Get the best of 3D Printing in your inbox, plus exclusive offers and recommendations from the Shapeways team.
This is the d3wey Custom FPV Undertray for the DJI Phantom 2. It is designed around the Fatshark Predator V2 kit but can be used for other kits (please check measurements).
The tray is fitted to the Phantom via "4 x M3 25mm Brass Hex Spacers" (not included). They can be sourced from Ebay for about £2 - £3.
The spacers replace the inner screw on each of the Phantom's landing legs. The tray then sits on the spacers and the original M3 leg screws are used to attach the tray to the spacers.
The TX slides into the custom slot and is fixed in place with the supplied door which can either be sealed with small nuts/bolts (not supplied) or string/wire.
The internal dimensions of the TX holder are:
This listing is for the Undertray only... some photos also show the Fatshark Filter Housing mounted (available in the shop)
The Phantom 2 version of the tray is designed to make it possible to remove the Phantom 2 battery still. It is also designed to fit around the old style and new style Zenmuse mounting brackets. I am sure that it will fit around other gimbals too. Dimensions of the space can be submitted on request.
*** - Please Note - *** As with any Shapeways product please be aware of what you are buying. This is a custom designed part not mass produced. It has a slighty rough finish (but nothing that will scratch items). I make every effort to test all my designs but I regret manufacturers do change their products from time to time. If in doubt please contact me.
- d3wey -