Moustache Coat Hanger

Moustache Coat Hanger 3d printed For Your Home Memes Moustache Coat Hanger
Moustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes Mustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes Mustache Coat Hanger
Mustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes Mustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes Mustache Coat Hanger
Mustache Coat Hanger
3d Model Viewer
Moustache Coat Hanger 3d printed For Your Home Memes
Moustache Coat Hanger 3d printed For Your Home Memes
Moustache Coat Hanger 3d printed For Your Home Memes Moustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes Moustache Coat Hanger
Moustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes Moustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes Moustache Coat Hanger
Moustache Coat Hanger
Moustache Coat Hanger 3d printed For Your Home Memes screws: M4x14.0mm
Moustache Coat Hanger 3d printed For Your Home Memes screws: M4x14.0mm
screws: M4x14.0mm
This great home accessory draws the domestic atmosphere right in le mustache zone. Hang your coat on it, or whatever your heart may desire.

Installation is easy: screw two screws aligned on the horizon and just pop Moustache Coat Hanger on it! Two M4x14mm screws with a round head are recommended.

Moustache Coat Hanger consists of one solid piece, and is specifically not hollow to achieve maximum strength. This piece may also be used as an cabinet handle or knob.

Anyone unable to find appropriate screws to mount this piece may contact me with their address and i will send them screws to mount it in wood.


Requirements


-a screwdriver
-two M4x14mm button/dome head screws
advised screw dimensions:
thread size: 4.0mm
head diameter: 7.8mm
head height: 3.0mm

These dimensions are of the screws shown in the last photo. Advised (minimum) screw length for application on wood: 14mm.

M4x14mm screws with a round head are recommended. However, many other types of screws including flat heads and sunk heads work.


Installation


One for one, push both screws into the Moustache. Use the flat end of a screwdriver to tuck the screws in all the way down. Make sure they fit snugly and are aligned. Now press the screws onto your plank/wall for screw markings. Remove both screws and screw them in the markings. Screws should protrude 5mm, and be 28.1mm apart. Now you can pop Moustache Coat Hanger on it.

Recommended to be used with coat hangers or the loop attached to the collar of the particular garment.

Want to get the 'stache set?

+ +




cm: 8.112 w x 2.012 d x 2.02 h
in: 3.194 w x 0.792 d x 0.795 h

Comments

 
@ElisaRichardson Thank you :) It feels hefty and in use appears quite sturdy. A pair of coat hangers can be hung behind the moustache, and on both moustache ends, preferably over the full width. With proper screws and correctly mounted this piece can handle some load. Would recommend to use cloth hangers or at least a collar loop with it. The extremity of the moustache has edges which may not be gentle to delicate jacket lining. If the outer edges are stressed with enough force they might snap. However haven't accomplished that yet, and wouldn't expect that in normal use. Shot some pictures showing the recommended use of the moustache }:
May 30, 2013, 2:38 am
Love this design! Is it sturdy?
May 29, 2013, 9:03 pm
 
  • White Strong & Flexible Polished

    White nylon plastic polished to reveal a smooth matte finish.

    $21.10

Favorited by