2 in 1 tool for cutting foam, or other easy to cut materials. You can cut 90 & 45 degree angles.
Designed for use with a utility-style razor blade. Place the blade on either the 90 or 45 degree side and lightly screw on the cover plate. Set the depth. By placing the block on the edge if the foam. Allow the blade to slide down to the cutting surface. And tighten the screws. Now your ready to cut perfect 45 of 90 degree angles.
**ITEMS NEEDED TO COMPLETE**
1 - Utility-Style Razor Blade
2 - 4-40 x 1/4" or M6 x 6/8mm screws
A cutting tap for 4-40 or M6 screws. To clear out the threads for the screws.