by
fakebusker83
In response to requests from friends and supporters, I did a revised version of my posable hands for the DOTM leader Sentinel Prime figure, this time to be much more movie accurate and with even more detail!
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
by
fakebusker83
Version 1.5
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
by
fakebusker83
Version 2.0
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.
The blades contain sharp edges and small parts, not suitable for children.
The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.
Click here to order only the blasters.
by
fakebusker83
Version 1.6
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
A pair of blasters for Transformers Prime deluxe Arcee figure. They are specially designed to be mounted on her forearm 5mm peg sockets, and they have an additional socket for her blade weapons to be mounted underneath.
Also, they can be mounted on the side of her bike mode by using the same attachment to the blades.
Printing in Detail material is recommended.
by
thehiddenice
Each badge is about 1.25 x 1.25 x .25. If anyone is interested in Individual badges, let me know and I'll upload them separately.
More badges to come.
by
Kidmechano
Build and customize your own Action Bot!- Modular, upgradeable, figure kit- highly poseable, snap-fit, ball joint construction! **This figure includes both knife and sheath accessories.** You can see a video showing how the figure assembles in the product pictures embedded above and a turnable 3d viewer of the model at- http://skfb.ly/5k4hedcb Enjoy!
by
fakebusker83
Version 3.0
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.
This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.
TFW2005 thread here.
Flickr gallery here.
by
fakebusker83
Version 2.0
Yup, here's my first offering for upgrading your DOTM figures! There has been many awesome customs of Sentinel Prime lately, and you'll only need a couple of expressive, posable fists to make them complete!
Yup, here's my first offering for upgrading your DOTM figures! There has been many awesome customs of Sentinel Prime lately, and you'll only need a couple of expressive, posable fists to make them complete!
by
fakebusker83
Version 2.5
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
by
Mr_props
a fully articulated mini figure that can twist torso and bend knees. Made to be compatible with most brick brands. Please be gentle when connecting parts together especially the knees. If you order it with a coloured material, you may have to remove some of the polyamide powder that will be stuck inside the knees' joints (you can remove it using a toothpick).
by
fakebusker83
Version 3.0
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
"It's Seismus. The 'S' is silent."
Seismus hails from the Smashmasters, a clan of alien robots who eschews the cowardly methods of ranged combat in preference of going into the thick of things and smashing their enemies. Obviously, no matter how good their legendary close combat skills are, many of them are unable to survive the realities of war, and many of them perished to the guns they hated so much.
There are few who remain, but those with the fortune of having one as an ally will discover they still seethe with uncontrollable rage and raw power.
Seismus comes armed with a spear, shield and a mini-Seismus hammer, and he can be transformed into a lethal war hammer. The shaft of the spear, or the handle of the hammer is 3mm in diameter, but he comes with 2 conversion sheaths to allow larger figures with 5mm peg fists to be able to hold him.
This model is tested in White Strong Flexible.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
A fusion cannon and blade replacement for the TF: Prime Powerizer Megatron figure! This set includes a fusion cannon and an forearm armour attachment with a fold-out blade.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
All components need to be assembled, and the cannon is designed to accommodate an LED circuit.
For the "Dark Energon" variant, click here
This model has been successfully tested and recommended in White Strong Flexible material.
by
Vidalcris
Cheaper smaller version without gun :
Day of the Tentacle, also known as Maniac Mansion II is a 1993 epic graphic adventure game developed and published by LucasArts.
Purple Tentacle, one of the crazy Dr. Fred's creations, drinks contaminated water from Dr. Fred's Sludge-o-matic. He mutates into an insane genius and grows arms, and now he's plotting to take over the world.
Look at my shop i got so many models !
Day of the Tentacle, also known as Maniac Mansion II is a 1993 epic graphic adventure game developed and published by LucasArts.
Purple Tentacle, one of the crazy Dr. Fred's creations, drinks contaminated water from Dr. Fred's Sludge-o-matic. He mutates into an insane genius and grows arms, and now he's plotting to take over the world.
Look at my shop i got so many models !
by
fakebusker83
Version 1.5
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
by
Kidmechano
Breathe a bit of new life into your Xevoz collection! ModiBot X figure kit ver 2.0- build and customize your own Action Hero! Each figure kit is highly-poseable, modular, and upgradeable using a simple snap-fit, ball joint construction! ---- accepts many parts and accessories from Xevoz action figure kits using 6mm ball & socket and 4mm square peg system- UPDATE- New head, feet, and shin for improved fit and posability.
by
fakebusker83
Version 1.5
A pair of claw weapons for the HFTD Tomahawk figure! This design is inspired by the appearance of the Wrecker Whirl in the IDW comics, and are meant to emulate his 4 fingered claw design.
Each finger-claw has 2 ball joints and are mounted on a wrist section which can rotate 360d as well.
Because of the fist-sheath that is supposed to hide the original hands of the figure, these claws are not suitable for all figures. As a rough guideline, the width of the figure's forearm should be equal to or narrower than 12mm. Also, the figure should be able to hold a 5mm peg handle.
A pair of claw weapons for the HFTD Tomahawk figure! This design is inspired by the appearance of the Wrecker Whirl in the IDW comics, and are meant to emulate his 4 fingered claw design.
Each finger-claw has 2 ball joints and are mounted on a wrist section which can rotate 360d as well.
Because of the fist-sheath that is supposed to hide the original hands of the figure, these claws are not suitable for all figures. As a rough guideline, the width of the figure's forearm should be equal to or narrower than 12mm. Also, the figure should be able to hold a 5mm peg handle.
by
fakebusker83
Version 1.5
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.
The Minigun measures 126 mm in length.
This set also comes with 2 bombs.
This model has been successfully tested in White Strong and Flexible.
TFW2005.com thread here.
Flickr set here.
by
fakebusker83
Version 1.0
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
by
fakebusker83
Version 2.0: Handle is shaped to a straight cylinder for better grip.
This is the hilt section of the Deicidium blade, consisting of the handle piece and pommel attachment. Includes an auxiliary peg on the side for storage.
The handle is 5mm peg compatible.
Printing in Black Strong Flexible is recommended.
Click here for Part B (136mm long blade).
Click here for Part B (110mm long blade).
Version 2.0 is tested in Black Strong Flexible and Frosted Ultra Detail.
You might also be interested in getting the Desecrated Vambrace.
This is the hilt section of the Deicidium blade, consisting of the handle piece and pommel attachment. Includes an auxiliary peg on the side for storage.
The handle is 5mm peg compatible.
Printing in Black Strong Flexible is recommended.
Click here for Part B (136mm long blade).
Click here for Part B (110mm long blade).
Version 2.0 is tested in Black Strong Flexible and Frosted Ultra Detail.
You might also be interested in getting the Desecrated Vambrace.
by
fakebusker83
Version 1.0
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
by
fakebusker83
Version 2.0
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.
Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.
If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.
This model is tested in Frosted Ultra Detail.
Flickr gallery here.
TFW2005 thread here.
by
fakebusker83
Version 2.0
This mace comes in two parts which you have to order separately from Shapeways. This is part B, consisting of the blades and attack spike. Printing in Transparent Detail or Frosted Ultra Detail is recommended.
Link to Megamace Part A.
Link to MegaFlail Part A.
This mace comes in two parts which you have to order separately from Shapeways. This is part B, consisting of the blades and attack spike. Printing in Transparent Detail or Frosted Ultra Detail is recommended.
Link to Megamace Part A.
Link to MegaFlail Part A.
by
Kidmechano
ModiRaptor is the scourge of the ModiBot universe and 47 parts of poseable madness. Highly articulated tail and body. Vice-like jaws and 12 moving claws. Compatible with ModiBot hex-fit figures and accessories. What can you imagine and build with these parts? Here is a download link for an Instructions- https://www.dropbox.com/sh/s4vil011e6yh916/B6w8_cOWDB
by
fakebusker83
Version 2.0
This mace comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces and connector. Printing in Strong Flexible is recommended.
Link to Part B.
This mace comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces and connector. Printing in Strong Flexible is recommended.
Link to Part B.
by
fakebusker83
Version 1.0
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
by
fakebusker83
Version 2.0
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!
Version 2.0 has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr gallery here.
by
fakebusker83
Version 2.5
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you!
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you!
by
fakebusker83
Version 2.0
This pair of hands are specially designed for the Human Alliance Bumblebee figure! Not only are they extremely posable, the right arm cannon feature of the figure is preserved and everything fits nicely in alt mode!
TFW2005 thread here (with assembly instructions.)
This pair of hands are specially designed for the Human Alliance Bumblebee figure! Not only are they extremely posable, the right arm cannon feature of the figure is preserved and everything fits nicely in alt mode!
TFW2005 thread here (with assembly instructions.)
by
fakebusker83
A pair of wrists, hands and add-on accessories for the ROTF voyager Starscream figure! Every finger is posable on ball joints, and the wrists are double-jointed for maximum posability!
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
fakebusker83
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you! Note: This design contains only his right hand.
by
fakebusker83
Version 2.0
This is the Desecrated Vambrace add-on for TF: Prime Powerizer Megatron! It attaches to his forearm via two 5mm pegs. The intricate layers of armour weave into one another and they form one solid piece, no assembly required!
This model has been successfully tested in White Strong Flexible.
You might also be interested in getting the Deicidium sword.
This is the Desecrated Vambrace add-on for TF: Prime Powerizer Megatron! It attaches to his forearm via two 5mm pegs. The intricate layers of armour weave into one another and they form one solid piece, no assembly required!
This model has been successfully tested in White Strong Flexible.
You might also be interested in getting the Deicidium sword.
by
fakebusker83
Version 1.5
Edit: Added spare fingers. Just in case!
A variant of the hands done for the Masterpiece Seeker figure, but this version has its wrist joint replaced with a ridged peg. The wrist peg is 5mm in diameter and peg section is 7mm long.
Edit: Added spare fingers. Just in case!
A variant of the hands done for the Masterpiece Seeker figure, but this version has its wrist joint replaced with a ridged peg. The wrist peg is 5mm in diameter and peg section is 7mm long.
