Version 2.5 is available here
This product has been deprecated, and the above link takes you to an improved version
These customisable legs for the DJI Phantom and Phantom 2 quadrotors are designed to be collapsible to save room during travel. The optional skids detach and the legs fold inwardly, greatly reducing the profile of the Phantom.
This is the sister product of the regular, slightly longer
DJI Phantom Foldable legs
Development thread
V2 changes:
Compass holder now integrated with leg
Antenna holes widened and integrated with leg
Height extended to make optional extensions redundant
Compatible Products:
DJI Phantom
DJI Phantom FC40
DJI Phantom 2
DJI Phantom 2 Vision
DJI Phantom 2 Vision+
DJI Phantom 2 Vision Universal Camera Mount Lite
DJI Phantom 2 Universal Camera Mount Lite
DJI Phantom 2 Universal Camera Mount
Necessary components:
4x M3x15 bolts
4-8x standard M3 nuts, as used to attach the stock Phantom 2 legs
2x Landing gear skids from ShapewaysOptional components:
- 4x M3 thumbscrews
Installation instructions:
Remove existing camera mounts if they block the screws for the legs
Unwrap tape around antennas
Disconnect compass from cable, be sure to not put compass near magnetic items.
Unscrew stock legs
Remove legs, being careful to remove compass cable before DJI Vision cable
Place hip joints so that their joint flares outwards
Screw hip joints to Phantom
Place nut into hex cavity on each leg, using a hammer if necessary
Put legs into hips with nut facing inwards towards Phantom body
Screw M3x15 bolt into each leg socket from the exterior side
Place optional nuts on interior of M3x15 bolt
Unscrew compass from stock legs, being careful not to place it near anything magnetic
Screw compass into compass holder
Either tape antennas to legs or use clips to do the same.
Attach optional skids