Petal lens hood for Phantom 2 Vision+

Petal lens hood for Phantom 2 Vision+ 3d printed Maker/DIY
Petal lens hood for Phantom 2 Vision+ 3d printed Maker/DIY
Petal lens hood for Phantom 2 Vision+ 3d printed Maker/DIY
Digital Preview

Not a Photo

Petal lens hood for Phantom 2 Vision+ 3d printed Maker/DIY
Petal lens hood for Phantom 2 Vision+ 3d printed Maker/DIY
Digital Preview

Not a Photo

3d Model Viewer

About this Product

This is a small, lightweight (<1gm) lens hood for the camera on the DJI Phantom 2 Vision+. It's sized to stay out of the frame for stills. Because the frame of video is slightly smaller, it can be slid forward approximately 2x the width of the base ring and secured for maximum effect with video. It fits the lens barrel without any extra space but a bit of tape or a rubber band should be used to secure it.

Dimensions

IN: 1.082 w x 1.082 d x 1.013 h
CM: 2.748 w x 2.748 d x 2.574 h
Sign In or Join to comment.
 
I hope you enjoy your hood. Use of tape or rubber band is part of the design to allow the lightest possible product. The need for tape/rubber band is documented in the last line of the description.
August 25, 2014, 2:14 am
The lens hood fits over the Phantom 2 Vision + camera lens but it does not fit tight. If the camera points down the hood will fall off. What I did for a temporary fix was to use a small diameter rubber band over the lens hood. It helps to squeeze down the hood frame at the same time the rubber band touches the sides of the lens and provide additional grip to keep it from sliding. I would not fly without doing this...If I would have taken off after putting on the hood it would have been long gone if I had pointed the camera down during the flight.
August 25, 2014, 1:14 am
Thank you for exellent delivery to Norway!
July 12, 2014, 4:34 pm
It's ok
July 10, 2014, 10:03 pm
 
  • Black Strong & Flexible

    Black nylon plastic with a matte finish and slight grainy feel.

    $9.75
Buy Now
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.