1/400 NASA LUT Swingarms-Pivots-Supports-Damping

This is the swingarm set to compliment my 1/400 scale LUT. The arms are designed to clip into the pivots, which are then fitted to the frame of the LUT with a touch of glue. The supports will also need to be located on the frame (these support the swingarms when retracted). You will need to find images of the LUT to determine the position of each arm (which is numbered on the model). I have provided 10 pivots & supports to give a couple of spares should you lose one (they are quite small). I've also supplied two number 5 swingarms, one of which is slightly longer, for use with the Saturn 1B LUT configuration. You will also find the damping arm which supports the rocket. This has two tabs, so you can set it horizontal (when being moved on the crawler) or vertical (just before take-off). I have just seen some better photos of how the damping arm attaches to the LUT, so I've now updated the damping arm and the upper levels of the LUT to suit.