secureGrip for iPhone 5/5s

secureGrip for iPhone 5/5s 3d printed Gadgets Cases
secureGrip for iPhone 5/5s is a simple half and half bumper style case with a finger hold built in to prevent opportunist thieves from snatching and running off with your pride and joy.

This model is intended for right hand use - a left handed model is on the cards.

My test print (shown) in unpolished White, Strong and Flexible has been test-fitted to my own iPhone 5s, and it's a perfect, snug fit.

The White, Strong and Flexible material gets grubby really fast - to keep your WSF case good looking I recommend a light sanding of the outer surfaces, followed by coat or three of clear varnish. WSF is very porous and absorbs varnish well, so multiple coats are recommended. This post treatment will ensure your case stays good looking for as long as possible.
cm: 7.78 w x 1 d x 12.6 h
in: 3.063 w x 0.394 d x 4.961 h


Brilliant :)
November 25, 2013, 9:31 am
  • White Strong & Flexible

    White nylon plastic with a matte finish and slight grainy feel.


Favorited by