You must be logged in and verified to contact the designer.
Product Description
<p>REVISED: Shapeways was printing these arms standing up which is believed to have caused them to be weaker. The design has been slightly revised and reoriented.</p><p> </p><p>These arms allow for the use of B4 style offset wheels (non hex) on the front while retaining the stock RC10 caster blocks and spindles. The front end width approximates the B4 and other modern buggies. If using SC10 front hubs so you can use hex style front wheels, these arms will make the front TOO WIDE!!! These arms require the end user to slightly enlarge the hinge pin holes with 1/8" bit by hand to clean up the holes from printing. The shock mount holes need to be drilled larger using a 5/64" drill bit. Do NOT just run a screw into them without drilling them! </p><p> </p><p>Check out Raborn Racing Originals on Facebook!</p>
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: