Discover » Miniatures
by
Drawn-SteelHero
Powerful hand-held thermal cannon converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of two handles, either of which can be glued in to the mounting point on the figure's back. Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Supplied as a 16-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions coming soon...
Gun mode comes with a choice of two handles, either of which can be glued in to the mounting point on the figure's back. Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole. Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Supplied as a 16-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions coming soon...
by
sevensheaven
Now you can actually touch and feel your childhood nostalgia with this remarkable 3D pixel style Pop art tribute to the legendary 8-bit Super Mario Bros. game for the classic Nintendo Entertainment System (NES).
The design features the authentic Super Mario Bros. pixel game characters and scenery graphics, carefully translated to three-dimensional shapes. The sculpture can be viewed from all sides and is produced using a robust and durable full-color sandstone material.
The pipe can be used as a pen holder or even as a small plant pot, to grow your own Mario Piranha Plant from the pipe. Let your creativity go wild.
Enjoy the envious glances of your friends and colleagues when a piece of Mario's retro game world is proudly inhabiting your desk. Or feel the intense, eternal love of your partner when you surprise him or her with this exclusive wannahave gadget.
The individual elements (decor, Mario, Koopa and Goomba) can also be ordered separately from the Sevensheaven 3D Print Store, with the advantage of being able to determine your own placement of the characters on the stage, and of course being able to play with the characters and feel like a kid again.
The design features the authentic Super Mario Bros. pixel game characters and scenery graphics, carefully translated to three-dimensional shapes. The sculpture can be viewed from all sides and is produced using a robust and durable full-color sandstone material.
The pipe can be used as a pen holder or even as a small plant pot, to grow your own Mario Piranha Plant from the pipe. Let your creativity go wild.
Enjoy the envious glances of your friends and colleagues when a piece of Mario's retro game world is proudly inhabiting your desk. Or feel the intense, eternal love of your partner when you surprise him or her with this exclusive wannahave gadget.
The individual elements (decor, Mario, Koopa and Goomba) can also be ordered separately from the Sevensheaven 3D Print Store, with the advantage of being able to determine your own placement of the characters on the stage, and of course being able to play with the characters and feel like a kid again.
by
Ghostrunner
1/4000th scale
1/8th inch stand hole
Recommend Trans. Detail
Will work in WS&F
1/8th inch stand hole
Recommend Trans. Detail
Will work in WS&F
by
Ammnra
Kit turns a Puzzle Cube into a Portal Companion Cube Puzzle
NOTE: This is just the white parts of the kit. Also buy Portal Puzzle KIt (1\2) for the whole set of parts
Instructions:
--Paint a Circle of Color on Each Side of Your Puzzle Cube (circle should be same size as black hoop part )
--Attach Corner parts using Super Glue
--Attach Edge parts using Super Glue (centering edges between corner parts)
--Attach Center parts using Super Glue (centering them in center square)
--Attach Black Hoop Parts using Super Glue (Center Parts with Edge Parts (Glue 100% of part to Cube or Hoops will fall off after next step)
--Carefully Dremel or Sand the Hoop Parts into 9 Sections Along Puzzle Cube Lines To Free the Puzzle Cube for Spinning/Solving\Un-Solving.
Thanks for your order and commitment to nerd culture!
NOTE: This is just the white parts of the kit. Also buy Portal Puzzle KIt (1\2) for the whole set of parts
Instructions:
--Paint a Circle of Color on Each Side of Your Puzzle Cube (circle should be same size as black hoop part )
--Attach Corner parts using Super Glue
--Attach Edge parts using Super Glue (centering edges between corner parts)
--Attach Center parts using Super Glue (centering them in center square)
--Attach Black Hoop Parts using Super Glue (Center Parts with Edge Parts (Glue 100% of part to Cube or Hoops will fall off after next step)
--Carefully Dremel or Sand the Hoop Parts into 9 Sections Along Puzzle Cube Lines To Free the Puzzle Cube for Spinning/Solving\Un-Solving.
Thanks for your order and commitment to nerd culture!
by
coines23
The Xuvaxi Protectorate''s police cruiser, loaded with security forces and shuttles.
by
coines23
A heavily armed and armored walker, designed for taking down large, fixed installations.
This 2 piece model is 3.6cm tall when assembled.
This 2 piece model is 3.6cm tall when assembled.
by
Ammnra
Replica inspired by the Apple Piece of Eden from the UbiSoft's Assassin's Creed Series
ATTENTION:The parts in the video/pics have been assembled, detail painted, and have LED light systems added . The Shapeways parts will NOT be.
They will be white.
Step-By-Step Assembly and Painting Instructions
Want a smaller (and less expensive) version?
Smaller SIze Replica
ATTENTION:The parts in the video/pics have been assembled, detail painted, and have LED light systems added . The Shapeways parts will NOT be.
They will be white.
Step-By-Step Assembly and Painting Instructions
Want a smaller (and less expensive) version?
Smaller SIze Replica
by
polyrize
Minah is a young female warrior bearing a huge battle scythe.
This miniature Fits very well with other 54mm models.
You can paint it with acrylic paints.
You should spray the model with primer before paiting it.
This miniature Fits very well with other 54mm models.
You can paint it with acrylic paints.
You should spray the model with primer before paiting it.
by
phat5honey
Smoke box dog for Challenger and Big Boy. 1/8th scale, use 5-40 rod and nut. I have not tested Alumide on a hot smoke box yet.
by
aegidian
Six 1:200 scale, detailed miniatures of the Grand Prix winning cars from the classic 1976 Formula One season.
McLaren M23 (James Hunt)
Ferrari 312 T2 (Niki Lauda, Clay Regazzoni)
Tyrrell P34 (Jody Scheckter)
Lotus 77 (Mario Andretti)
March 761 (Ronnie Peterson)
Penske PC4 (John Watson)
Suitable for use with the Formula D, Formula De, or Speed Circuit boardgames or any similar 1:200 scale racing games.
Or simply as a miniature display of six exquisite racing machines.
Sadly, these models cannot be printed in the strong and flexible nylon, as the details on the car wings is too fine to print accurately in this material.
McLaren M23 (James Hunt)
Ferrari 312 T2 (Niki Lauda, Clay Regazzoni)
Tyrrell P34 (Jody Scheckter)
Lotus 77 (Mario Andretti)
March 761 (Ronnie Peterson)
Penske PC4 (John Watson)
Suitable for use with the Formula D, Formula De, or Speed Circuit boardgames or any similar 1:200 scale racing games.
Or simply as a miniature display of six exquisite racing machines.
Sadly, these models cannot be printed in the strong and flexible nylon, as the details on the car wings is too fine to print accurately in this material.
by
QUATRO
Companion Cube storage box
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
by
miniatures
HMS Vanguard naval miniature ship, scale model 1:1800 , battleship
HMS Vanguard was a British fast battleship built during World War II and commissioned after the end of the war. She was the only ship of her class and was the biggest, fastest and last of the Royal Navy's dreadnoughts, and the final battleship to be launched in the world.
Using four twin 15-inch mountings in storage allowed for the construction of a single fast battleship more quickly than building the Lion-class ships. The turrets were originally used by the battlecruisers Courageous and Glorious during World War I and were removed during the conversions of these ships to aircraft carriers in the 1920s.
Launched: 30 November 1944
Displacement: 51,420
Commissioned: 9 August 1946
Complement: 1,975
HMS Vanguard was a British fast battleship built during World War II and commissioned after the end of the war. She was the only ship of her class and was the biggest, fastest and last of the Royal Navy's dreadnoughts, and the final battleship to be launched in the world.
Using four twin 15-inch mountings in storage allowed for the construction of a single fast battleship more quickly than building the Lion-class ships. The turrets were originally used by the battlecruisers Courageous and Glorious during World War I and were removed during the conversions of these ships to aircraft carriers in the 1920s.
Launched: 30 November 1944
Displacement: 51,420
Commissioned: 9 August 1946
Complement: 1,975
by
Jengineer
What the world needs is more polyhedral dice, of course.
A test run with leaves and vines design.
White detail or steel is recommended. WSF has poor resolution on the numbers. Steel is hollow and looks fantastic. Detail material doesn't empty well, so dice are more solid.
A test run with leaves and vines design.
White detail or steel is recommended. WSF has poor resolution on the numbers. Steel is hollow and looks fantastic. Detail material doesn't empty well, so dice are more solid.
by
coines23
The Jovian Alliance's workhorse, carrying more weapons and fighters than any other ship in the fleet.
by
kampfflieger
1/144 Caproni Ca.3 WWI Italian bomber.
Developed in late 1916, the Caproni Ca.3 biplane bomber used the same airframe and landing gear as its predecessors, the Ca.1 and Ca.2. With more powerful engines, improved performance and increased bomb capacity, the Ca.3 bomber series was produced in large numbers and remained in service until the end of the war.
Developed in late 1916, the Caproni Ca.3 biplane bomber used the same airframe and landing gear as its predecessors, the Ca.1 and Ca.2. With more powerful engines, improved performance and increased bomb capacity, the Ca.3 bomber series was produced in large numbers and remained in service until the end of the war.
Perfect for the wargamers and collectors.
by
ZeusRage
Cool android hand that can be used as a paper weight or as an epic desktop item.
by
ICU
**Orders made before 9/1/11 may require a small amount of sanding. Message me for details**
This is a "Beefy" version of the propeller mount found on the UMX Sbach and UMX Beast 180 Brushless Motors. (3 pcs so you always have a spare and also to help absorb the startup costs shapeways charges)
This mount has been redesigned to use GWS props & have a larger backing surface for the propeller to rest against. And no additional spacer is needed to give the propeller space away from the cowl. This will help prevent the mount from breaking right behind the propeller. I also redesigned the area that bolts to the motor to give a little "give" in the event of a crash or hard propeller strike.
All that is needed to complete are the screws used with the stock 180 propeller mount and a GWS Propeller. I recommend using a GWS 5030 for the UMX Sbach and a GWS 5043 for the UMX Beast.
This is a "Beefy" version of the propeller mount found on the UMX Sbach and UMX Beast 180 Brushless Motors. (3 pcs so you always have a spare and also to help absorb the startup costs shapeways charges)
This mount has been redesigned to use GWS props & have a larger backing surface for the propeller to rest against. And no additional spacer is needed to give the propeller space away from the cowl. This will help prevent the mount from breaking right behind the propeller. I also redesigned the area that bolts to the motor to give a little "give" in the event of a crash or hard propeller strike.
All that is needed to complete are the screws used with the stock 180 propeller mount and a GWS Propeller. I recommend using a GWS 5030 for the UMX Sbach and a GWS 5043 for the UMX Beast.
by
kampfflieger
1/144 Junkers D.I WWI fighter.
Perfect for the wargamers and collectors.
Perfect for the wargamers and collectors.
by
Mechanoid
Here are some very famous sci fi shuttle eagle transports from 1970s television. These are the 4 variations in 1/1000 scale, perfect for table top gaming, fleet style gaming. These were designed for WSF material, but I realize some prefer max detail with FUD, so I am keeping that material open for these. But do try to remember FUD is extremely weak and breaks easy. Remember ShapeWays tends to rotate designs in their printing containers, this sometimes changes the details in the appearance of the designs. ***Try some of our other ships to go with these & let us know what you think.*** Down in the comments area, we have a picture shared with us, from modeler Scouls502, Just click the little pic, and it will load the full size picture. Plus one he did for us to post in as the default picture. Scouls502 truely did these designs justice. The level of detail he was able to show in the designs, well we didn't honestly think it would show that well. Scouls502 good on you Sir. Have some cookies. PLEASE RATE THIS MODEL.
by
engineer
German shovel with grab, a test to us the new material "Ultra Frosted Detail" (TT scale; 1:120)You only must cut the rods between drivers cab and chassis / roof. You need still a little bit wire to connecting parts and to use as hydraulic cylinders, some paint and ´plastic windows and after a few hours you are finished the model.
Deutscher Bagger mit Greifer, ein Test für die Benutzung des neuen Werkstoffs "Ultra Frosted Detail"
(Spur TT; M 1:120)Sie müssen nur die Stützen zwischen Fahrkabine und Fahrwerk / Dach und am Greifer entfernen. Weiterhin benötigen sie etwas Draht für die Verbindung der Teile und für die Hydraulikzylinder, noch etwas Farbe und Kunststofffenster und nach einigen Stunden ist Ihr Modell fertig.
Deutscher Bagger mit Greifer, ein Test für die Benutzung des neuen Werkstoffs "Ultra Frosted Detail"
(Spur TT; M 1:120)Sie müssen nur die Stützen zwischen Fahrkabine und Fahrwerk / Dach und am Greifer entfernen. Weiterhin benötigen sie etwas Draht für die Verbindung der Teile und für die Hydraulikzylinder, noch etwas Farbe und Kunststofffenster und nach einigen Stunden ist Ihr Modell fertig.
