An assassin's ring with a gap in the bottom to activate a hidden blade. The ring itself is about 19.35mm wide, that should translate to 9 1/2 ring size in the US. Remember silver is the most suited for rings, stainless steel will give you a worn out look.

This is a OO Gauge model of a CIE Ballast Hopper. It has been designed to fit the Dapol Prestwin chassis. Hopper is built in two sections, they can be joined together or glued one piece above the chassis and one piece below. (A longer version is available to fit the Hornby 21t chassis, head back to the shop for details).

! Important Material Notice ! : Recently some of you have tried to buy this model in WSF, Detail and other materials, but the model got rejected. I am very sorry about this, as this model used to be printable in those materials when I first offered it for buying, but since then the checking software of Shapeways got updated and rejects the model for having thin walls. Currently due to the strict Shapeways software, this model is only Printable in Frosted Ultra Detail material. This is confirmed as I have one on my desk made of Frosted Ultra Detail, with a rotating turbine.

This is a little thingy for your keychain. It is in the shape of a jet engine, a great gift for aircraft fans! The turbine inside is designed to rotate.

An orbital commerce hub, transferring goods between outer space and the world below.

Check out my blog: http://dynath40k.blogspot.com/ In future, may thin the walls or release larger sets. I'm not just a die hard Star Marine player, I also have a long revivified collection of robot corpses. To celebrate their new model line I tossed these together to replace their horrible green plastic rods. these are scaled the same as the old rods but bare the design marks of the new molded plastic guns. They are done up in a set of 20. A future release might be much larger if people have interest in more of them.

A fast, lightweight alien gunship.

Supermarine Seafire, miniature aircraft, 1:900, fighter
The Supermarine Seafire was a naval version of the Supermarine Spitfire specially adapted for operation from aircraft carriers. Seafires saw most service in the Far East Pacific campaigns, serving with No. 887 and 894 Squadrons, Fleet Air Arm, aboard HMS Indefatigable and joining the British Pacific Fleet late in 1944. Due to their good high altitude performance and lack of ordnance-carrying capabilities the Seafires were allocated the vital defensive duties of Combat Air Patrol (CAP) over the fleet. Seafires were thus heavily involved in countering the kamikaze attacks during the Iwo Jima landings and beyond.

Heinkel He 111, miniature aircraft, 1:900, Patrol bomber
The Heinkel was the most numerous and the primary Luftwaffe bomber during the early stages of World War II. It fared well until the Battle of Britain, when its weak defensive armament, relatively low speed, and poor maneuverability were exposed. Nevertheless, it proved capable of sustaining heavy damage and remaining airborne. As the war progressed, the He 111 was used in a variety of roles on every front in the European Theater. It was used as a strategic bomber during the Battle of Britain, a torpedo bomber during the Battle of the Atlantic, and a medium bomber and a transport aircraft on the Western, Eastern, Mediterranean, Middle Eastern, and North African Fronts.

1:220 Load for FlatCar

Europa, naval miniature ship, scale model 1:1800, carrier
The Europa (Flugzeugträger "I") was a planned conversion of the transport ship Europa during World War II. The loss of the battleship Bismarck and near torpedoing of her sistership Tirpitz in May 1941 and March 1942, respectively, spurred the Kriegsmarine to acquire aircraft carriers. Europa was one of several vessels selected for conversion into auxiliary aircraft carriers. As designed, the ship would have had an air complement of 24 Bf 109T fighters and 18 Ju 87C Stuka dive-bombers. Conversion planning began in May 1942, and had the conversion been finished, she would have been the largest German aircraft carrier, longer even than the purpose-built Graf Zeppelin-class aircraft carriers.

A rugged, versatile low-tech tank, heavily armed and armored for 6mm-scale wargaming.

Set of twelve American-style mailboxes.

Agile, stalwart defender of the Martian Elite Republican Guard.

A detailed full color model of each of the planets, gas giants, and major moons of the Solar system, to (logrithmic) scale.
This set includes the 20 largest objects in the solar system (bar the sun).
All surfaces are reproduced from NASA imaging.

For size reference, Jupiter is 25mm (1 inch) diameter, and Earth is 12.76mm (1/2 inch) diameter.
(A photograph of some of the planet models can be seen on th page for this subset of planets. Photos of this full set coming soon.)
This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.

The set contains all planets, a dwarf planet, and eleven moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
 - Moon / Luna
Mars
Jupiter
 - Ganymede
 - Callisto*
 - Io
 - Europa (attempt no landing there)
Saturn
 - rings of Saturn
 - Titan
 - Rhea*
 - Iapetus*
 - Dione*
Neptune
 - Tritan**
Uranus
 - Titania*
Pluto**

All objects have a 1.6mm (1/16th inch) hole at the south pole, for a brass axle (or a toothpick).

What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.

In areas where the model surface is more detailed than the most detailed NASA photography (such as Pluto), the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)

*Due to hard limitations of the Shapeways production, these minor moons are sharing the same surface map. They were chosen because they have a similar surface, and/or their surface is largely unknown.
**For the same reason, Pluto and Triton, which have a similar icy surface and not much photographic detail known, also share their surface map.
(The alternative was to not include those moons)

1:220 In two parts - Bucket is hinged
Open Windows available as separate model.

The Murustan Space Force's heavily stylized patrol cruiser, built to resemble their world's fiercest predators.

The 4x5x6 Cuboid is the next step up from my 3x4x5. This puzzle was made at the request of Sigurd Wedel. Just like the 3x4x5 this one shapeshifts as 90 degree turns are possible on the 4x6 faces.
In the design I've used a mechanism slightly different from that of my 3x4x5 and slightly more like a V-Cube. The result is a puzzle that rotates very smoothly, even better than the 3x4x5. This puzzle is truly very complex, having more than 40 different mechanical parts.

Read more about this puzzle on twistypuzzles.com

Buyer information & Claim your free set of stickers

This puzzle comes as a DIY kit. You will need to assemble the puzzle yourself and also provide your own screws (6 M3 screws of 10-15mm, suitable springs and small washers recommended). A free set of printed stickers is included, please send me an email after buying to claim your free stickers (I ship them separately, they're not included in your order from Shapeways). You can also purchase a fully assembled and stickered puzzle from me on request. Please contact me directly for this service.

A six piece dice set modeled using the triforce shape inspired by the legend of zelda.
Order includes one of each of the following: d4, d6, d8, d10, d12, d20.

Modeled in blender 2.60.4.

"Be strong for war. Be bold against enemies and evil, and defend the people of Tamriel."

With this amulet inspired by the Amulet of Talos from Skyrim, you can face the deadliest of foes and live to tell the tale. Talos, once Tiber Septim, is the patron Divine of Just Rulership and Civil Society. This amulet makes an ideal gift for anyone who respects justice, law, or society.

Pictured chain not included in design. Plastic models will not be painted.

This is an altered version of the gearbox model available from the ShapwaysMechanical page.
The parts have been perforated in some spots to be slightly more streamlined and also a little cheaper to produce too.

No assembly required, though the middle set of gears must be snapped down into position in order to engage the surrounding gears. I assume this was built into the design to keep larger gaps during the printing process.

1/144 LFG Roland D.II German WWI fighter.

Perfect for the wargamers and collectors.

DIY kit of Portal 2's iconic Turret. The kit need some assembly and is not in color. I designed it in pieces si it would be much easier to paint. Since it's in pieces it require glue and a pointy tool to clean the compacted powder from the antenna and back leg hole is also suggested. Once assembled it stand about 15 cm tall.