A UAS Universal Anti-Vibration Mount for radio, flight controller, BEC's, etc. To be used with a carbon fiber plate on top to hold equipment. Four 9mm x 13mm dampeners are required to complete this mount ( 60 gram Damper or 50 gram damper, HobbyKing http://www.hobbyking.com/hobbyking/store/__40603__Vibration_Damping_Ball_65g_Bag_of_8_.html or http://www.hobbyking.com/hobbyking/store/__40612__Vibration_Damping_Ball_50gram_8_pcs_bag_.html ). Damper used will depend upon weight of equipment mounted to the Dragon Universal Anti-Vibration Mount V1.0 The Dragon Universal Anti-Vibration Mount V1.0 can be used by itself with the square section mounted to the UAS and a flight controller (KK2 for example) mounted to the circular section. The circular section has slots that can handle square PCB screw patterns from 39 mm to 49 mm at 90* or 45* angles. If the Circular section is mounted to the UAS the square section can have a 86mm X 86mm (or larger) plate bolted to it that all your control electronics can be mounted to. Screw holes for the square section are a 79mm square pattern. The square or circular sections can be mounted to the UAS or radio plate with screws or with double sided tape.


IN: 3.424 w x 0.7 d x 3.424 h
CM: 8.698 w x 1.778 d x 8.698 h


Sign In or Join to comment.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.