DJI Phantom transmitter Throttle Lever

by maikelsdesign
DJI Phantom transmitter Throttle Lever 3d printed Mechanical parts Accessories Throttle lever overview
Throttle lever overview
  • White

    White nylon plastic with a matte finish and slight grainy feel.

Buy Now
DJI Phantom Transmitter Throttle Lever.

DJI Phantom firmware (3.12 or higher) has a new take of feature. This new take of feature is optimized for transmitters with a spring loaded throttle control stick (throttle lever stick jumps to the center when released). The current DJI Phantom transmitter is not equipped with this feature so with this throttle lever upgrade and a spring (not included) you can add this feature to your existing DJI Phantom transmitter.

Why upgrade ?
  • It’s easier to turn your phantom (yaw) without accidentally throttle up or down
  • Just release the throttle stick to level out your phantom
  • Takeoff is much easier (you just give a little bit of throttle)
  • It corresponds to the new takeoff feature of the new Naza-M firmware (3.12)

  • Main product Features:
  • 1 on 1 copy of the control stick lever on the other side of your transmitter
  • Easy installation (see instruction video)
  • Is made of the material Strong and flexible (available in the colors white and black)

  • See also the Throttle Lever+ with integrated spring (so no additional spring is needed).

    • !See video and photos above for an impression and building instructions.
      (See also this video from DJI)
    Package contents includes:
  • 1 - 3D printed throttle lever

  • Not included but required:
    • Spring!!
      (see control stick lever spring on the other side in your transmitter to know what kind of spring you need, usually available at your local RC hobby shop)

    I can not be held responsible for any kind of defects or damage that arise when performing this upgrade

    If you have any comments or questions please leave a comment below.
    And if you like this product please leave a Star-rating (at the top of this page) or a comment (at the bottom of the page).

    Thanks and have Fun flying your Phantom!!


    IN: 1.449 w x 0.525 d x 0.138 h
    CM: 3.68 w x 1.334 d x 0.35 h


    Sign In or Join to comment.
    The difference between the Throttle lever and the Throttle lever+ is that for installing the Throttle lever you need a spring (not included) and is based on the same mechanical system as in the opposite side of your control stick system. The Throttle lever+ doesn’t need a spring because it is already integrated in the design. because of this it’s mechanical system is slightly different than the traditional system but has the same beneficial effect (control stick jumps to center). I have found no advantages and disadvantages between the two version except for the fact that in case you go for the Throttle lever you have to find a proper spring.
    October 8, 2013, 6:31 pm


    We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

    Click anywhere outside this window to continue.