GoPro Helmet Mount.

Simensays GoPro Helmet Mount

For a snug, low profile, secure, direct fit to any helmet, and all generation GoPro Cameras

I got tired of mounting my GoPro cameras to my skydive helmet, using all the stock mounts. They did not really fit all theta good, other than on the top of my helmet, sticking up like an antenna. Also, all those clips and base plates making up the mount, overcomplicates a simple challenge, and build in both size/height and weight.

I wanted the camera on the front of my helmet, and although GoPro have made a front helmet mount lately, it is still the clip & base plate design. After testing various alu mounts I've found online, they all had a limited range for aiming the camera, so I designed my own that actually works. You get a quick glimse of how I have it mounted on the front of my helmet in the video, not on top like the two buddies. They have both received a front mount each now.

The mount is screwed into the helmet, and can be mounted on any curved surface with a similar radius. I use in on the front of my skydive & BASE helmet, and plan to mount one on the back also, when I get my 2nd GoPro H3 soon.

M3 self tapping screws should be used. Not included.


IN: 1.575 w x 0.787 d x 1.072 h
CM: 4 w x 2 d x 2.722 h


Sign In or Join to comment.
@simensays Thanks for the info. Is it possible to have another version of this mount with 49.5mm from center to center of the mounting holes?
April 1, 2014, 5:04 pm
@marimach77 The distance is 26mm from center to center of the mounting holes.
April 1, 2014, 2:57 pm
What's the diameter between mounting wholes?
April 1, 2014, 9:40 am


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.