This was a simple earring set I made on commission. I thought it turned out pretty well. They might even turn out better if there were more than one pair printed at a time such that the plastic had more time to cool between layers. But the trihedral bonding looks pretty visually interesting.
Report Thing as Inappropriate
earring, honeycomb, honeycomb_earring, jewelry, trihedral
Honeycomb Earings by Relentless is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
1. Print these with exterior support vertically. Unless you increase the size of these, you have to print the honeycomb vertically to get it to print that thin. I tried it horizontally but the tool path always left gaps in the honeycomb.
2. Carefully remove the support and clean the edges with a knife or Dremel tool.
3. Install an earring hook on each one.
4. Install a plastic retainer tube on the back of each hook to prevent them from being lost when worn. Honeycomb Earings
is licensed under the Creative Commons - Attribution - Share Alike