helping. Help please :(
September 3, 2012, 3:07 am
Will this be coming in silver soon?
June 19, 2012, 4:18 pm
"I see that you've said the pictures are of a stainless steel ring; however, it looks like it's had something else done to it. Will ordering plain stainless steel give my ring the same look? Thanks!" The stainless steel material used at Shapeways is fused with bronze so it gives the ring a very slight yellowish/brown cast.
May 31, 2012, 1:28 pm
Nice to hear you are happy with your ring ! Thanks for ordering one !
May 30, 2012, 7:18 am
Got the ring today and it looks great! Size was perfect, custom runes perfect, feels really nice. I go the stainless steel and I'm very happy. The "rough" finish looks exactly like I would expect a medieval ring to look.
May 30, 2012, 12:39 am
Any chance you might ever get this in silver?
April 13, 2012, 8:01 am
I see that you've said the pictures are of a stainless steel ring; however, it looks like it's had something else done to it. Will ordering plain stainless steel give my ring the same look? Thanks!
March 27, 2012, 12:45 am
the ring sizes are the same as the standard size i describe in the text above, soo if you order a size 8 (18) the Inner diameter will be 0.71 inch / 18.19 mm. I hope this answers your question.
February 27, 2012, 8:17 pm
Are the ring sizes pretty close to standard sizes? I intend to get this as a thumb ring and in standard ring sizers my thumbs an 8. Thanks in advance and great product!
February 27, 2012, 8:10 pm
I'm ok with it
February 6, 2012, 11:02 pm
Yes i also want to put it on sale ;-) but the first print i was not happy with, soo i'm still waiting for the adjusted version of the print...sorry that is takes soo long
February 3, 2012, 8:45 am
Because it is even better then pendent.
February 3, 2012, 5:54 am
When will it come out?
February 3, 2012, 4:20 am
When are you going to put it on sale.
February 1, 2012, 12:51 am
no im just asking if the plastic fells cheap because if it does i want the metal
January 23, 2012, 12:25 am
Hello 2 questions Does this fell cheap and if it does then could you make me a metal one
January 20, 2012, 11:09 pm


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.