A chunk of our spawn area in Vokselia, done as a test. This is the absolute largest (at least in X and Z - the height limit is 7.8 inches high) that you can print in color, it's as large as the ZPrinter 650 printer can go. I was surprised, I thought the cost would be in the thousands, but it's "just" $633.14. The area here is 190 x 125 blocks, 2 mm wide. If you are sure you have no thin objects (tree trunks are particularly bad, they'll snap right off), you could go down to 1 mm. That's the scale of the model shown here: http://www.flickr.com/photos/postapocalyptic/6606221371/in/pool-1862849@N21/

 HOn30 3ft 9in wheelbase archbar freight trucks (bogies)

24 off sufficient for 12 cars 

Work with Atlas N gauge 36" wheels or Fox Valley replacements. 

To purchase these, and other jewelry with gift box, please go to: http://improbablecog.etsy.com

This is part 1 of a snap-fit puzzle machine.  When you turn the knob, it generates fun!

---

Here's all the parts:
+ + + + +

---

There's a bigger and fancier version here.

CBot-01 is the first in the Improbablecog art toy line. Stay tuned for more CBots, and other figures, soon to come!

This ballista will easily launch a U.S. Penny across a cubicle farm, but most people use it to play Seej.

Seej is an Open Source tabletop wargame based around 3D printing. Rules and more information are available at www.s33j.net

If you'd like start playing Seej, there's a Seej Starter Set available on Shapeways, too. You'll need some extra bloxen", or possibly a whole lotta bloxen to really make a go of it. You'll want some flags, too. Construction is really simple! Needlenose pliers are recommended, but not strictly necessary.

You'll need two elastic bands to complete this ballista. Tie a single band through the bore on one of the two D-shaped locking keys. Repeat the process with the other locking key.

Feed the end of one band through the rectangular bore on the ballista's left post. Insert the tenons of the locking key into the square mortises on the post to lock the band in place. You'll be tempted to repeat the process with the other side, but don't give in. It will save you precious minutes of frustration.

Unlike the Zheng3 Penny Catapult, these locking keys should be a snug fit. If some settling of the plastic during printing has made the mortises too small, trim the tenons a bit with your blade of choice.

Center the nock on the knot that connects the two rubber bands. Make sure that the penny's cradle is facing forward.

Feed the end of the band that's been locked down through the rectangular bore on the nock. Tie the free end of the band to the second band. Now feed the free end of the second band through the outside of the rectangular bore on the right post and loop it through the second locking key.

The nock has a wee nub on its underside. Slide this nub into the ballista's firing groove; it will improve accuracy.

Load a penny into the nock, pull it back, and fire away. Be safe! Wear eye protection!

Be sure to check Zheng3.com for updates, or follow Zheng3 on Twitter.

This is part 2 of a snap-fit puzzle machine.  When you turn the knob, it generates fun!

---

Here's all the parts:
+ + + + +

---

There's a bigger and fancier version here.

 Now with roof !

Note this is quite a small industrial sized Loco  -  body is 75mm long 35mm wide and 57mm high 

If you buy this please note it was meant to fit the Hornby 0-4-0 chassis but the changes needed to the chassis have proved a bit too drastic.

I'm trying to decide on another one to use at the moment so if you buy this you are on your own at the mo - sorry ! Be preparerd to have to do some work to get it to fit whatever you decide to use.

Any sugestions for an alternative chassis most welcome . 

a quick model of the hidden blade the Prowler uses in ACB Multiplayer

This model space ship strongly resembles the Concord Battleship in the computer game "EVE Online"
Note that I created this model myself, using only a screenshot for reference, so it isn't an exact match.

It comes without a stand, but it weighs only 3 grams and be could glued to your own stand, no problem.
I painted it with citadel paints from games workshop, but I suspect many other paints will work.

TRANSIT TROPHY RIM

Game piece, Second variation on Martian Tripod after first prototype proved to be to small for accurate use.

This is part 4 of a snap-fit puzzle machine.  When you turn the knob, it generates fun!

---

Here's all the parts:
+ + + + +

---

There's a bigger and fancier version here.

This is part 3 of a snap-fit puzzle machine.  When you turn the knob, it generates fun!

---

Here's all the parts:
+ + + + +

---

There's a bigger and fancier version here.

arc reactor inner details this piece connects to the base

Outboard Module -- 1/700 scale. 6 required. Other parts required: Command Module; Command Module Cap.

At New Spawn, the Admiral Benbow Inn has charmed visitors with its luxurious furnishing and its ability to keep them from getting killed by monsters. Built by Morgan in the Minecraft world Vokselia, then exported using the free Mineways program.

Antoine in shirt and tie.

Download reference photos here:
http://www.imageafter.com/temp/tristan/Antoinereferences.zip

This is a bust version of the Hana figurine (http://www.shapeways.com/model/164604/).
Altogether in one single piece.
Hollowed out inside, not colored.

Price includes shipping, see http://www.shapeways.com/support/shipping

Mast antenna -- 1/700 scale. 5 required. Mounts to Antenna Base.