DJI Phantom FO-OSD (Fibre Optic OSD) - d3wey

by d3wey
  • White

    White nylon plastic with a matte finish and slight grainy feel.

Buy Now

This kit makes it possble for you to see the status LED in the goggles or on the monitor of your FPV system. It comprises of two parts

  • (1) GoPro Hero3 Lens Mount
  • (2) Rear frame.

You will then need to buy a very cheap, thin Toshlink fibre optic cable (like a couple of pound/dollars tops on ebay).

The lens mount slips onto the Hero3 lens snuggly (some sanding may help if it feels too tight). The rear mount slips over 2 25mm hex spacers (again an easy ebay purchase). The system is a perfect compliment to the d3wey FPV custom undertray which uses these spaces but can be fitted using spacers or even long M3 screws with large heads.

Once fitted the fibre optic cable can be cut to length and slipped into the lens cover hole and rear mount hole. You slide the cable up to press against the status LED and hence the colour is transmitted to the lens cover via the cable. This is then just inside your field of view on the camera allowing you to see when your green/yellow turns to RED (low batt). This is actually more reliable than many OSD (on screen display) systems as they only tell you voltage whereas the Phantom decides when it will auto land.

- Please note that the suggest fibre optic cable diameter is 2.15mm. The cheapest cable will do for this and thicker cables can be trimmed down easily with a craft knife -

- d3wey -


IN: 4.134 w x 1.023 d x 1.164 h
CM: 10.5 w x 2.598 d x 2.956 h


Sign In or Join to comment.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.