Get the best of 3D Printing in your inbox, plus exclusive offers and recommendations from the Shapeways team.
This is the 'stubby' version of the full size d3wey Custom FPV Undertray. It is a shorter design without the integrated TX holder. It is designed for people who want the option of either no TX holder or the option to add/remove it when they want. For this reason the 'standalone' version of the d3wey TX holder fits perfectly to it secured via velcro straps.
The 'stubby' is designed to be able to mount the TX holder and the Filter housing together but you will NOT be able to mount the d3wey Battery Cage at the same time (you will be able to mount it seperatley but not all of them together).
The tray is fitted to the Phantom via "4 x M3 25mm Brass Hex Spacers" (not included). They can be sourced from Ebay for about £2 - £3.
The spacers replace the inner screw on each of the Phantom's landing legs. The tray then sits on the spacers and the original M3 leg screws are used to attach the tray to the spacers.
*** - Please Note - *** As with any Shapeways product please be aware of what you are buying. This is a custom designed part not mass produced. It has a slighty rough finish (but nothing that will scratch items). I make every effort to test all my designs but I regret manufacturers do change their products from time to time. If in doubt please contact me.
- d3wey -