A Little Sad Keanu Reeves

A Little Sad Keanu Reeves 3d printed Figurines Miniatures
A Little Sad Keanu Reeves 3d printed Figurines Miniatures
A Little Sad Keanu Reeves 3d printed Figurines Miniatures
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures He's sad because there is no more Fluffed vodka (courtesy of dberkowitz on Pinterest
A Little Sad Keanu Reeves 3d printed Figurines Miniatures He's sad because there is no more Fluffed vodka (courtesy of dberkowitz on Pinterest
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures He's sad because he has no quarters. (courtesy of dberkowitz on Pinterest)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures He's sad because he has no quarters. (courtesy of dberkowitz on Pinterest)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Keanu Reeves playing with himself
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Keanu Reeves playing with himself
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Photography by toy builder idk (from kotaku.com)
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures
A Little Sad Keanu Reeves 3d printed Figurines Miniatures
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures Stainless Steel
A Little Sad Keanu Reeves 3d printed Figurines Miniatures Stainless Steel
Digital Preview

Not a Photo

A Little Sad Keanu Reeves 3d printed Figurines Miniatures
A Little Sad Keanu Reeves 3d printed Figurines Miniatures
Digital Preview

Not a Photo

3d Model Viewer

About this Product

Sad Keanu comes in two sizes. Both are equally sad.


cart.gif Teeny Keanu ($25) cart.gif Little Keanu ($45)

Want to get both?

118x87_403961_149813_1338413388.jpg + 118x87_364717_144316_1338413388.jpg addsetbutton.png



Cheer up, Little Keanu Reeves, it's ok. Just finish your sandwich and march on. Life is like a box of chocolate. Which pill will you choose? There is no spoon. You can't handle the truth! Wait. What was I doing again?



Want to make some 3d printed goodies? Check out my latest project,


Dimensions

IN: 1.935 w x 4.049 d x 2.134 h
CM: 4.914 w x 10.284 d x 5.42 h
Sign In or Join to comment.
 
@Angelofberlin I'm glad you enjoy it. I enjoy Keanu movies as well. I just saw John Wick in theaters. It's a fun movie. Now Mr. Wick is a real Sad Keanu. Even the poster looks like a Sad Keanu walking. Beautiful orchids, by the way! :)
17 hours ago
@cyedwardchow Oh no! I e-mailed service@shapeways.com about this. You should e-mail them too just in case. I don't have access to see your order unfortunately, and I can't authorize a reprint since it was ordered through Shapeways.com. They should be able to sort this out and get you a reprint though!
17 hours ago
Just got my keanu within a short time! It is really a nice figure and I love it much. Yet, I only receive one while I have ordered 2, I have send a msg to u for the details. Please help to arrange for shipment for 2nd figure :)
17 hours ago
Hi! I just wanted to let you know that my Little Sad Keanu arrived this morning. And he has travelled pretty fast: have ordered him only on November 17th. I wanted to give him a place somewhere on my kitchen shelf. But my hubby is a bit jealous of Keanu and doesn’t want to have him around all the time. So I took him with me to my room and now he is sitting on the dvd shelf (with lots of Keanu movies) right in front of my desk under a beautiful white orchid. If he could see what we fans are posting on tumblr about him he wouldn’t be sad any longer – lol Thank you so much that I too have my very personal Little (Sad) Keanu now. He is beautiful and I will do everything to cheer him up. I already ponder on getting him a twin one day ... :-) Greetings from Berlin
November 25, 2014, 9:33 pm
Done. Thanks a lot for the prompt response. Looking forward to receiving the figures soon.
November 20, 2014, 7:37 am
@awcleung Very strange! Not sure what happened there. I've enabled the product for sale again. Sorry about that.
November 20, 2014, 6:54 am
Love the figure but can't buy it from your web site (it says not for sale). Will it be available again sometime later ? Thanks.
November 20, 2014, 6:44 am
@neuralfirings Completed for the buying, i just sent you a Private Messaging about the complete shipping address, plese check it , thanks a lot ^_^
November 14, 2014, 4:31 am
@neuralfirings Roger that,I but it now ^_^
November 14, 2014, 3:40 am
@isaac89615 wow! cool blog post! This is the big one ($45 version).
November 14, 2014, 3:35 am
@neuralfirings Thanks, also i get this pic on a japanese's blog, can you check it is big or small one? the blog's link : http://soko-gan-figure.blog.so-net.ne.jp/2013-09-08
November 14, 2014, 3:22 am
@isaac89615 I am not sure as I did not take that picture, but I think it's the big one. The big one is 4.914 w x 10.284 d x 5.42 h in centimeters. Does that sound right? It should ship in 6 business days. It can take a week or so to reach Hong Kong, though sometimes these packages get stuck in customs which will delay the shipping longer (but that's beyond our control). Hope this helps!
November 14, 2014, 3:12 am
Hello, this is a message from Hong Kong, I am interested in this A Little Sad Keanu Reeves, it is very cool, and i want to buy one to display with Figma, so this which size i need to buy? the big one (45UDS) or the small one (25USD) ? like the picture, thanks~ If i buy it today, when can i get it? Thanks a lot
November 14, 2014, 3:06 am
here you go: http://shpws.me/wtYr -- from the foot to the head is 5.35 inches. I attached a photo to make sure I have the right understanding of how you wanted to scale this model.
October 24, 2014, 8:25 pm
@neuralfirings, so how do I order and pay for the custom sized 5.35" tall Keanu?
October 24, 2014, 8:00 pm
@neuralfirings. Sounds good to me. Lets do it, standard post is fine. Do you have to create an invoice or something now?
October 24, 2014, 12:53 am
@stopmoeric It print in 6 business days. Then for shipping, you have the option of selecting faster or standard post.
October 23, 2014, 8:10 pm
@neuralfirings I decided it's worth throwing down for a larger keanu. How soon can I get him? As mentioned before, I want him at 10th scale, which is roughly 5.35" tall.
October 23, 2014, 8:01 pm
very very sad)))
October 11, 2014, 7:51 pm
@stopmoeric That would more than double the price, roughly $100
October 3, 2014, 11:47 pm
@neuralfirings Is there anyway you could pump up the scale and do a one-off print at a 10th scale? I believe would make this figure around 5.35"
October 3, 2014, 11:20 pm
Is this from a specific scene?
August 18, 2014, 9:26 pm
“Unhappy is he to whom the memories of childhood bring only fear and sadness.” ? H.P. Lovecraft
February 1, 2014, 10:50 pm
@Bastidge_Child Another solution to superglue blooming: sit a fan nearby. It doesn't have to be blowing hard - just keeping the air moving around the work area. Cyanoacrylate adhesives polymerize in the presence of water - and their vapors deposit on the surface where there is residual moisture. You can't do much about the moisture - and even low bloom adhesive will bloom in the presence of sufficient humidity and minimal airflow - but you can keep the air moving while the CA sets. On many materials, you can also do some cleanup of blooming with acetone. Apply to a q-tip or a makeup square. You don't want much because it'll seep into the seams and weaken the bond - but carefully applied it will 'erase' the bloom.
January 22, 2014, 6:27 pm
Any chance I could get a park bench to go with my Teeny Keanu order? Willing to pay extra for the park bench. Haven't put in the order yet because I'd like the bench to be at matching scale. (This will be for my bonsai tree.)
January 22, 2014, 7:48 am
Much better.
January 9, 2014, 8:12 pm
Howdy! Keanu is now sad on our homepage :) Enjoy!
November 25, 2013, 2:53 pm
When using superglue on models you need to buy low-bloom (low odor) type. The colour isn't sucked out but the drying glue is hazing/frosting the white stuff (which is a layer of glue being laid down). For plastic models you'd sand it off and polish but for this sandstone model you're out of luck probably.
October 11, 2013, 12:03 pm
hilarious
August 14, 2013, 5:02 am
@prateekj It is completely solid!
May 31, 2013, 5:23 am
I want one... my Instagram would never be the same. I would be hunting down some little blue flowers to make him happy.
May 31, 2013, 4:08 am
AWSOME AS HELL WHAT DO YOU USE FOR IT
April 22, 2013, 12:54 am
Really like the design. Would be perfect on my office desk! Just not sure, is this hollow from inside or solid?
April 8, 2013, 12:55 pm
@krof.drakula Ha! just noticed this one. Is he sad because his CSS won't look right?
March 11, 2013, 2:20 am
Action shot!
February 21, 2013, 9:04 pm
@neuralfirings http://i.imgur.com/M2SndKE.jpg I used Loctite control liquid super glue. The break was right at his shirt collar. The color sucked out of his head and face, leaving it pale, even for keanu.
February 1, 2013, 1:53 am
@WayGroovy awww, that's truly sad. What kind of superglue did you use? I've superglued PLENTY of sandstone color pieces.. including an amputated Sad Keanu. Here's a picture w/ the arrow pointing on where I superglued: https://www.evernote.com/shard/s6/sh/48e32105-74f9-4efa-b67a-2519a2cf7504/06463a3388559d076155604d7177ebf5
January 31, 2013, 4:51 pm
Whoa.
January 31, 2013, 4:12 pm
I had a sad little keanu. His head fell off, when he fell off my monitor. I tried to superglue it back on, It sucked the color out of his head. Do not superglue together the sandstone 3d printed items.
January 23, 2013, 2:46 pm
@neuralfirings Thanks so much man. that helps alot. Kinda lost me on the math part lol.. But I will figure that out.. I have always been creative and figured stuff out on my own, but the math is where It takes me awhile. Ill keep intouch with you, I am sure I will have more questions.
January 22, 2013, 7:00 pm
@Tjsolo you should export s VRML2 (.wrl) or X3D (.x3d). Two things to be aware of: 1) You need to upload a zipped file contain the model (.wrl/.x3d) and the texture maps (.jpg/.png) 2) These file types default to meter scale. So unit of 1 = 1 meter. This means if you create something 4 inches/10 centimeter, make sure it is 0.1 units tall. Let me know if you have any more questions!
January 22, 2013, 6:52 pm
@neuralfirings Thanks :-) .. I found that out not to long after posting it. one more question tho. Witch file type does if have to be exported as? to be able to print in sandstone full color?
January 22, 2013, 6:47 pm
@Tjsolo if you use a UV Texture Map (http://www.youtube.com/watch?v=obB9T3jXlak), you can print in color with the material Full Color Sandstone
January 22, 2013, 6:42 pm
@neuralfirings How where you able to have that printed in multiple colors???
January 15, 2013, 2:00 am
I didn't realize just how impactful this design was until I noticed that I have dressed just like your lil' keanu several times since seeing it.
January 10, 2013, 7:24 pm
Nice work, your design is in the top ten most viewed 3D printed designs of 2012!!! http://www.shapeways.com/blog/archives/1854-10-Most-Viewed-3D-Printed-Products-of-2012-on-Shapeways.html
December 28, 2012, 4:36 pm
I just ordered mine! I'm so excited! Best 51 dollars I've ever spent. Bar none!
November 3, 2012, 7:43 am
Received my Sad Little Keanu recently and I love him! He's very heavy and looks (and feels) like concrete. Very detailed and cute! He has hit own little wooden bench that he's sitting on, being harassed by my Rapeface Woody doll. Tempted to her a Teeny Keanu to sit on top of my TV but I think I'll just stick with the standard size.
October 26, 2012, 7:12 am
You guys realize he actually has had a pretty rough life, right?
September 29, 2012, 4:30 am
An animated version....Dunken K Bliths https://plus.google.com/u/0/101241183982769454084/posts/6pAYbr5EVKR
September 29, 2012, 12:43 am
@BIGBala -- good luck! Maybe a bagel sandwich would make him happy, or a serenade? http://www.youtube.com/watch?v=kcsemGUl0xM
September 25, 2012, 3:14 pm
Ordered me a teeny one! Excited to try my best to make Teeny Sad Keanu smile!
September 25, 2012, 3:12 pm
@squireshillcottage I'm so happy you like little Keanu! The material is a bit brittle, sad Keanu cannot survive a sad fall. Poor guy!
January 23, 2012, 6:34 pm
Just unpacked my sad little Keanu and he is sitting forlornly on top of my iMac screen. A very impressive addition to the world of things and worth every single hard earned penny in my opinion. I've no idea how strong he is though - very heavy for a little fella. But then he does look like he's got all the weight of the world on his shoulders.
January 22, 2012, 7:07 pm
Comment text...
January 22, 2012, 7:02 pm
Hey all! Thanks for the comments. :) First, I think I owe a disclaimer: I did not model this one. I know I know.. I had a friend model it as a side project. But I agree, he did a SMASHING job! Second, yes it's a little pricey. That's why I made an ittier bittier one: http://www.shapeways.com/model/403961/ -- that one is about 2/3rds the size and more than 50% off ($19.99). Wowza! Happy to take any request for other products you'd like to see. I was thinking of making Potter Puppet Pal finger puppets. It would be great to get the arms to move. Hmm..
January 3, 2012, 9:00 pm
Ha, ha, nice model, but a little expensive. You need to stick a hole somewhere in Keanu, use your imagination, and hollow him out a little.
January 3, 2012, 7:48 pm
Something about him related to The Matrix and you got a buyer. Nice figure.
December 30, 2011, 10:08 pm
really nice!
December 29, 2011, 11:18 am
Fantastic! :-)
December 22, 2011, 4:11 pm
really nice!
December 21, 2011, 5:22 pm
Excellent sculpt.
December 18, 2011, 8:34 pm
awesome!
December 16, 2011, 1:00 pm
 
  • Full Color Sandstone

    Fully colored material with a coarse finish and a delicate feel.

    $45.00
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.