DJI Phantom Wide Landing Gear

Give your DJI Phantom a custom look with this beautiful landing gear.
The steep front leg design makes this landing gear ideal for use with a gimbal, and in addition it also looks great on your Phantom.

Main Product Features:
  • Suitable for use with a small, medium and large gimbal
  • Secure all parts quickly and easily with M3 screws
  • Sturdy feet
  • Custom leg hight (In the pictures I use 160mm long legs/tubing)
  • Is made of the material Strong and Flexible (available in six colors)

  • Recommended Additional Upgrades:
  • Battery door Upgrade or the BIG Battery door Upgrade
  • Custom color front feet set

    • !See video and photos above for an impression and building instructions.

    Package contents includes:
  • 2 - 4 gram front landing gear holders
  • 2 - 3 gram rear landing gear holders
  • 1 - 1 gram Compass Mount
  • 4 - 1 gram Leg Ends (feet)

  • Not included but required:
  • 9 - M3x6 screwsCheck your local DIY shop or eBay
  • Velcro tape (for locking horizontal battery movements)
  • Velcro (for easy battery mounting)
  • Small piece of tape (for mounting the antenna on to the leg)
  • 4 - 6mm aluminum or carbon tubing (choose your own length)
    Check your local DIY shop or eBay for 6mm hollow aluminium tubing.
    And for 6mm hollow carbon fiber tubing check eBay.

  • Additional comments:
    • For loosening and fastening the phantom compass don't use a screwdriver with a magnetic head!! And make sure that you mount the compass perpendicular to the body, in a vertical position for best flight performance.
    • If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).
    • For best flight performance I recommend you do a compass calibration after installing this upgrade.

    I can not be held responsible for any kind of defects or damage that arise when performing this upgrade

    If you have any comments, feedback or questions please contact me or leave a comment below.
    And if you like this product please like this page or leave a comment below.

    Thanks and have Fun flying your Phantom!!

    Want to get a set?

    + +

    Want to get a set?


    Want to get a set?



    IN: 2.582 w x 0.689 d x 5.743 h
    CM: 6.558 w x 1.75 d x 14.588 h


    Sign In or Join to comment.
    @greeneagleking I will do my best but I can not guarantee it.
    April 7, 2014, 12:45 pm
    @maikelsdesign Thanks for the fast response. I'm from the UK and going away in June and want them before then, will the legs in development be completed and shipped before then or shall I stick with your current legs?
    April 5, 2014, 1:47 pm
    @greeneagleking For both landing gears you need a screw driver to unlock the legs. The lock screws are optional tho so if you choose not to lock the legs you can easily attach / detach the legs without the need of tools. The down side of this is that the legs probably will get looser over time because of the wear and tear from attaching and detaching the legs, so it’s possible but at your own risk. I’m currently developing a version of the Mark-1 Landing gear where you can easily attach/detach the legs without the need of tools, but it will not be available in the very near future.
    April 5, 2014, 9:10 am
    @maikelsdesign I'm looking for some retractable/easily removable legs. e.g. i can quickly remove the aluminum/carbon legs without having to get a screwdriver out. Can you quickly remove the legs on both the wide landing legs and fold able legs? if so what would you recommend ? :)
    April 4, 2014, 5:24 pm
    @camazar is a 3D printing service so everything they make and sell on this website is produced by the latest and different types of 3D printing techniques, also finishing 3D printed parts (like coloring, polishing etc.) is labor intensive. Therefore the product prices are higher than conventional production techniques, like injection molding etc.. Check out there YouTube page to see how 3D printing works
    March 12, 2014, 8:57 am
    Can Some one please justify to myself how this plastic stuff can be sold for $40us.? It really can't be more then $20 I know I would buy lots of upgrades off this site if the Prices were more Realistic.!! Am I out to lunch here.?
    March 12, 2014, 6:19 am
    @frankv3 The gear will fit but is nog yet compatible because the Phantom 2 nees a extra antenna mount and can-bus mount that are not in this upgrade. I'm working on a compatible version for the Phantom 2
    January 19, 2014, 10:18 am
    Will this gear fit into the existing screw holes on a Phantom 2?
    January 18, 2014, 7:23 pm
    @Luhidan777 Check your local DIY store or eBay for 6mm aluminum or carbon tubing. For example here you can find carbon tubing:
    January 6, 2014, 2:23 pm
    @maikelsdesign Where could I find these bars
    January 6, 2014, 2:13 pm
    @Luhidan777 If you mean that the aluminum or carbon tubing is not included than that is correct, those are not included as stated in the description.
    January 6, 2014, 1:05 pm
    I've purchased these pieces, but reached without bars
    January 6, 2014, 12:01 pm
    @mcates Yes the feet are included in the set.
    October 15, 2013, 4:15 pm
    Does this come with the feet? Or do I have to purchase separately? I want to get these ordered asap.. Thanks for all the help.
    October 15, 2013, 3:31 pm


    We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

    Click anywhere outside this window to continue.