Osiris (Modern) Toy Kit

Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
See Assembly Video
Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Digital Preview

Not a Photo

Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Digital Preview

Not a Photo

Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Digital Preview

Not a Photo

Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Osiris (Modern) Toy Kit 3d printed Maker/DIY See Assembly Video
Digital Preview

Not a Photo

Osiris (Modern) Toy Kit 3d printed Maker/DIY
Osiris (Modern) Toy Kit 3d printed Maker/DIY
Digital Preview

Not a Photo

3d Model Viewer

About this Product

Product Video
Assembly Video
Exactly the same design, assembly, and operation as my Connor Kit with a modern aesthetic.

NOTE: This is a kit to build a toy. This kit is designed specifically as a con-safe cosplay prop. The end of the prop is squared-off and blunt and is therefore in no way intended to create a potentially dangerous weapon. Any modification to the design as sold is outside the recommendation and responsibility of the creator and manufacturer of this kit.

Prop is 7.75" in length closed and 19" extended.

Dimensions

IN: 7.736 w x 4.646 d x 0.6 h
CM: 19.65 w x 11.8 d x 1.524 h
Sign In or Join to comment.
 
How do I order to the uk
7 hours ago
@Ammnra Ok, I now understand why you have the price you have and I'm not against it, but I am a huge assassin's creed fan, and I'm that kind of person that want something and byes it even if it's a little bit expensive fore me. But I am only 15 and don't have acces to more money so I was trying to deal and offer you a price that's a little bit over my max prise but so close to your price as possible. And my other problem is that my parents don't let me bye your awesome blade for €125.93. But if you could sell it to me for €110.90 I would be more than happie to bye it. But I understand if you don't want to but I would love to bye one if you could sell it to me fore €110.90!
August 11, 2014, 11:30 pm
@Ponolden Simple, unfinished prop kits or garage kits tend to run in the $100-$300 range. Check out the prop kits from other crafters like Volpin Props, MrPinski Props, Sorenzo Props, Punished Props, etc and you will see my prices quite reasonable. However, the high degree of difficulty of my multi-part, functional props means I spend more time and money in development when compared to other solid cast props. Also, quality 3D printing requires very expensive machines and unique (and expensive) materials. I understand that my creations may be outside the limit of some folk’s discretionary income but that does not mean they are universally “too expensive” or “overpriced.” Just to be clear, comments like "your prices are too high" or rhetorical questions like "why is it so expensive?" are not incontestable facts but actually slightly insulting personal opinions. When I see something I want but the price is higher than I can afford, I don't buy. Perhaps I'll patiently watch it in case the price drops later or save to hopefully afford it later. I do not recommend contacting the creator and insulting them by declaring they are misguided for thinking people will pay a price the creator thinks is fair.
August 8, 2014, 9:17 pm
I could bye it for 110,90 but not higher, i mean it's not from the game it's your own design so it's a little bit expensive...
August 8, 2014, 9:15 pm
Why the price increase?
August 7, 2014, 12:42 am
What does the shipping costs?
May 5, 2014, 3:15 pm
Thanks @Ammnra I checked it thanks for the link
March 23, 2014, 10:41 am
@SkySly Yes. Check out: Etsy: Fully Finished Props/Jewelry http://www.etsy.com/shop/AmmnraCreations
March 23, 2014, 7:13 am
Ammnra is there a way that is more expensive but you make the product if not its ok
March 22, 2014, 11:14 am
@Ammnra Thank you for the clarification. :-)
March 21, 2014, 12:36 pm
@Dark_Magnus SLS Nylon is not soft/wobbly.
March 21, 2014, 8:16 am
I was just curious( and maybe it was just my eyes playing with me) but is the "blade" section seem kinda soft/ wobbly?? Is so, can it be replaced with harder/firmer plastic (simply to preserve the illusion at cons)?
March 21, 2014, 1:29 am
Any chance you could make some sort of a shell for these Connor-inspired hidden blades? With the Romano kits, I can wear a vambrace over them because the straps can be tightened over the hidden blade. With these, I can't do that because it would restrict the blade from sliding out. I'd really like to be able to use a Connor-styled hidden blade with it underneath my vambrace or sleeve.
February 27, 2014, 4:25 am
@Ammnra Thank you! I hope I'll get some money together soon so i can purchase your awesome items
January 5, 2014, 11:25 pm
@RenoWoods Yes, the moshi moshi upgrade is compatible with this kit.
January 5, 2014, 11:23 pm
@Ammnra is the moshi moshi upgrade compatible with this kit? Thanks in advance
January 5, 2014, 10:48 pm
Hey Ammnra how many blades does the kit come with???
December 19, 2013, 12:00 am
Any chance the price will come down? This is soo cool
October 19, 2013, 3:53 am
Thanks for helping!
October 17, 2013, 2:16 am
@RoofHopper Yes, all the holes are in the same locations, however, there is one additional hole. It is the hole for the pin that goes through the blade. It is between the two holes for the conner style blade.
October 16, 2013, 8:41 am
@Ammnra is drilling the holes is the same spots as Connor's kit?
October 16, 2013, 3:03 am
@Ammnra and how long is the shipping to Philadelphia?
October 11, 2013, 10:41 pm
@Ammnra What's your symbol called?
October 11, 2013, 10:39 pm
@RoofHopper It's the same as the Connor design
October 11, 2013, 5:50 am
@Ammnra does it comes in like the modern blade from the video or it's like the Connor kit?
October 10, 2013, 2:32 am
@Ammnra please you can make a video on Youtube of the ensambling of the osiris blade please?
October 8, 2013, 2:36 am
@Ammnra where can i find the Velco straps?
September 23, 2013, 1:46 am
How long is the extended blade on the osiris. and how long is the extended blade on the connor kit
September 21, 2013, 4:49 pm
@D_man94 With a process as expensive as 3D printing and the complexity of developing these kits, the prices are set as low as the reasonably can be.
September 21, 2013, 5:14 am
@Ammnra is there anyway this price will drop? Liker Halloween? Cause i really want this my cosplay party im going and im on a very VERY strict budget....
September 21, 2013, 4:27 am
@Andrew397 This would work for a pop-out cosplay dagger. The Anubis Kit I sell would work as a pop-out cosplay sword.
September 21, 2013, 3:39 am
@Ammnra do u think I could use it as a sword or dagger, like pull the string and becomes as long as a sword or just use the knife as the dagger
September 21, 2013, 2:18 am
@D_man94 Amazon.com There are links in the video description.
September 20, 2013, 8:43 am
@Ammnra do ypu still have to get the magnets and elastic bands? And where should i get them.from?
September 19, 2013, 2:51 pm
@Andrew397 I don't know. It is 7.7in long when closed.
September 15, 2013, 4:04 am
@Ammnra thanks And do u think it fits me I'm 10
September 15, 2013, 3:57 am
September 15, 2013, 1:48 am
@Ammnra Is it built exactly like the conor hidden blade
September 14, 2013, 1:34 pm
Also I'm 10 do u think it fits
September 14, 2013, 2:10 am
It won't let me watch the assembly video
September 14, 2013, 1:49 am
How do u build it?!
September 14, 2013, 1:46 am
@Ammnra thanks
September 11, 2013, 11:04 pm
@jmd97 Kits can be ordered year round.
September 11, 2013, 9:42 pm
Could you make some of the parts to this downloadable so that I can have it made of a different material?
September 10, 2013, 8:49 pm
so Christmas is coming up soon, will you still have this product available? or will you be closed for the holidays
September 10, 2013, 10:08 am
@randomcosplayer Foil tape... just like I show in the Connor kit video.
August 28, 2013, 2:03 am
@Ammnra how did you give the handle the "metal" look to it shown in the display?
August 27, 2013, 8:38 pm
@Ammnra thank You :D i was just curiosos because in the video it looked different
August 24, 2013, 4:25 am
@ac3xD It's the the same as the Connor kit.
August 24, 2013, 4:22 am
Quick question i saw a youtube vid on this, modern one but the blade came out slow :/ i just want to make sure it springs out quick, like the other kit you've shown, before i buy this one
August 23, 2013, 7:26 am
How feasible would it be to produce this product out of premium steel rather than plastic? It would result in a sturdier, more durable, and more operational collectable. If you are willing to attempt this, I believe you would gain access to a higher tier market of interested collectors. On a side note, I apologize for the the lack of negotiations Ubisoft has demonstrated concerning this product. The obviously care not for either their fan base, or thoughtfully crafted, fully operational products. Money is proving to be their sole objective.
August 19, 2013, 3:11 pm
@randomcosplayer It's the same paint I used in my Connor assembly video (9:15 Americana Black Acrylic).
August 17, 2013, 6:21 am
@Ammnra hello ammnra, i'm thinking of buying this and I was wondering, what paint did you use for the display picture? i'm doing a cosplay and I want to get the same finishing look at the display
August 17, 2013, 5:54 am
@Arcticblacksmith he's probably not going to sell the daotf because it takes a long time to draw up in a program cause it's more complicated. Also because it's considered a challenge to build your own. Unless your lucky enough to buy one off someone, I don't think ammnra is going to sell daotf.
August 17, 2013, 4:57 am
hello ammnra, i'm thinking of buying this and I was wondering, what paint did you use for the display picture? i'm doing a cosplay and I want to get the same finishing look at the display
August 17, 2013, 4:17 am
@Arcticblacksmith dude, do you know the operation of a daotf switchblade? Have you tried making your own? You learnt how to use sketchup? If not then stop asking for designs. That shit takes ages to learn and design
August 17, 2013, 1:51 am
@Ammnra Your Hidden blades are the greatest... I hope u make more so I can see how awesome they will be ^_^
August 16, 2013, 7:44 am
@Ammnra I agree with u Ammnra
August 16, 2013, 7:41 am
@Ammnra your right
August 15, 2013, 9:10 pm
@Arcticblacksmith Selfish, retarded, self absorbed, touchy, and talented.... such a sweet talker, but your endless flattery will get you nowhere. Much like "why are you so stupid?" a question like "why don't you sell XXXX?" is rhetorical. From my experience, people are not interested in learning/understanding the answer, instead they're more interested in starting and winning an imaginary debate. I would prefer, If anyone feels they have access to new/interesting info that might better inform my choice or opinion, please comment and state their case. However, I personally don't feel the need to justify my position in every description or comment section to better facilitate your rebuttal.
August 15, 2013, 7:39 am
@Arcticblacksmith let's see you make one of these he clearly needs more time to make the designs ammnra just started he's getting propabaly to the other hidden blades but it takes time
August 15, 2013, 4:46 am
Do recommend this one
August 15, 2013, 4:41 am
@Arcticblacksmith I have a laundry list of reasons for the items I choose to sell and those I do not. These reasons are not predicated on possessing an IQ under 70, nor are they due to some ridiculously childish notion of personal "cool hording" or exclusivity. Thankfully, within all of my reasons, there is not a single one which I am innately required to justify upon request, especially to an individual who would aim to insult. However, since It's remotely possible you asked for personal edification and not out of some feeling of entitlement to justification... Summarizing my previous comments on youtube, flickr, DA, and facebook: I feel my gravity designs are the most visually faithful, reliable, comfortable, affordable, accessible and most importantly safe designs I have come up with that maintain the key elements of functionality. I choose to sell what I feel are my best designs... regardless if others might not accept or understand.
August 15, 2013, 3:41 am
How does this work? Is it like the Connor hidden blade?
August 6, 2013, 4:26 am
Dear Ammnra. I have a question. Why do not you release a package of parts for the assembly of Assassin's Creed Hidden Blade (Dual Action) as you have in the video http://www.youtube.com/watch?v=BDRR-b979??. I think many would like to buy, and this type of blade. I would be happy if in the future there will be such detail.
August 5, 2013, 9:56 pm
@BRADQS Yup.
July 29, 2013, 3:58 am
Does this function identically to the Connor Version?
July 29, 2013, 1:29 am
Will this pass the customs if it is shipped to Singapore? Really really considering on buying this.
July 19, 2013, 1:49 pm
@SpaceSpaider http://www.shapeways.com/support/shipping
July 3, 2013, 6:01 pm
Do you ship these to Mexico? If so is it more expensive or does this price have the shipping price included?
July 3, 2013, 2:49 pm
Just ordered mine last night and I'll be climbing the walls until it gets here. Can't thank you enough for making your absurdly awesome prop weapons available to the cosplayer community. I'll definitely be on the look out for your next prop design.
June 12, 2013, 12:14 pm
@kkraywolfe if this was metal, it wouldn't be on Shapeway!
June 1, 2013, 9:56 am
cant wait to receive one :P
June 1, 2013, 9:55 am
i would defiantly be buying this if it was metal
June 1, 2013, 12:25 am
@Ammnra Hi I'm from south Korea and I want to buy your kit! I want to use it when I do a cosplay. But I have a question first-where can I see some videos or explains how to make it?
May 24, 2013, 1:27 pm
@DrifterDesigns It is indeed ambidextrous.
May 20, 2013, 11:45 pm
@Ammnra Is the Osiris ambidextrous? Or is it meant to be worn on a specific arm? Thanks, and keep up the great work!
May 20, 2013, 10:12 am
@Ammnra why are the kits for hidden blades all over $100?
May 17, 2013, 4:04 am
cant wait to get mine next week. love these hidden blades
May 15, 2013, 1:44 am
Thanks got one on the way, had to scrounge some neca ones for Anime North. One is having spring issues, lol joy! Love your work man, keep it up!
May 14, 2013, 10:08 pm
@Ammnra Alright cool! I bought one! Once again thanks for your creation
May 14, 2013, 12:50 am
May 13, 2013, 6:42 am
@Ammnra I just bought one! Thanks for your creation and hard work! Also will the Moshi Moshi Upgrade work with this modern blade?
May 13, 2013, 5:09 am
@Ammnra ^_^ thanks for all your hard work
May 11, 2013, 10:11 am
@Ammnra thanks thats really helpful
May 11, 2013, 12:04 am
@Ammnra sweet ill start work on that piece this weekend
May 10, 2013, 4:51 pm
@McLitebulb It's the the same as the Connor kit.
May 10, 2013, 4:20 pm
@GL2814 It's the same size as the Connor base minus the "Wheel" on the back.
May 10, 2013, 4:19 pm
@Natas_Lived My "A" is on one side and my eye symbol is on the other.
May 10, 2013, 4:18 pm
Quick question: is the base piece the same length as Connor base??? Just wonderin cause I was gonna wait til I get it before mockin up an arm piece I have in mind bit if it is then ill just use the Connor one to mock it up so I have it ready ready when I get it
May 10, 2013, 1:38 pm
just a quick question, which emblem will be on it just to verify is it your insignia or the anubis A the 3d image has your insignia and the finished photo has the other
May 10, 2013, 10:03 am
sweet, you good sir just made my cosplay much easier i just wanted to say thank you
May 10, 2013, 9:58 am
ammra sorry to bug you again but could you make a youtube video on how to put this one together
May 10, 2013, 3:06 am
I saw on face book you take suggestions and I know you were taking a break from hidden blades but if you make more of them you should make a straight gravity hidden blade.
May 9, 2013, 11:00 pm
I think Im gonna paint the blade black like some of the modern blades today and is you research, the modern hidden blades had a black colored steel blade.
May 7, 2013, 11:16 pm
 
  • White Strong & Flexible

    White nylon plastic with a matte finish and slight grainy feel.

    $135.00
Buy Now
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.