Mount your GPS/Compass on this foldable arm to isolate it from interference during flight.
Because this GPS/Compass Mount is foldable it makes it ideal for traveling with you multirotor.
The M3 Screw hole/Hex Nut imprint in the base mount makes istalling it on to your multirotor main body easy.
The GPS unit can be easily mounted with 1mm thick double side tape on to the GPS cup mount (top mount).
Main product Features:
Base mount and hinge are 3d printed as one ready part
Place a M3 hex nut in to the hex nut imprint in the base mount under the hinge (you can slide in right in).
Use a M3 screw (in the desired length) for mounting the base mount on to you multirotor main body.
Install the 6mm tube (in the desired length) in to the main hinge and instal the gps mount on the other end, and lock it with a M3x6 screw.
Use 1mm thick double side tape for mounting the GPS unit on to the GPS mount.
!See video and photos above for an impression and building instructions.
Package contents includes:
1 - GPS Mount
1 - GPS base/hinge Mount (should be printed as one single moving part)
Not included but required:
1 - M3x6 screws (for GPS mount)Check your local DIY shop or eBay
1 - M3 screw (for mounting on to your multirotor frame)Check your local DIY shop or eBay
1 - M3 nut (for base mount)Check your local DIY shop or eBay
1 - 6mm aluminum or carbon tubing (choose your own length) Check your local DIY shop or eBay for 6mm hollow aluminium tubing. And for 6mm hollow carbon fiber tubing check eBay.
In active (unfolded) position there is no clearance so when it is locked in active position there is no play and makes it a solid construction during flight.
When In folded position there is a small clearance between the base mount and the hinge (printed as one part), because of this clearance there is some play between the parts in folded (inactive) position.
I can not be held responsible for any kind of defects or damage that arise when performing this upgrade
If you have any comments, feedback or questions please contact me or leave a comment below.
And if you like this product please like this page or leave a comment below.