1:220

Painted model may be available at http://www.stonebridgemodels.com
Update: 2010/10/27 - made treads deeper.

1/144 Pfalz D.IIIA German WWI fighter.

The Pfalz D.III was a fighter aircraft used by the Luftstreitkräfte (Imperial German Air Service) during the First World War. The D.III was the first major original design from Pfalz Flugzeugwerke. Though generally considered inferior to contemporary Albatros and Fokker fighters, the D.III was widely used by the Jagdstaffeln from the fall of 1917 through the summer of 1918. It continued to serve as a training aircraft until the end of the war.

Perfect for the wargamers and collectors.

Contains all parts to build two H0 scale trailer. Axles are not included, but it's easy to make them. I included spare parts in this kit, as some can vanish...

This is a ring I created based on the one worn by Hal Jordan of the Green Lantern Corps. This version has a smaller face for a subtle look and feel. Choose your size from the list below and it will be added to your cart. You can select your preferred material in the cart before checkout.

Size 3 Size 3.5 Size 4 Size 4.5 Size 5
Size 5.5 Size 6 Size 6.5 Size 7 Size 7.5
Size 8 Size 8.5 Size 9 Size 9.5 Size 10
Size 10.5 Size 11 Size 11.5 Size 12 Size 12.5
Size 13 Size 13.5 Size 14 Size 14.5 Size 15

With the Shapeways Print-on-Demand service, you can order this ring in any size, in any material, at any time. Please note that, with the exception of the Full Color Sandstone material, the color, look, and feel of the ring is defined by the material you choose, not the model image.

This ring will be produced and delivered through Shapeways and it’s partners.

For questions regarding your order, please contact Shapeways through their contact page at shapeways.com/contact.

For questions regarding the design of this, or any of my other rings and models, feel free to send me a private message. Also, if you have any ideas for new rings that you would like to see me design, please let me know.

Green Lantern, Hal Jordan, and all related marks are trademarks of Warner Bros. and DC Comics.

Accused of being fake, witchcraft and simply impossible..
This kinetic sculpture is inspired by the unlimited freedom of 3d printing,
it wobbles and turns with a slight movement of the hand.
Give it a good spin and it moves in erratic and wild ways.

This is the 7.5cm / 3" version, see the Gyro the Forms section for other shapes and sizes.

Instructions
It is composed of four concentric cubes, each one spinning around a different axis.
The model needs some minor assembly:
Each inner cube has two knobs which need to be placed into the corresponding clamps in the parent cube. It's easiest to start with the inner most and continue outward.
And then... spin it away !

Corner stand for this 7.5cm model here.

Notes
Be careful with a cube this size, fingers may get pinched if handled carelesly.
It is not a toy for children!
Also please be careful with (the assembly of) the Alumide version as this material is less flexible/robust than the Strong & Flexible materials.

More
Virtox Shop

Nederlands setje Hoofdseinen voor schaal 1:87.
Set bevat:
- 6 linker Hoofdseinen
- 6 rechter Hoofdseinen

Let op: de Hoofdseinen moeten nog geschilderd / gespoten worden.

-------
Een hoofdsein is een spoorwegsein dat onderdeel uitmaakt van een blokstelsel of stationsbeveiliging en een opdracht om te stoppen kan tonen. Een hoofdsein wordt voorafgegaan door een ander hoofdsein of soms door een voorsein op remwegafstand. Het is in veel landen ook mogelijk hoofdseinen met voorseinen te combineren, wat voorkomt op drukke spoorlijnen met direct na elkaar volgende blokken. Hoofdseinen worden opgesteld voor gevaarpunten (bruggen, wissels, etc.) of kort voor de grens van een blok.


Geverfd voorbeeld:

A sexy oil warmer for use with tea light candels.

Requires a glass dish from an oil warmer.

Model shown is printed in Alumide for heat resistance.

This Universal Equinoctial Ring Dial 2 is a portable and self-orientating sundial. You can see how a similar dial works: http://www.sunwatchmaker.com/instructions.php .

This is an improved version of a previous model:
http://www.shapeways.com/model/132928/universal_ring_dial.html

You'll receive five parts unconnected and undyed. Follow these instructions:
1. Clean the parts with cold water and soft brushing to remove support material remaining from the 3d printing.
2. Dip the parts in cold tea for a couple of hours. Holes will get more dyed because of the support material trapped in them. The slider part doesn't have marks, but with the dying will get as yellowish as the other parts.
3. Paint with black ink the marks. Let dry the ink and then remove it with a wet sheet. This way, ink only remains in the marks. In the photo the slider and some zones of the rings weren't inked so they maintained the yellow tone because tea dyes all no flat surfaces. The hour ring has marks on both sides, but only one needs to be dyed.
4. Enter the slider with a little pressure through the slit of the central (month) bar. It's only possible over June and July marks. Then move the slider to the desired month and day mark. Each mark represents two days.
5. Deform lightly the meridian ring (the bigger one) in order to insert the hour ring. Be sure that both rings have their dyed faces on the same side when in folded position.
6. Deform again the latitude ring to put the central bar in position. Check the photo for the right orientation.
7. Finally, insert the eyelet through the "jasolo fecit" part of the meridian ring and displace it to the latitude value of your location. To improve the sliding of the eyelet, you can clean the path with a stick before the insertion (again the support material).

You can purchase the individual parts in case you need any replacement:
- Meridian ring: http://www.shapeways.com/model/185486/universal_ring_dial_2__meridian_ring_part_.html
- Hour ring: http://www.shapeways.com/model/185480/universal_ring_dial_2__hour_ring_part_.html
- Central Bar: http://www.shapeways.com/model/185737/universal_ring_dial_2__central_bar_part_.html
- Slider: http://www.shapeways.com/model/165846/universal_ring_dial_2__slider_part_.html
- Eyelet: http://www.shapeways.com/model/185479/universal_ring_dial_2__eyelet_part_.html

A dog, man's best friend.
It was a long way from the wild wolf to the pampered pet dog of these days. Remember, even your tiny terrier is a descendant of this wild and free beasts ... show some respect and treat them as friends, too!

In the sprit of this, the whistle is annoyingly loud to both: dogs and humans. So, this is no "silent" dog whistle.

The whistle was inspired by the antique whistles made in england in the late 1800s. If you want to know more about great whistlemakers like J. Hudson or T. Yates, check out one of this sites:
whistleshop.co.uk
whistlemuseum.com

This warship draws on its glorious heritage and herculean crew to prevail against the enemies of the Pact. This model is available in 60mm and 90mm long versions; this one is the 90mm variant.

This model needs some post production assemble.
Please, watch the attached video and key moments of assembling process.

Replica of Wooden splinter Bird of Happiness

Bird of Happiness is the traditional North Russian wooden toy, carved in the shape of a bird. It was invented by Pomors, the inhabitants of the coasts of the White and Barents Seas. The Bird of Happiness is made without glue or other fasteners, by carving thin petals for the bird’s wings and tail and then using a special method of spreading and curving them, also found in other products of the North Russian handicraft. The amulet is usually made of pine, fir, spruce, or Siberian cedar. It is suspended inside a house, guarding the family hearth and well-being.
Source(s):
http://en.wikipedia.org/wiki/Bird_of_Happiness_(toy)

It is 16 cm in diameter

The Xuvaxi Enforcer class battleship is a powerful extension of Xuvaxi diplomacy.

Feldbahn Kipplore ungebremst Spur 0f

Die Einzelteile Kippmulde, Rahmen und Klinken müssen von den Stegen getrennt werden. Nun noch etwas Farbe, die 4 Klinken mittels Stiften im Rahmen befestigen, geeignete Radlager mit passenden Achsen einsetzen, die Kippmulde auflegen und fertig ist das Modell.


Tipping truck for narrow-gauge railway without parking brake

The separate parts tipping trough, chassis, and bolts must cut off. You need some paint, apply the bolts, take some bearings and wheel sets, hang up the tipping trough and the model is ready.

3D Scan of Grandpa

Photo References can be downloaded here:
imageafter.com/temp/tristan/GrandPaReferences.zip

Accurate Edmontosaurus 1/144 scale

-BEST RESULTS is with White/Black Detail. more expensive, paintable. Detail is great!  Black Detail is best.
- White Strong and Flexible is cheap and paintable. Detail is pretty good.
-Colored versions of Strong and Flexible vary in quality.  

USS Neosho (AO-23) naval miniature ship, scale model 1:1800, tanker
USS Neosho was a Cimarron-class fleet oiler serving with the United States Navy, Launched on 29 April 1939. When the Japanese raided Pearl Harbor on 7 December 1941, Neosho was docked in the "Battleship Row" attack area, but escaped with slight damage.
She was lost to enemy action at the Battle of the Coral Sea, fatally damaged by enemy air attack, 7 May 1942.

Displacement: 25,230 t

Complement: 304

Brave little defender of the Jovian Alliance Navy.

This Water Still is designed for 28mm gaming. In a post apocalyptic future there is little more important that potable water. This makes a gangs water still a high priority target for rival gangs. suggestions and critiques are welcome and appreciated. The Pipes are slightly thicker than in my painted print. Shapeways made me thicken them up after I had printed it.

1:220 scale (Z scale)

For LGThek's chassis.  Please refer to http://www.zcentralstation.com/index.php?option=com_kunena&Itemid=0&func=view&catid=33&id=10914 for full story and links.

It's similiar to a GS1 switcher, with a few tweaks/differences, hence the name Rebel.

Note: July 1, 2011: handrails thickened up a bit to help survive cleaning and shipping.

A dodecahedron with open faces. Modeled in SolidWorks.