by
fakebusker83
Version 1.5
This is a replacement for the tailfin assembly from FOC deluxe Starscream, featuring 2 movable fins on swivel joints. This allows the fins to be adjusted for different looks in jet mode, as well as fold flat against Starscream's back in bot mode.
This model has been successfully tested in White, Strong and Flexible. With some modification and the use of thin wire, Frosted Ultra Detail and Detail material can also be used.
This is a replacement for the tailfin assembly from FOC deluxe Starscream, featuring 2 movable fins on swivel joints. This allows the fins to be adjusted for different looks in jet mode, as well as fold flat against Starscream's back in bot mode.
This model has been successfully tested in White, Strong and Flexible. With some modification and the use of thin wire, Frosted Ultra Detail and Detail material can also be used.
by
Pitcher
Fracture-6 is a "bandaged" puzzle with three axes of rotation, based on the geometry of the triangular dipyramid. The three axes are located at each four-sided vertex. Every axis is capable of turning in 90 degree increments, but only when all four edges around that axis are pointing in the same direction. If the edges are not properly aligned the axis will be limited to 180 degree turns. This bandaging makes Fracture-6 very difficult to solve.
Fracture-6 comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Fracture-6 also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The ones I used came from this shop. You'll need three screws and three springs.
Have fun!
Fracture-6 comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Fracture-6 also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The ones I used came from this shop. You'll need three screws and three springs.
Have fun!
by
echotransformer
For experienced modders only. DO NOT USE WITH STOCK HERCULES GREY HIPS..please use with stainless hips also for order on this site. Use R/C car gear grease. Design has a no-refund policy/zero margin.
by
Kidmechano
New muscled arm set for your ModiBot figure kits---- Build, create and customize your own Action Bot! ---- Each figure kit is highly-poseable, modular, and upgradeable using a simple snap-fit, ball joint construction!
by
ForceRelics
This is a screen accurate Morpher Coin of the White Power Ranger. It fits perfectly in any vintage morpher and can be printed in plastic or real metal. The one in the picture was printed in gold and it looks FANTASTIC in real life!
A must have for every Power Rangers fan out there!
These do NOT fit the new Legacy morphers, please check my other listings for compatible coins
by
fakebusker83
Version 1.2
A piece to replace the back piece/trunk of the TF: Prime RID deluxe Vehicon figure. This upgrade will give the Vehicon two extra 5mm ports and one 3mm port on his back to mount additional accessories.
In car mode, the ports will resemble aggressive looking rocket boosters!
This model has been successfully tested in White Strong Flexible and Frosted Ultra Detail.
A piece to replace the back piece/trunk of the TF: Prime RID deluxe Vehicon figure. This upgrade will give the Vehicon two extra 5mm ports and one 3mm port on his back to mount additional accessories.
In car mode, the ports will resemble aggressive looking rocket boosters!
This model has been successfully tested in White Strong Flexible and Frosted Ultra Detail.
by
writerwolf
New chest plate, neck and head for the Transformers Prime Ratchet deluxe figure. Using these new parts you can change your Ratchet figure into a very attractive "Classics" style First Aid figure.
KNOWN ISSUES:
I'm proud of my work, and you can see in the pictures that the parts work, but I want to make sure everyone has fair expectations:
1. I have not yet had a chance to test the parts using Shapeways, the parts shown were created using my own 3D Printer. If you get a print, please let me know what material you chose and how they turned out.
2. The fit in vehicle mode is very tight, if maintaining a perfect transformation is critical to you, you may find the parts slightly disappointing, my focus was on making the robot form look great!
3. The automatic pop-up neck feature doesn't work very reliably with my new neck design. Frankly, the original didn't work very well either, and mine is easier to get to pop-up manually.
4. Screw-holes may need to drilled out to correctly re-assemble the figure.
5. Disassembly and painting are required.
by
echotransformer
This is an upgrade kit that makes G1 Predaking taller. It adds thigh extensions and a waist extension for Razorclaw. The waist extension requires disassembly of the figure. There are also arm extensions for Razorclaw to improve his proportions. This is the second version of the parts and are considered BETA. Please order at your own risk. Assemble parts carefully, do not force and sand where needed. Feedback most welcome.
by
Kidmechano
Longsword accessory for ModiBot figure kits -- Build and customize your own Action Bot! -- Modular, upgradeable, figure kit- highly poseable, snap-fit, ball joint construction!
by
tesserato
Joints are somewhat tricky, so expect some sanding before assembling the model (and maybe some gluing ?). I'm working on V2, with better joints (and shipping with some spare joints too, just in case).Comments, suggestions and stuff, drop a line at tesserato@hotmail.com
by
fakebusker83
Version 2.0
This is a set of 6 spider legs for the Beast Hunters cyberverse Airachnid figure! The legs extend out from a central mount that attaches to the 3mm port on her back, and each leg has 4 joints for maximum posability!
Additionally, each leg ends off with a claw that can hold compatible 3mm peg weapons. This set of legs is sturdy enough to support the weight of the cyberverse figure.
This model is successfully tested in Black Strong Flexible and that material is recommended.
This is a set of 6 spider legs for the Beast Hunters cyberverse Airachnid figure! The legs extend out from a central mount that attaches to the 3mm port on her back, and each leg has 4 joints for maximum posability!
Additionally, each leg ends off with a claw that can hold compatible 3mm peg weapons. This set of legs is sturdy enough to support the weight of the cyberverse figure.
This model is successfully tested in Black Strong Flexible and that material is recommended.
by
echotransformer
Here's a kit that allows you to upgrade your Hegemon to have nicely sculpted leg covers. There's no longer a need to paint the clear plastic on the back of his legs black, buy these instead to get a G1 look!
I recommend 'polished white strong and flexible' with some light sanding.
Ensure the parts are well cleaned and free of powder!
Mask the attachment points and spray with fast-drying grey primer.
Next, paint with a semi-gloss black, fast-drying spray paint like Krylon.
Finally, mask the 'ankle cuffs' using painters tape and spray with a medium metallic silver. Finish off the ankle ports with a small black detail on top using either offcuts from labels or a black paint marker.
by
Kidmechano
Shoulder armor attachment for ModiBot figure kits, which let you build and customize your own Action Bot! Each figure kit is highly-poseable, modular, and upgradeable using a simple snap-fit, ball joint construction!
by
wheeljack
Transformers Wrecker Ironfist. For those of you who just want the head. Here it is. Specifically designed to fit the DOTM Deluxe Ratchet figure. I highly recommend getting one of the detail prints.
This one comes with a bullet hole.
by
Kidmechano
Knife and sheath set for ModiBot figure kits, which let you build and customize your own Action Bot! Each figure kit is highly-poseable, modular, and upgradeable using a simple snap-fit, ball joint construction!
by
fakebusker83
Version 1.0
A compact variant of the Quadricore Explodator, the Implodators are most suitable for mounting on vehicular forms and for smaller figures. They make great auxiliary weapons! They are held by the use of a 5mm peg, and each one has a 3mm rail on its side.
This set consists of a mirrored pair of Implodators. Each one is 3 cm long.
This model is tested successfully on White Strong Flexible.
A compact variant of the Quadricore Explodator, the Implodators are most suitable for mounting on vehicular forms and for smaller figures. They make great auxiliary weapons! They are held by the use of a 5mm peg, and each one has a 3mm rail on its side.
This set consists of a mirrored pair of Implodators. Each one is 3 cm long.
This model is tested successfully on White Strong Flexible.
by
TecromDesigns
The Valen designs is an homage to another character that may be used with the following toys: TF Voyager "Cybertron" Vector Prime (pictured), TF Voyager "Galaxy Force" Vector Prime, the TF Voyger "Universe" Vector Prime or the TF Voyager 2007 Botcon Exclusive Alpha Trion. The head if used with said products will remain fully transformable from robot to space ship. The item shown was printed in "Frosted Ultra Detail." The purchase will only include a 3D print of the digital model in the 3d turnaround. There is no glue or screw needed to attach the model to the toy. Please be cautious when attaching the print of the head to the toy as the "Frosted Ultra Detail" material shown has a tight fit on the toy. The toy pictured is not included and is sold separately from the model.
by
snowfox01
Easy-to-finish model ideal for both wargaming and the aircraft collector. Export version of MiG-21SM, known as the Fisbed-J. Fought in Afghanistan, Iran-Iraq, and Gulf Wars.
by
fakebusker83
Version 2.0
"The Pulsar Proliferator fires a burst of 'mini-pulses' at every trigger pull, and each pulse disintegrates on impact to discharge a potent energy packet on the target. Unfortunately, field tests have not proven promising as the pulses dissipate over a short distance, which basically allows longer ranged opponents to dominate the battle field. In closer ranged combat however, the total pulsatory impact is devastating."
The Proliferator is held using a removable 5mm peg handle which can be installed in the stock on under the main chassis for maximum adaptibility with different figures. There is a 3mm clip rail behind the pump handle for additional accessories.
The Profilerator is 7.0 cm in length.
This model has been successfully tested in White Strong Flexible.
"The Pulsar Proliferator fires a burst of 'mini-pulses' at every trigger pull, and each pulse disintegrates on impact to discharge a potent energy packet on the target. Unfortunately, field tests have not proven promising as the pulses dissipate over a short distance, which basically allows longer ranged opponents to dominate the battle field. In closer ranged combat however, the total pulsatory impact is devastating."
The Proliferator is held using a removable 5mm peg handle which can be installed in the stock on under the main chassis for maximum adaptibility with different figures. There is a 3mm clip rail behind the pump handle for additional accessories.
The Profilerator is 7.0 cm in length.
This model has been successfully tested in White Strong Flexible.
by
SteveMarshall
This little puzzle is perfect for your twisty puzzle enthusiast on Valentine's day!
It is designed so that there are no identical pieces, making it easier for a beginner to solve.
It is based on a mini Eastsheen 2x2x2- you will have to glue the pieces you receive onto the 2x2x2.
Please contact me to purchase one pre-assembled.
It is designed so that there are no identical pieces, making it easier for a beginner to solve.
It is based on a mini Eastsheen 2x2x2- you will have to glue the pieces you receive onto the 2x2x2.
Please contact me to purchase one pre-assembled.
by
Kidmechano
Front and rear chest plate for ModiBot figure kits- Build, create and customize your own Action Bot! Each figure kit is highly-poseable, modular, and upgradeable using a simple snap-fit, ball joint construction!
by
Cypherplex
G2P-003: Stronghold Sword
This accessory is an additional item for those of you who managed to snag the TransformersCon exclusive toy for 2011, Stronghold!
In the comic book, Stronghold is depicted with this weapon, and it is also referenced in the character's bio, yet it was not included in the kit.
The sword uses the standard 5mm pegs and will fit snugly in the fist of any toy that has this fist hole size.
There is an additional peg on the back of the sword, meant to attach to the hold on the back of the weapon pod that Headrobots designed, so that Stronghold can carry the sword He-Man style.
Recommended material: Frosted Ultra Detail
This accessory is an additional item for those of you who managed to snag the TransformersCon exclusive toy for 2011, Stronghold!
In the comic book, Stronghold is depicted with this weapon, and it is also referenced in the character's bio, yet it was not included in the kit.
The sword uses the standard 5mm pegs and will fit snugly in the fist of any toy that has this fist hole size.
There is an additional peg on the back of the sword, meant to attach to the hold on the back of the weapon pod that Headrobots designed, so that Stronghold can carry the sword He-Man style.
Recommended material: Frosted Ultra Detail
by
vandal968
This is a custom brick to allow an Arduino UNO to connect to Lego* & compatible bricks. I have only tried this part in the White, Strong Flexible material. It connects securely to both the Arduino UNO and to other Lego bricks while still being removable without undue effort. Other materials may work better or worse, if you try a different material, please let me know how it works out.
by
Kurisama
This is a custom upgrade piece to convert a Yamato 1/60 Queadluun Rau DYRL version into a TV version Q.Rau. Model will require clean-up, sanding and paint complete.
Please note this is ONLY for ONE head unit. The 3 head units in the image are for illustrative purposes only.
Some clipping of materials will be required to separate the ball-joint and visor to then attach to the main unit. Some glue will be required for the visor.
Please note this is ONLY for ONE head unit. The 3 head units in the image are for illustrative purposes only.
Some clipping of materials will be required to separate the ball-joint and visor to then attach to the main unit. Some glue will be required for the visor.
by
fakebusker83
Version 1.0
This is the Dejector, an extremely posable, 2 inch tall robot. It comes with 2 detachable blaster accessories which he can grasp in his hands. He can hold other compatible 3mm peg accessories as well.
By some odd quirk, he can fold up into a rough, disc-like shape...
This model has been successfully tested in Strong Flexible and Frosted Ultra Detail. Due to fragility issues with FUD, Strong Flexible material is recommended.
Radicon thread here.
Flickr gallery here.
This is the Dejector, an extremely posable, 2 inch tall robot. It comes with 2 detachable blaster accessories which he can grasp in his hands. He can hold other compatible 3mm peg accessories as well.
By some odd quirk, he can fold up into a rough, disc-like shape...
This model has been successfully tested in Strong Flexible and Frosted Ultra Detail. Due to fragility issues with FUD, Strong Flexible material is recommended.
Radicon thread here.
Flickr gallery here.
by
Pitcher
This is "set A". You will also need to purchase "Rhombic18 puzzle set B" for a complete puzzle. This is easiest to do by using the "Add Set to Cart" button below.
The Rhombic18 puzzle is a face and vertex turning rhombic dodecahedron with 18 axes of rotation. 12 axes go through the faces of the puzzle, and the other 6 axes go through the four-sided vertexes. Rhombic18 can also jumble if the faces are turned at less than 180 degrees.
Rhombic18 comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Rhombic18 also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The ones I used came from this shop. You'll need two sets of screws (12 total).
Please be sure to also order "Rhombic18 puzzle set B", otherwise you will not have all the parts required! This is easiest to do by using the "Add Set to Cart" button below.
Have fun!
+ 
The Rhombic18 puzzle is a face and vertex turning rhombic dodecahedron with 18 axes of rotation. 12 axes go through the faces of the puzzle, and the other 6 axes go through the four-sided vertexes. Rhombic18 can also jumble if the faces are turned at less than 180 degrees.
Rhombic18 comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Rhombic18 also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The ones I used came from this shop. You'll need two sets of screws (12 total).
Please be sure to also order "Rhombic18 puzzle set B", otherwise you will not have all the parts required! This is easiest to do by using the "Add Set to Cart" button below.
Have fun!
Want to get a set?
+ 
by
snowfox01
The only PAK-50 available in 6mm scale. Easy-to-finish model ideal for both wargaming and the aircraft collector. Sukhoi design for a stealthy aircraft with supercruise, roughly comparable to the F-22, and intended to replace the MiG-29 and Su-27. Should enter service around 2015 and be built jointly with India in 2020.
by
fakebusker83
Version 1.0
A pair of Sickles favoured for use by the D.R.E.A.D team. Each Sickle has a vertical and horizontal 5mm peg for different mounting methods, and measures 73 mm from handle to blade.
This model is successfully tested in White Strong Flexible.
A pair of Sickles favoured for use by the D.R.E.A.D team. Each Sickle has a vertical and horizontal 5mm peg for different mounting methods, and measures 73 mm from handle to blade.
This model is successfully tested in White Strong Flexible.
by
fakebusker83
Version 2.0
“None but the mightiest soldiers are able to wield the Cosmic Defenestrator. Originally designed for anti-flier defenses on orbital space stations, the Defenestrator has seen action in all theatres of war. This is very much due to the massive firepower it can bring to bear on its enemies. Its special recoil-absorbing tri-barrel system ensures a insanely high rate of fire of high-calibre shells while preventing the arms of the gunner from being sheared off by the massive forces involved.
Particular flier squadrons made it their modus operandi to load up on magazines of oxidizate shells, achieve altitude and let loose with a relentless cloud of metal eating projectiles. Even with the horrific consequences we have witnessed, no soldier was ever caught and tried for war crimes.”
The Cosmic Defenestrator comes with a main handle that can be mounted in 2 positions, as well as an auxiliary handle on a balljoint. This second handle can be clipped onto any 3mm rail, and can be used to offer additional support for the Defenestrator’s weight. Also, this set comes with a laser sight accessory.
The Defenestrator is 10.9 cm in length.
This model has been successfully tested in White Strong Flexible.
“None but the mightiest soldiers are able to wield the Cosmic Defenestrator. Originally designed for anti-flier defenses on orbital space stations, the Defenestrator has seen action in all theatres of war. This is very much due to the massive firepower it can bring to bear on its enemies. Its special recoil-absorbing tri-barrel system ensures a insanely high rate of fire of high-calibre shells while preventing the arms of the gunner from being sheared off by the massive forces involved.
Particular flier squadrons made it their modus operandi to load up on magazines of oxidizate shells, achieve altitude and let loose with a relentless cloud of metal eating projectiles. Even with the horrific consequences we have witnessed, no soldier was ever caught and tried for war crimes.”
The Cosmic Defenestrator comes with a main handle that can be mounted in 2 positions, as well as an auxiliary handle on a balljoint. This second handle can be clipped onto any 3mm rail, and can be used to offer additional support for the Defenestrator’s weight. Also, this set comes with a laser sight accessory.
The Defenestrator is 10.9 cm in length.
This model has been successfully tested in White Strong Flexible.
by
Pitcher
The Pentacle puzzle is essentially a pentagonal floppy cube. It turns on five axes, one at each point of the star shape. It is a bit trickier than it might seem at first glance since the reverse side shown the same pattern, but it is mirrored.
This model is only the color chips used to complete the puzzle. You will also need to purchase the Pentacle puzzle model, which is the functioning frame for the parts.
The pentacle is a pagan symbol often used as a talisman by practitioners of Wicca. The circle represents unity and wholeness, and the star represents the elements that make up the world. The white point of the star represents the spirit, blue represents water, red is fire, green is earth, and yellow is air. The circle binds these elements together to create life.
This model is made in full color sandstone, and provides the colored parts of the puzzle. No stickers are required, but I strongly recommend spraying the finished puzzle with a clear coat to protect the sandstone. Use several light coats, and make sure to let them dry and test the turning between each coat.
Please be sure to assemble these color chips into the completed puzzle correctly. Refer to the 3D color rendering above to get the pattern right. The parts are not easy to remove once they are pushed into place!
Have fun!
This model is only the color chips used to complete the puzzle. You will also need to purchase the Pentacle puzzle model, which is the functioning frame for the parts.
The pentacle is a pagan symbol often used as a talisman by practitioners of Wicca. The circle represents unity and wholeness, and the star represents the elements that make up the world. The white point of the star represents the spirit, blue represents water, red is fire, green is earth, and yellow is air. The circle binds these elements together to create life.
This model is made in full color sandstone, and provides the colored parts of the puzzle. No stickers are required, but I strongly recommend spraying the finished puzzle with a clear coat to protect the sandstone. Use several light coats, and make sure to let them dry and test the turning between each coat.
Please be sure to assemble these color chips into the completed puzzle correctly. Refer to the 3D color rendering above to get the pattern right. The parts are not easy to remove once they are pushed into place!
Have fun!
by
Pitcher
The Pentamid puzzle is based on the geometry of the pentagonal dipyramid. It turns on the five edges around the equator of the puzzle, as well as on the two polar vertices. Each vertex can turn in increments of 72 degrees, while the edges are limited to 180 degree turns. The Pentamid puzzle becomes scrambled fairly quickly with just a few turns.
The Pentamid puzzle comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Pentamid also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The springs I used came from this shop. You'll need seven of the springs, combined with seven 12mm M3 screws, which you'll need to purchase separately.
Have fun!
The Pentamid puzzle comes as a DIY kit of parts, and you will need to supply your own stickers. The templates for the stickers are available in the instructions forum.
I recommend that unless you are familiar with the process of dyeing these parts, you purchase the puzzle in "Black Strong & Flexible". It costs a bit more than the white material, but it's worth it since the finished puzzle will look and work better. Pentamid also requires screws and springs to assemble. These can be purchased through a few different online puzzle sellers. The springs I used came from this shop. You'll need seven of the springs, combined with seven 12mm M3 screws, which you'll need to purchase separately.
Have fun!
by
Kidmechano
6-hole Utility Belt for ModiBot figure kits- Build, create and customize your own Action Bot! Each figure kit is highly-poseable, modular, and upgradeable using a simple snap-fit, ball joint construction!
