V2.5 UMX Beast Wheel Pants
The Beast shown here with the Wheel Pants and Spinner. (Plane and Spinner Not Included)
The Beast shown here with the Wheel Pants and Spinner. (Plane and Spinner Not Included)
Front and side view of the pants assembled
Shapeways Computer Generated Image
The Beast wheel Pants weigh 2.59g.
Now V2.5.1!
There was an occasional failure to print, approx 1 out of every 8 were rejected for thin walls. The problem has been fixed.
Do you love your UMX Beast, but are tired of breaking those flimsy, profile OEM foam Wheel Pants? Upgrade to these scale, virtually indestructable Wheel Pants.
These wheel pants have been designed to work with the OEM, wire landing gear and wheels.
Due to the 3D printing process, some holes will need to be "cleaned out" with a drill bit. Don't worry! The holes are there, there is just some residual material left in the holes from the process of creating these. I recommend using both a 1.25mm & 1.0mm drill bits and a hobby knife.
I am currently only offering these in the White, Strong, Flexible Material and all it's varieties. For more information on this amazing material and process can be found here, www.shapeways.com/materials/white_strong_flexible. Also check out all the other materials that are now possible using 3D printing, www.shapeways.com/materials/.
***Recomended items for the best fit***
1pc. - OEM wire landing gear
2pc. - OEM foam wheels
1.0 & 1.25mm drill bits
Hobby Knife
A length of fishing line (for an extra measure of security)
******I will update soon with a link on the installation process.******
There was an occasional failure to print, approx 1 out of every 8 were rejected for thin walls. The problem has been fixed.
Do you love your UMX Beast, but are tired of breaking those flimsy, profile OEM foam Wheel Pants? Upgrade to these scale, virtually indestructable Wheel Pants.
These wheel pants have been designed to work with the OEM, wire landing gear and wheels.
Due to the 3D printing process, some holes will need to be "cleaned out" with a drill bit. Don't worry! The holes are there, there is just some residual material left in the holes from the process of creating these. I recommend using both a 1.25mm & 1.0mm drill bits and a hobby knife.
I am currently only offering these in the White, Strong, Flexible Material and all it's varieties. For more information on this amazing material and process can be found here, www.shapeways.com/materials/white_strong_flexible. Also check out all the other materials that are now possible using 3D printing, www.shapeways.com/materials/.
***Recomended items for the best fit***
1pc. - OEM wire landing gear
2pc. - OEM foam wheels
1.0 & 1.25mm drill bits
Hobby Knife
A length of fishing line (for an extra measure of security)
******I will update soon with a link on the installation process.******
cm:
6.04 w x
3.26 d x
1.68 h
in:
2.4 w x
1.3 d x
0.7 h
Related items in Miniatures
Select Country & Currency
$ United States
Choose Currency
Select Material
-
White Strong & Flexible
$8.75
-
White Strong & Flexible
$8.75 -
White Strong & Flexible Polished
$9.50 -
Black Strong & Flexible
$9.75
Twitter
Comments