A UAS Universal Anti-Vibration Mount for radio, flight controller, BEC's, etc.
To be used with a carbon fiber plate on top to hold equipment.
Four 9mm x 13mm dampeners are required to complete this mount ( 60 gram Damper or 50 gram damper, HobbyKing http://www.hobbyking.com/hobbyking/store/__40603__Vibration_Damping_Ball_65g_Bag_of_8_.html or http://www.hobbyking.com/hobbyking/store/__40612__Vibration_Damping_Ball_50gram_8_pcs_bag_.html ). Damper used will depend upon weight of equipment mounted to the Dragon Universal Anti-Vibration Mount V1.0
The Dragon Universal Anti-Vibration Mount V1.0 can be used by itself with the square section mounted to the UAS and a flight controller (KK2 for example) mounted to the circular section. The circular section has slots that can handle square PCB screw patterns from 39 mm to 49 mm at 90* or 45* angles.
If the Circular section is mounted to the UAS the square section can have a 86mm X 86mm (or larger) plate bolted to it that all your control electronics can be mounted to. Screw holes for the square section are a 79mm square pattern.
The square or circular sections can be mounted to the UAS or radio plate with screws or with double sided tape.