Alexmos Brushless Gimbal Controller Board Box with

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics text repaired 9-30-2013
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics text repaired 9-30-2013
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Access to pins is designed in.
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Access to pins is designed in.
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Sensitive components are protected against shorting out.
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Sensitive components are protected against shorting out.
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics This product also includes the cover that acts as the hold down for the board into the housing.
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics This product also includes the cover that acts as the hold down for the board into the housing.
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Blue Strong & Flexible Polished
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Blue Strong & Flexible Polished
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics White Strong & Flexible Polished
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics White Strong & Flexible Polished
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Purple Strong & Flexible Polished
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Purple Strong & Flexible Polished
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Red Strong & Flexible Polished
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Red Strong & Flexible Polished
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Pink Strong & Flexible Polished
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Pink Strong & Flexible Polished
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Black Strong & Flexible
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics Black Strong & Flexible
Digital Preview

Not a Photo

Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics
Alexmos Brushless Gimbal Controller Board Box with 3d printed Accessories Robotics
Digital Preview

Not a Photo

3d Model Viewer

About this Product

This box is designed to house Version 1 of the Alexmos brushless gimbal controller board and allow access to all pins. Incorporated into the design is mounting with reinforcement to allow through bolting to the roll motor with a standard 16 x 19 mm pattern. Slots are provided that allows indexing at 90 degree intervals. Also included is the cover that is secured by 3mm machine screws (nylon recommended). This holds the board in place while protecting the back side. M3 x .05 tap required to put machine screw threads into box. Only compatible with boards that are identical to or available here http://flyduino.net/Alex-Mos-Brushless-Gimbal-BLG_1 or here https://viacopter.eu/multirotor-shop/camera-gimbals/alexmos-gimbal-controller-and-imu-multicopter-store .----------------- New version uploaded 18-SEP-2013 has blind fastener holes now changed to through holes for ease of tapping. Also text labeling has been added for pinouts of roll and pitch motors as well as external controls of roll and pitch.

Dimensions

IN: 1.087 w x 2.076 d x 2.214 h
CM: 2.76 w x 5.274 d x 5.624 h
Sign In or Join to comment.
 
@dz1sfb ok, good to know. I'll probably order that in the near future.
February 16, 2014, 9:18 pm
@powerjosl I see what has happened. That page now has the Version 2 Alexmos Controller Board. I have just within the past few weeks released a housing for V2. It is here https://www.shapeways.com/model/1665281/alexmos-v2-3-axis-brushless-camera-gimbal-controll.html?li=user-profile&materialId=6
February 16, 2014, 9:13 pm
@dz1sfb I think something must have changed with the controllers in the meantime. the second controller that I ordered is exactly the same as the one you linked to in your first link from flyduino. if you compare both links you can see that only the second link has the same layout as your 3d print. maybe remove that first link just to be sure.
February 16, 2014, 4:15 pm
@powerjosl - I am sorry that you made a purchase that did not work for you. I have taken time to specify what boards this product fits. Specifically have a URL in the description. You are right, there are too many boards to make a product for each one. That is why I have chosen to only support those boards coming from Flyduino and Viacopter. Best wishes, Ken :)
February 16, 2014, 4:07 pm
I have two different alexmos controller and none fit into the 3d print I got from here. One is to big for the big, the other one fits, but none of the holes line up with the connectors of the board. I think there are so many different alexmos boards out there, it's almost impossible to make a 3d print that works with all of them.
February 15, 2014, 12:41 am
http://www.youtube.com/watch?v=tdCPu6H7w0A
October 16, 2013, 9:31 pm
The closest at this time is this product https://www.shapeways.com/model/1326147/alexmos-controller-board-housing-without-cover.html?li=my-models&materialId=6 with this product https://www.shapeways.com/model/1324650/alexmos-third-axis-controller-housing.html?li=my-models&materialId=6
October 2, 2013, 1:43 am
Any boxes that house both boards? The 2 axis + 3 axis?
October 1, 2013, 11:28 pm
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.