Our Gift to You: 20% off your own designs in Strong & Flexible Plastic through Dec 23, with promo code MY2014 · details

Phantom 1.5 Battery Door - Stock LED Board Version

Phantom 1.5 Battery Door - Stock LED Board Version 3d printed Accessories Gadgets
Phantom 1.5 Battery Door - Stock LED Board Version 3d printed Accessories Gadgets
Phantom 1.5 Battery Door - Stock LED Board Version 3d printed Accessories Gadgets
Digital Preview

Not a Photo

Phantom 1.5 Battery Door - Stock LED Board Version 3d printed Accessories Gadgets Black Strong & Flexible
Phantom 1.5 Battery Door - Stock LED Board Version 3d printed Accessories Gadgets Black Strong & Flexible
Digital Preview

Not a Photo

Phantom 1.5 Battery Door - Stock LED Board Version 3d printed Accessories Gadgets
Phantom 1.5 Battery Door - Stock LED Board Version 3d printed Accessories Gadgets
Digital Preview

Not a Photo

3d Model Viewer

About this Product

Phantom 2 Door for Phantom 1.5 conversion.

Many models availabe. This models is:

  • Internal Depth: 19.5mm
  • Side Holes for XT60?: Yes (2)
  • Rear Design Feature: Hole for stock Phantom 1 Status LED

The Phantom 1 LED board mounts to the door exactly like it does to the Phantom 1. The board screws into the frosted dome and the door is sandwhiched between them. On this mode the dimesions of the hole are identical to the Phantom 1 hole. Please note you will need to extend the LED wiring from the NAZA (easy job).

*** - Please Note - *** As with any Shapeways product please be aware of what you are buying. This is a custom designed part not mass produced. It has a slighty rough finish (but nothing that will scratch items). I make every effort to test all my designs but I regret manufacturers do change their products from time to time. If in doubt please contact me.

- d3wey -


Dimensions

IN: 3.126 w x 0.954 d x 1.752 h
CM: 7.94 w x 2.424 d x 4.45 h
Sign In or Join to comment.
 
Hey there Dewey! I really am thinking about do this conversion to a Phantom 1.5 and using your door! Great design! My only question about the process is the LED extension wire. What cable did you use to extend the Phantom's LED? What I think I can use is a servo extension cable right? Like this: http://hobbyking.com/hobbyking/store/__32758__10CM_Servo_Lead_Extention_JR_26AWG_10pcs_bag_.html Or this: http://hobbyking.com/hobbyking/store/__9771__Twisted_15CM_Servo_Lead_Extention_JR_22AWG_5pcs_set_.html If not, could you provide a link or the exact name? (Hobbyking would be great, but anything is fine too) Thanks!
July 4, 2014, 1:55 pm
 
  • White Strong & Flexible

    White nylon plastic with a matte finish and slight grainy feel.

    $21.76
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.