DJI Phantom Foldable Battery Landing Gear

by maikelsdesign
DJI Phantom Foldable Battery Landing Gear 3d printed Accessories Maker/DIY DJI Phantom Foldable Battery Landing Gear overview
DJI Phantom Foldable Battery Landing Gear overview
  • White

    White nylon plastic with a matte finish and slight grainy feel.

Buy Now
DJI Phantom Foldable Battery Landing Gear

Take you DJI Phantom everywhere you want to go with this easy to use and custom DJI Phantom Foldable Battery Landing Gear and upgrade your in flight battery capacity with the integrated battery mounts, which allows you to mount two batteries in a parallel setup for longer flight times. The steep front leg design makes this landing gear ideal for use with a gimbal, and in addition it also looks great on your Phantom. De Compact foldable design even gives you more storage space in your travel case

Depending on your Phantom (Naza-M) voltage settings you can get 12 to 20 minutes of flight-time in parallel setup.

Main Product Features:
  • Portable
  • Compact foldable design for even more storage space in your travel case
  • Parallel battery setup for longer flight times (tested with 2200mAh Lipo's)
  • Secure all parts quickly and easily with M3 screws
  • Suitable for use with a small, medium and large gimbal (see additional comment below)
  • Custom leg hight (In the pictures I use 160mm long legs/tubing)
  • Sturdy feet
  • Is made of the material Strong and Flexible (available in six colors)

  • Recommended Additional Upgrades:
  • Power Battery door Upgrade
  • Custom color front feet set

    • !See video and photos above for an impression and building instructions.
    Package contents includes:
  • 2 - 7 gram landing gear holders with integrated battery mounts
  • 2 - 1 gram front landing gear hinges
  • 2 - 1 gram rear landing gear hinges
  • 1 - 1 gram Compass Mount
  • 1 - 1 gram Antenna Mount
  • 4 - 1 gram Leg Ends (feet)

  • Not included but required:
  • 5 - M3x6 screwsCheck your local DIY shop or eBay
  • Small piece of tape (for mounting the antenna on to the antenna mount)
  • 4 - 6mm aluminum or carbon tubing (choose your own length)
    Check your local DIY shop or eBay for 6mm hollow aluminium tubing.
    And for 6mm hollow carbon fiber tubing check eBay.

  • Additional comments:
    • Depending of the size of you gimbal mount it can be to big for use with a parallel battery setup. If this is the case you need to lower your gimbal with some kind of filler piece.
    • For loosening and fastening the phantom compass don't use a screwdriver with a magnetic head!! And make sure that you mount the compass perpendicular to the body, in a vertical position for best flight performance.
    • If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).
    • For best flight performance I recommend you do a compass calibration after installing this upgrade.

    The Power Battery door upgrade shown in the photos and video above is not included with this landing gear and is available as an separate upgrade.
    I can not be held responsible for any kind of defects or damage that arise when performing this upgrade

    If you have any comments, feedback or questions please contact me or leave a comment below.
    And if you like this product please like this page or leave a comment below.

    Thanks and have Fun flying your Phantom!!

    Want to get a set?

    + +

    Want to get a set?


    Want to get a set?



    IN: 6.204 w x 1.001 d x 7.122 h
    CM: 15.758 w x 2.542 d x 18.09 h


    Sign In or Join to comment.
    This is my phantom after the integration of the Foldable Battery Landing Gear. With the Zenmuse Gimbel installed there is no room for the batteries, so I used in addition an other battery holder.
    January 5, 2014, 8:48 am
    When can we expect a new foldable landing gear based on the new released Phantom 2 (or Vision)? Existing customers only would need a upgrade on one side (canbus holder and a extra antenna holder). Any ideas?
    December 30, 2013, 12:20 am
    @Wouterjansen60 Thanks, the blue batteryholders in the images are not the batterieholders but are the batteries. The battery holders are the shelves that are located between the front and rear frames (that connects the two frames with each other). For battery mount instructions see this video from minute 2:50.
    October 19, 2013, 2:52 pm
    Nice landing gear, i bought it, however i thought the blue batteryholders were included aswell, but it was not,....
    October 19, 2013, 11:35 am


    We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

    Click anywhere outside this window to continue.