Basic - Body

Basic - Body 3d printed Maker/DIY
Basic - Body 3d printed Maker/DIY
Basic - Body 3d printed Maker/DIY
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY
Basic - Body 3d printed Maker/DIY
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY
Basic - Body 3d printed Maker/DIY
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Frosted Detail
Basic - Body 3d printed Maker/DIY Frosted Detail
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Purple Strong & Flexible Polished
Basic - Body 3d printed Maker/DIY Purple Strong & Flexible Polished
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY White Detail
Basic - Body 3d printed Maker/DIY White Detail
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Frosted Ultra Detail
Basic - Body 3d printed Maker/DIY Frosted Ultra Detail
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Metallic Plastic
Basic - Body 3d printed Maker/DIY Metallic Plastic
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Blue Strong & Flexible Polished
Basic - Body 3d printed Maker/DIY Blue Strong & Flexible Polished
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY White Strong & Flexible Polished
Basic - Body 3d printed Maker/DIY White Strong & Flexible Polished
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Polished Metallic Plastic
Basic - Body 3d printed Maker/DIY Polished Metallic Plastic
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Black Detail
Basic - Body 3d printed Maker/DIY Black Detail
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Black Strong & Flexible
Basic - Body 3d printed Maker/DIY Black Strong & Flexible
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Pink Strong & Flexible Polished
Basic - Body 3d printed Maker/DIY Pink Strong & Flexible Polished
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Red Strong & Flexible Polished
Basic - Body 3d printed Maker/DIY Red Strong & Flexible Polished
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY Transparent Detail
Basic - Body 3d printed Maker/DIY Transparent Detail
Digital Preview

Not a Photo

Basic - Body 3d printed Maker/DIY
Basic - Body 3d printed Maker/DIY
Digital Preview

Not a Photo

3d Model Viewer

About this Product

You need to purchase one body, one door, one set of joined clamps and one set of joined buttons to build a complete enclosure! There is ZERO markup on this mod! This is a very simple but nice little mod that would be great for a first time builder. The door is held on with magnets so you can replace the battery. You need two 1/8" by 1/16" rare earth magnets for the body and two in the door. This uses the DNA20 or DNA30, Keystone 1042 single 18650 battery holder and the 510 connector of your choosing. The hole in the top is 8.5mm in diameter which is just under the size of a typical press in connector. If you don't have a printer go ahead and get it printed here on shapeways otherwise this model will be downloadable and should be printable on a filament printer. Testing is underway on my Makergear M2. More information is available at the following url: http://imgur.com/a/1ktsX

Dimensions

IN: 1.102 w x 3.74 d x 1.85 h
CM: 2.8 w x 9.5 d x 4.7 h
Sign In or Join to comment.
 
@ohhmaro It depends on the materials you select for all of the parts. The best to see the complete price is to add everything to your shopping cart. You can always delete them if you decide not to purchase.
June 28, 2014, 1:45 pm
@jonniemac hello, I'm interested with this model. if i purchased a complete sets, how much does it cost? tq :)
June 28, 2014, 1:42 pm
@xPaKe If you are using a DNA30 board you need around 12 amps of hold for the PTC resettable fuses. A DNA20 needs around 7. I use two small SMD fuses in parallel on my DNA30 builds. They are available at Mouser and Digi-key and most likely other places as well. Here is a link to the fuse at Digi-key. http://www.digikey.com/product-detail/en/2920L700SLPR/F6137CT-ND/4147147
April 2, 2014, 8:16 pm
@jonniemac Thanks a ton, btw if i don't use any charging board what fuse I need? Links to part in general would make me feel awsome =3
April 2, 2014, 8:13 pm
@xPaKe Yes, the hole in the top is 8.5 millimeters in diameter. A press in 510 connector is about 8.65 millimeters in diameter. It's just there as a start for people to finish or to tap to their preferred 510 connector.
April 2, 2014, 8:10 pm
Is the 510 connection only hole in this mod? So could I use 30D with this? If I drilled the button holes different than the 20/30 mods that are longer? looking forward building one of these mods.
April 2, 2014, 8:08 pm
 
  • White Strong & Flexible

    White nylon plastic with a matte finish and slight grainy feel.

    $35.58
Buy Now
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.