Update: Dremelfuge is now provisionally available in the "Strong and Flexible" material, after some basic testing. No guarantee of safety is given, as always. The "Strong & Flexible" material Dremelfuge creates more vibration in use, which may indicate less stability than the "Grey Robust" (ABS) material. Caveat Emptor: As always, Dremelfuge is sold as an ornament, and any use as a tool is a risk entirely taken by the purchaser/user. I accept no responsibility for the safety of Dremelfuge.

DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.

At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.

Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.

It requires only the 5mm cutting tool holder that comes with the Dremel 300.

For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.

The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483

Low polygon Cloud Strife from Final Fantasy 7. I modeled him identical to the original low poly you see in the FF7 videogame (not the cutscenes version or fights version, but the playable, big headed one you actually control).

#####This is NOT an official model by Square Enix#####
I just made it myself since I couldn't find official merchandise with the low poly character.

The 3d print looks great, though the hair isn't as spiky as it should be, since color printing can't do such sharp points.

Early Earth Cruiser
1/4000 scale
1/8" (3.2 mm) stand hole
Recommend Trans Detail
Works in WS&F

A rugged, long-ranged ship built to chart the endless frontiers of outer space.

 5cm Hoodie is the creation of Culprit art, you can check out his blog here: Culprit Toys and here Culprit Art , the pattern is from Jon Burgerman. 

Hoodie comes in many variations and can be found in the Dot San shop.

More Hoodies:
Burgerman Hoodies, 7cm, 5cm & 2cm

Plain Hoodies 
Red 7cm & 2cm
Green 7cm & 2cm
Blue 7cm & 2cm
White 7cm & 2cm
Black 7cm & 2cm

Customized 
Hibs Hoodie 7cm
Hearts Hoodie 7cm

The pattern, colours and size can be changed or even personalised, drop me an email at Dot San to discuss your requirements.

www.dotsan.com 

A fast, heavily armed and armored VTOL for ground support missions.

This is a game accurate replica of the Spanish Gold Coins that are featured Uncharted: Drake's Fortune. It was sculpted by me from in-game reference using ZBrush. This listing is for one coin only. NOTES ON THE PRINTS I got test coins printed in Gold Plated Glossy, White Strong & Flexible and Frosted Ultra Detail. You can find pictures of the GPG and WSF version above, however it was near impossible to get a decent picture of the FUD version. That said the detail on it is on par with the GPG version and definitely a step up on the WSF. For me though the pick of them all is the Gold Plated Glossy, it came out far far better than I could have ever hoped, the detail is great and it has a really nice weight to it as well. Hope you like this new item and keep an eye out for more soon.

The Ngaksu Fury is a fast, aggressive scout ship.

Shinano naval miniature ship, scale model 1:1800 , fleet carrier
Initially laid down as the third of the Yamato-class battleships, Shinano′s partially complete hull was converted to an aircraft carrier in 1942, midway through construction. When launched on 5 October 1944, she had a full-load displacement of 72,000 long tons (73,000 t), the largest aircraft carrier ever built at the time.

Shinano was sunk by the American submarine USS Archer-Fish 10 days after her commissioning.

Displacement: 73,000 t

Complement: 2,400

This is a H0e scale model designed to fit around a Life-Like SW9 chassis with only small adjustments required to the chassis.

Couplings are also required to complete the model.

Replacement for PD09-0012
Part Number: BWE-006816
Material: PA2200
approx.weight: 35g (slight weight increase)

Bearing Distance is now 34mm (Swingarm Spacer PD10-0029 not needed anymore)

The BOX Design makes the rear Swingarm stiffer.

Please keep in mind that these parts are PROTOTYPES.
Be careful when using these parts below Temperatures of 10°C.

A long-range fire support mecha. This 2-piece model is 2.8cm tall when assembled.

Cheaper smaller version without gun :


Day of the Tentacle, also known as Maniac Mansion II is a 1993 epic graphic adventure game developed and published by LucasArts.

Purple Tentacle, one of the crazy Dr. Fred's creations, drinks contaminated water from Dr. Fred's Sludge-o-matic. He mutates into an insane genius and grows arms, and now he's plotting to take over the world.


Look at my shop i got so many models !

1/144 Airco DH.5 British WWI fighter.

The Airco DH.5 was a British First World War single-seat fighter aircraft specifically designed to replace the obsolete Airco DH.2. The DH.5 was one of the first British fighter designs to include the improved Constantinesco interrupter gear to allow a forward-firing machine gun to fire through the propeller arc more effectively than the older mechanical gears. Although developed rapidly, by the time of its operational introduction, other superior aircraft were available and its service life was short.

Perfect for the wargamers and collectors.

1/4000th
1/8th Inch Stand Hole
Recommend Trans Detail
Will work in WS&F

Powerful hand-held thermal cannon converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of two handles, either of which can be glued in to the mounting point on the figure's back. Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.

Supplied as a 16-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.

Assembly instructions coming soon...

Now you can actually touch and feel your childhood nostalgia with this remarkable 3D pixel style Pop art tribute to the legendary 8-bit Super Mario Bros. game for the classic Nintendo Entertainment System (NES).

The design features the authentic Super Mario Bros. pixel game characters and scenery graphics, carefully translated to three-dimensional shapes. The sculpture can be viewed from all sides and is produced using a robust and durable full-color sandstone material.

The pipe can be used as a pen holder or even as a small plant pot, to grow your own Mario Piranha Plant from the pipe. Let your creativity go wild.

Enjoy the envious glances of your friends and colleagues when a piece of Mario's retro game world is proudly inhabiting your desk. Or feel the intense, eternal love of your partner when you surprise him or her with this exclusive wannahave gadget.

The individual elements (decor, Mario, Koopa and Goomba) can also be ordered separately from the Sevensheaven 3D Print Store, with the advantage of being able to determine your own placement of the characters on the stage, and of course being able to play with the characters and feel like a kid again.

1/4000th scale
1/8th inch stand hole
Recommend Trans. Detail
Will work in WS&F

1/4000 scale
1/8" stand hole
Best in trans. detail

An open framework for large-scale construction and major starship repairs.

The Xuvaxi Protectorate''s police cruiser, loaded with security forces and shuttles.

Ninja mask from Mortal Kombat