Discover » Downloadable
by
TerraCotta
If M.C. Escher had owned fidget toys, he would have worn "One ring to rule the ball" as a pendant. A single, continuous line contains a small ball that makes orbit after mesmerizing orbit but cannot escape, always held down in four directions. Available in solid, durable stainless steel with optional antique bronze and gold plated finishes to fit any context, "One ring to rule the ball" now also includes a free rubber necklace so that you can confuse your mind any time the fancy strikes you! One customer echoes many others in saying, "I couldn't put it down. This thing is just too fun!"
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
by
CW&T
Pen not included. This sleeve is for Kickstarter backers of the Pen Type-A campaign. If you bought a USA made version of the pen at shop.cwandt.com, it'll fit, but it will not be a snug fit.
These sleeves sometimes comes with some extra powder in it, please make sure you get it all out. Video of powder removal -> https://vimeo.com/47323037
by
studioneat
This is a simple 3D part that, when combined with these magnets (http://www.kjmagnetics.com/proddetail.asp?prod=D201-N52) will allow you do use a Smart Cover with the original iPad 1.
A detailed how-to can be found on www.therussiansusedapencil.com, and a video can be viewed here: http://vimeo.com/22568730
A detailed how-to can be found on www.therussiansusedapencil.com, and a video can be viewed here: http://vimeo.com/22568730
by
improbablecog
Resembling a bat or dragon, these biotech earrings are the wings of an alien exoform.
This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick
Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:
- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com
Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)
That's it, otherwise have fun!
This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick
Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:
- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com
Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)
That's it, otherwise have fun!
by
Chaffmar
A custom designed electric guitar perfect for Lego minifigs. (Does not actually make sound)
Recommended Materials:
White Detail OR
Strong and Flexible
Recommended Materials:
White Detail OR
Strong and Flexible
by
bitstoatoms
Replacement part for inside hub of Bugaboo Chameleon Stroller.
3D print in stainless steel for maximum strength. You will most likely need 2 for each side of the each side of the stroller that is broken.
Check out Instructables for a step by guide how to repair your Bugaboo with Shapeways 3D printing.
This is not an official Bugaboo part, nor has it been endorsed by Bugaboo in any way.
There are no waranties of how this it wlll work it is simly a solution that worked really well for me that I wanted to share.
3D print in stainless steel for maximum strength. You will most likely need 2 for each side of the each side of the stroller that is broken.
Check out Instructables for a step by guide how to repair your Bugaboo with Shapeways 3D printing.
This is not an official Bugaboo part, nor has it been endorsed by Bugaboo in any way.
There are no waranties of how this it wlll work it is simly a solution that worked really well for me that I wanted to share.
by
Mr_props
a fully articulated mini figure that can twist torso and bend knees. Made to be compatible with most brick brands. Please be gentle when connecting parts together especially the knees. If you order it with a coloured material, you may have to remove some of the polyamide powder that will be stuck inside the knees' joints (you can remove it using a toothpick).
by
improbablecog
10gThough these earrings may resemble an xenomorphic sea creature, we can neither confirm nor deny that they were modeled after any organism living, dead, or bearing any blood relation to our board of directors.
These earrings are sized for 18 gauge piercings and should fit most people with pierced ears. If you need a different size, just ask! I have a few larger gauges already available in the shop, and can resize it to a custom gauge if it's not already there.
Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
by
Bathsheba
You may have seen this model before, it's a free download at bathsheba.com.
Here it is straight from the artist.
Here it is straight from the artist.
by
onetruecathal
Update: Dremelfuge is now provisionally available in the "Strong and Flexible" material, after some basic testing. No guarantee of safety is given, as always. The "Strong & Flexible" material Dremelfuge creates more vibration in use, which may indicate less stability than the "Grey Robust" (ABS) material.
Caveat Emptor: As always, Dremelfuge is sold as an ornament, and any use as a tool is a risk entirely taken by the purchaser/user. I accept no responsibility for the safety of Dremelfuge.
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
by
Mr_props
a small ball and socket character to play with and customize. Can be used with most famous bricks. Please be gentle when assembling the parts. Any comments are welcome :)
by
TrisQ
This WireClamp is designed to clamp 0.8mm diameter wire onto 1/4in (6.4mm) diameter graphite rods. While a previous version was tested, this improved version hasn't been tested yet, so use at your own consideration.
by
Martynas
Rat earrings.
Tested in stainless steel. The earrings are heavy and the hook is thick, but they are suitable for wearing and are easier to put on than their strong and flexible material version. The hooks on the ones in the photos are slightly polished so they are a bit different from what comes straight from Shapeways.
Please feel free to download and use this model any way you wish.
Tested in stainless steel. The earrings are heavy and the hook is thick, but they are suitable for wearing and are easier to put on than their strong and flexible material version. The hooks on the ones in the photos are slightly polished so they are a bit different from what comes straight from Shapeways.
Please feel free to download and use this model any way you wish.
To the extent possible under law,
Martynas
has waived all copyright and related or neighboring rights to
Rat Earings.
by
improbablecog
by
ronen
The intrauterine device (IUD) is the world's most widely used method of reversible birth control for women. But as their production and common materials cost only a few cents, they are sold for a staggering 400$- 850$. Unreachable for many women, especially young ones.
The Bearina IUD is a political product. It demonstrates the disruptive potential of 3D printed Open Designs to give free and global access to essential products, and circumvent industries (such as the Pharma industry) that aggressively defend their intellectual property to control the price and availability of their products. As an Open Design, the Bearina IUD promotes collaborative development and free sharing of knowledge. Further developed by a networked community or in partnership with a forward looking pharma company, It is always available for experimenting with and improving, and could evolve into a functional IUD.
The Bearina, with its bear head image, is visually friendly, to appeal, so to speak, to younger women. It is a conceptual product, a design fiction, and absolutely should not be used as an IUD. Nevertheless, it is designed according to dimensions, materials and shapes commonly found in IUDs.
You are welcome to download the production file of the Bearina IUD (.stl- Creative commons nc-at-sa 3.0 lisence) from my website (www.ronen-kadushin.com). It is free and ready for 3D printing. But if you prefer, you can also download it, or even order some Bearinas from Shapeways.com. They are only 1.25€ each.
In copper- containing IUDs, metal ions dissolving from the device create a spermicidal action. To do precisely that, a 1€ cent coin (copper covered steel) easily snaps in the plastic 3D printed part. An additional piece of nylon string is tied to the bottom part to complete the assembly of the Bearina IUD.
Sources and further reading:
http://www.wired.com/magazine/2011/07/ff_iud/?pid=6100&viewall=true
http://www.dr-miller.com/IUDe.html
http://iud-divas.livejournal.com/
http://www.fleur-de-coin.com/eurocoins/coins.asp
Disclaimer
The Bearina is a conceptual research object, and absolutely should not be used as an IUD or for any internal use.
You expressly agree to hold the designer, Ronen Kadushin, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or designs provided, specifically the Bearina IUD concept design.
The use of Open Design designs should be based on your own due diligence and you agree that Ronen Kadushin is not liable for any success or failure of your actions you take to modify, produce, assemble or repair your products.
The user further agrees that use of this design and all products or content contained herein are at your own risk and there is no warranty expressly made herein.
The Bearina IUD is a political product. It demonstrates the disruptive potential of 3D printed Open Designs to give free and global access to essential products, and circumvent industries (such as the Pharma industry) that aggressively defend their intellectual property to control the price and availability of their products. As an Open Design, the Bearina IUD promotes collaborative development and free sharing of knowledge. Further developed by a networked community or in partnership with a forward looking pharma company, It is always available for experimenting with and improving, and could evolve into a functional IUD.
The Bearina, with its bear head image, is visually friendly, to appeal, so to speak, to younger women. It is a conceptual product, a design fiction, and absolutely should not be used as an IUD. Nevertheless, it is designed according to dimensions, materials and shapes commonly found in IUDs.
You are welcome to download the production file of the Bearina IUD (.stl- Creative commons nc-at-sa 3.0 lisence) from my website (www.ronen-kadushin.com). It is free and ready for 3D printing. But if you prefer, you can also download it, or even order some Bearinas from Shapeways.com. They are only 1.25€ each.
In copper- containing IUDs, metal ions dissolving from the device create a spermicidal action. To do precisely that, a 1€ cent coin (copper covered steel) easily snaps in the plastic 3D printed part. An additional piece of nylon string is tied to the bottom part to complete the assembly of the Bearina IUD.
Sources and further reading:
http://www.wired.com/magazine/2011/07/ff_iud/?pid=6100&viewall=true
http://www.dr-miller.com/IUDe.html
http://iud-divas.livejournal.com/
http://www.fleur-de-coin.com/eurocoins/coins.asp
Disclaimer
The Bearina is a conceptual research object, and absolutely should not be used as an IUD or for any internal use.
You expressly agree to hold the designer, Ronen Kadushin, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or designs provided, specifically the Bearina IUD concept design.
The use of Open Design designs should be based on your own due diligence and you agree that Ronen Kadushin is not liable for any success or failure of your actions you take to modify, produce, assemble or repair your products.
The user further agrees that use of this design and all products or content contained herein are at your own risk and there is no warranty expressly made herein.
by
trompevenlo
More information and ordering at:
www.trompe.nl
The Scrappies - A series of originally designed small sculptures in scrap metal-look.
The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.
The figurines are worked out in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.
Height (with stand): 18 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from a gypsum-based, full-colored composite.
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
by
Ki_Ryn
A rugged transport suitable for a crew of 2 to 6.
This first ship is a test to see if it is feasible to turn my Future Armada line of starships & deckplans Future Armada ships into miniatures. It has a hole in the bottom to fit a standard 1/8th inch stand.
Renderings, deckplans, and interior descriptions of the ship are all available for sale at places like RPGNow. Demo documents and sample art can be found at 0-hr.com.
Note that the model is 5cm long rather than the 4.4 reported by Shapeways. I recommend Black Detail material for this model.
This first ship is a test to see if it is feasible to turn my Future Armada line of starships & deckplans Future Armada ships into miniatures. It has a hole in the bottom to fit a standard 1/8th inch stand.
Renderings, deckplans, and interior descriptions of the ship are all available for sale at places like RPGNow. Demo documents and sample art can be found at 0-hr.com.
Note that the model is 5cm long rather than the 4.4 reported by Shapeways. I recommend Black Detail material for this model.
by
SemajNamssiw
A smaller version of the DNA Earring.
You should receive two earrings if this model is ordered. I have not tested this myself. Let me know if it works correctly! Note that earring hooks ARE included.
You should receive two earrings if this model is ordered. I have not tested this myself. Let me know if it works correctly! Note that earring hooks ARE included.
by
Bathsheba
This is part 1 of a snap-fit puzzle machine. When you turn the knob, it generates fun! This is the deluxe model, there's a smaller version here.
Here's all the parts:
+
+
+
+
+
+
+
+
I designed this for the SME Rapid 2011 trade show. The STL files are available free for use (the show logos have been stripped).
Here's all the parts:
+
+
+
+
+
+
+
+
I designed this for the SME Rapid 2011 trade show. The STL files are available free for use (the show logos have been stripped).
by
trompevenlo
More information and ordering at:
www.trompe.nl
The Scrappies - A series of originally designed small sculptures in scrap metal-look.
The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.
The figurines are worked out in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.
Height (with stand): 16 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from a gypsum-based, full-colored composite.
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
by
Andrewelee
Pen tube that takes a standard Bic Cristal tip.
*** I have only tried the pen in the Strong & Flexible material. Feel free to try other materials, but do so at your own risk. I cannot guarantee they will turn out okay. ***
*** I have only tried the pen in the Strong & Flexible material. Feel free to try other materials, but do so at your own risk. I cannot guarantee they will turn out okay. ***
by
Chris333
Designed by Philip Light. This is a Nn3 V-tipper. Place tipper body on to a MT Z scale truck. Some wall are only .396mm thick and not all materials can support this, it was designed to use Frosted Ultra Detail.
by
Speech500
This is something made for the 'Shapeways Building Contest' to hopefully win an Xbox 360. It took me a day and a half and it's almost perfectly to scale. I tried to replicate the temple as much as possible in minecraft, but made some edits to make it fit more.
by
trompevenlo
More information and ordering at:
www.trompe.nl
The Scrappies - A series of originally designed small sculptures in scrap metal-look.
The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.
The figurines are worked out in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.
Height (with stand): 16 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from a gypsum-based, full-colored composite.
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
by
euphy
This is a pair of sprockets for making a polargraph drawing machine. These are gears designed to drive 12mm pitch beaded cord - like from a roller blind. Have a look at www.polargraph.co.uk for more information.
by
tebee
As the original Chassis this was designed for is no longer available I've modified the design slightly.
It will now fit on a Bandai 4w shorty B chassis 1 - This needs to be shortened to 39.5 mm long by cutting both ends off.
by
swankidelic
Interlocking bricks fashioned after Minecraft blocks. Each face has complementary studs and holes for both vertical and horizontal building. Intended for printing with Full Color Sandstone.
WIP. Still tweaking the textures, and still need to test the interlocking feature.
1) Grass and Dirt block - http://www.minecraftwiki.net/wiki/Grass
2) Dirt block - http://www.minecraftwiki.net/wiki/Dirt
3) Stone block - http://www.minecraftwiki.net/wiki/Stone
4) Wood block - http://www.minecraftwiki.net/wiki/Wood
5) Leaves block - www.minecraftwiki.net/wiki/Leaves
6) Brick block - www.minecraftwiki.net/wiki/Brick
www.minecraftwiki.net/wiki/Brick_%28Block%297) Wooden Plank block - www.minecraftwiki.net/wiki/Wooden_Plank
8) Pumpkin block - www.minecraftwiki.net/wiki/Pumpkin
WIP. Still tweaking the textures, and still need to test the interlocking feature.
1) Grass and Dirt block - http://www.minecraftwiki.net/wiki/Grass
2) Dirt block - http://www.minecraftwiki.net/wiki/Dirt
3) Stone block - http://www.minecraftwiki.net/wiki/Stone
4) Wood block - http://www.minecraftwiki.net/wiki/Wood
5) Leaves block - www.minecraftwiki.net/wiki/Leaves
6) Brick block - www.minecraftwiki.net/wiki/Brick
www.minecraftwiki.net/wiki/Brick_%28Block%297) Wooden Plank block - www.minecraftwiki.net/wiki/Wooden_Plank
8) Pumpkin block - www.minecraftwiki.net/wiki/Pumpkin
