Sci-Fi Roman shields (10 whole sprues) (Scutum) with posable shield arms. Suited for 28mm Sci-Fi miniatures. The arms have ball joints in the wrist and the shoulder (should be glued into their final position), and the elbow allows the arm to be glued in many different postures. The upper arm and the forarm have 0,4 mm holes for inserting pins. A triangle on the elbow-joint indicates which side the forearm should be attached to. Everything should be glued into it's final position, and the elbow-joint should be sculpted over. The surface might be a bit rough, so a light sanding with very fine sandpaper will smooth it out. I would really recommend Frosted Ultra Detail for the material, but I tried to avoid having any detail smaller than 0.2mm, so Frosted Detail might also work if you want it a bit cheaper (I have not tried it myself). Please contact me if you want some other amounts (10 is the limit per print though) or some other additions (different decor etc!).