BIG Battery Door Upgrade

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door overview
BIG Battery door overview
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door overview
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door overview
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door front view
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door front view
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door section view
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door section view
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door side view
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door side view
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door overview
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door overview
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door rear view
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY BIG Battery door rear view
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Blue Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Blue Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Green Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Green Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Pink Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Pink Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY White Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY White Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Orange Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Orange Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Black Strong & Flexible
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Black Strong & Flexible
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Purple Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Purple Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Red Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Red Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Yellow Strong & Flexible Polished
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY Yellow Strong & Flexible Polished
Digital Preview

Not a Photo

BIG Battery Door Upgrade 3d printed Accessories Maker/DIY
BIG Battery Door Upgrade 3d printed Accessories Maker/DIY
Digital Preview

Not a Photo

3d Model Viewer

About this Product

DJI Phantom BIG Battery door Upgrade.

Do your 3rd parties batteries just fit in the phantom? With this battery door Upgrade-kit you can replace you existing battery door with a larger one so that your 3rd party battery and cables fit easily into your Phantom without any hassle.

See also the slim (medium large) version battery door.

Main product Features:
  • Even more battery and wire space in you Phantom
  • Easy Installation
  • Is made of the material Strong and Flexible (available in six colors)

    • !See video and photos above for an impression and installing instructions.
      (Video is in German but is self explaining and provided by Arthur's Channel)

    Package contents includes:
  • 1 - 8 gram 3D printed battery door (In the color you ordered)

  • Not included but required:
  • There are no additional components required

  • Additional comments:
    • I recommend that you first check if you can manage to remove the stock Phantom battery door before you purchase this upgrade (see comments below for possible removal instructions).
    • If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).

    When flying in single battery setup always check if your battery door is properly closed before take off. I can not be held responsible for any kind of damage that arise when using this battery door upgrade.


    If you have any comments, feedback or questions please contact me or leave a comment below.
    And if you like this product please like this page or leave a comment below.

    Thanks and have Fun flying your Phantom!!

    Dimensions

    IN: 1.862 w x 1.524 d x 1.806 h
    CM: 4.73 w x 3.87 d x 4.586 h
    Sign In or Join to comment.
     
    disappointed! Really can't recommend this battery door. The material is simply too soft and I don't expect it to last very long. The material of the original door is way more solid.
    June 20, 2014, 9:25 am
    I see what they did here. I got shipped another product you created. A slotted door for batt cables. I've contacted Shapeways to get it all sorted out. The door looks and feels great! And I bought my Phantom in November and the pin was easy to get out. I must admit I watched the video on how it's done several times and started off with the proper tools.
    January 28, 2014, 2:18 am
    Sorry to repost but here is a pic of what was sent:
    January 28, 2014, 12:36 am
    Just got this door in coral red but it has two large notches along each side, where the door meets the phantom. This is not what is pictured and I am worried about dirt, water, debris entering the craft. I'd really like the door as it is pictured and not with these four large notches.
    January 28, 2014, 12:27 am
    @lukamargo See this Painting 3D printed SLS models tutorial from Shapeways tutorial section http://www.shapeways.com/tutorials/painting3dprintedsls
    December 20, 2013, 11:41 am
    In case I can paint it wich materials i can use, base water, solvents....?
    December 20, 2013, 11:38 am
    hi I recieve the piece but need to know how can i protect the surface, can I paint it?
    December 20, 2013, 11:37 am
    Comparto otra foto
    October 16, 2013, 12:50 am
    Spanish people buy things here to !. Excelente upgrade para el phantom, parece ser mas liviana que la original y te da mas espacio para los cables y poder usar una bateria un poquito mas grande con capacidad. Un upgrade super necesario. Saludos desde Uruguay !
    October 16, 2013, 12:48 am
    It was easier to install than I originally thought reading some posts about remiving the old battery door. Definitely an improvement compared to the old version. I can recommend the battery upgrade. One potential improvement: I use a buzzer for voltage warning which is attached outside on the battery door. It would be cool to have a version where both on the left and right side there is open space left for getting the resp. cables out from the inside the copter.
    September 9, 2013, 4:36 pm
    Das Batteriefach upgrade passt super zum neuen Design meines DJI Phantom.
    August 30, 2013, 12:23 pm
    @ericdamwhite The main purpose of this product is to give you more cable space with the stock phantom or 3rd party batteries. The stock Phantom battery door is 6mm deep, the BIG battery door is 18mm deep so it is possible to fly with a battery that is +/- 10/12 mm longer depending on how much cable the battery has (this is at your own risk). The upgrade does not make the battery opening wider or higher so keep that in mind.
    June 5, 2013, 8:34 pm
    How large of a battery can I use with this BIG Battery Door .
    June 5, 2013, 8:15 pm
    @goldfinger666 The following two methods for removing the battery door pin worked very well for me. Method 1: Take a pushpin with a flat head and cut of the sharp point and than push out the pin with this pushpin. Then on the other side the pin protrudes so you can then pull it out with a pair of pliers. Method 2 (you need a extra pair of hands for this one): Take a long enough thin nail en remove the sharp point. Let someone hold the phantom on it's side and place the edge of the hinge on a table in such a way that the pin is free to come out. Then use the nail and a (small) hammer to gently tap the pin out (make sure you do not damage the hinge on the table). Again you can use a pair of pliers to pull the pin further out.
    June 3, 2013, 8:14 pm
    How do I remove yhe old battery door
    June 3, 2013, 8:02 pm
     
    Logo

    Hello.

    We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

    Click anywhere outside this window to continue.