Discover » Miniatures » SciFi
by
Kitty
simpliefied version of the runabout for small scale purposes.
white detailed is preferred.
Other materials might not be detailed enough.
white detailed is preferred.
Other materials might not be detailed enough.
by
hdrop
Mech Silver Skull Ring
A highly detailed skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
7 17.3 mm
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Note to the designer" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
A highly detailed skull ring with a mechanical twist.
Looks great in both silver and stainless steel.
The rings band is only around 1.5 mm thick for wearing comfort.
You can personalize the size of this ring by clicking the "personalize" button on the right.
Then choose the diameter that fits you.
US Ring Size Inside diameter
7 17.3 mm
8 18.1 mm
9 19.0 mm
10 19.8 mm
10 1/4 20 mm
11 20.6 mm
12 21.4 mm
You can order any US ring size between 8 and 12. Please specify the size you want in the "Note to the designer" field. I need both the US ring size and the inner ring diameter in millimeters. Please order larger sizes here.
Check out my other skull ring designs!
by
Ki_Ryn
A rugged transport suitable for a crew of 2 to 6.
This first ship is a test to see if it is feasible to turn my Future Armada line of starships & deckplans Future Armada ships into miniatures. It has a hole in the bottom to fit a standard 1/8th inch stand.
Renderings, deckplans, and interior descriptions of the ship are all available for sale at places like RPGNow. Demo documents and sample art can be found at 0-hr.com.
Note that the model is 5cm long rather than the 4.4 reported by Shapeways. I recommend Black Detail material for this model.
This first ship is a test to see if it is feasible to turn my Future Armada line of starships & deckplans Future Armada ships into miniatures. It has a hole in the bottom to fit a standard 1/8th inch stand.
Renderings, deckplans, and interior descriptions of the ship are all available for sale at places like RPGNow. Demo documents and sample art can be found at 0-hr.com.
Note that the model is 5cm long rather than the 4.4 reported by Shapeways. I recommend Black Detail material for this model.
by
coines23
The Belt's largest warship, this carrier is built for long range independent operations.
by
TOPO
This is the "typical Senator Shuttle" that can be seen on any Space Opera dogfighting game. The Model doesn't include the base, but it has the proper hole to use anything for basing, and have space saving holes below to make it cheaper (less plastic used). The Shuttle is a 3.3 inch long (8,5 cm) so it will fit perfectly the scale of your other starfighters!! THIS MODEL IS VERSION 2. WHICH MEANS IT HAS IMPROVEMENTS, Overall volume has been reduced about 35%-40% to make it cheaper but yet being 5cm longer!, and the model is far much closer to the shape it should be, with better details and better looking.
by
coines23
An orbital commerce hub, transferring goods between outer space and the world below.
by
Automaster
AVAILABLE NOW!!
Here is Seeker Missile 2.0. Designed to be more in scale with your Seeker's arm than the store bought clunky ones, and it has added detail. This gives you, the fan, the choice of weapon length for your Seeker Army.
For smoothest results order in White Strong & Flexible Polished. Perfect for Classics/Henkei/Universe/Generations Starscream, Skywarp, Thundercracker, Ramjet, Dirge, Thrust, and Acid Storm.
I've personally designed these missiles for your Seeker army. These are sleek and lean compared to the clunky store bought versions. Looks great printed in white, black, or gray strong & flexible. For a super smooth store-like finish order in White, Strong & Flexible Polished and paint accordingly.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better products.
Here is Seeker Missile 2.0. Designed to be more in scale with your Seeker's arm than the store bought clunky ones, and it has added detail. This gives you, the fan, the choice of weapon length for your Seeker Army.
For smoothest results order in White Strong & Flexible Polished. Perfect for Classics/Henkei/Universe/Generations Starscream, Skywarp, Thundercracker, Ramjet, Dirge, Thrust, and Acid Storm.
I've personally designed these missiles for your Seeker army. These are sleek and lean compared to the clunky store bought versions. Looks great printed in white, black, or gray strong & flexible. For a super smooth store-like finish order in White, Strong & Flexible Polished and paint accordingly.
If you've ordered my products and are really happy with them, please take a minute to leave me feedback at tfw2005.com:
http://www.tfw2005.com/boards/commissioner-listing-feedback/476321-automaster-customs-shapeways-tf-accessories.html
I appreciate your business and your feedback will help me make more and better products.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
In future, may thin the walls or release larger sets.
I'm not just a die hard Star Marine player, I also have a long revivified collection of robot corpses. To celebrate their new model line I tossed these together to replace their horrible green plastic rods. these are scaled the same as the old rods but bare the design marks of the new molded plastic guns. They are done up in a set of 20. A future release might be much larger if people have interest in more of them.
by
coines23
Agile, stalwart defender of the Martian Elite Republican Guard.
by
jayfisher
A detailed full color model of each of the planets, gas giants, and major moons of the Solar system, to (logrithmic) scale.
This set includes the 20 largest objects in the solar system (bar the sun).
All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 25mm (1 inch) diameter, and Earth is 12.76mm (1/2 inch) diameter.
(A photograph of some of the planet models can be seen on th page for this subset of planets. Photos of this full set coming soon.)
This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.
The set contains all planets, a dwarf planet, and eleven moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
- Moon / Luna
Mars
Jupiter
- Ganymede
- Callisto*
- Io
- Europa (attempt no landing there)
Saturn
- rings of Saturn
- Titan
- Rhea*
- Iapetus*
- Dione*
Neptune
- Tritan**
Uranus
- Titania*
Pluto**
All objects have a 1.6mm (1/16th inch) hole at the south pole, for a brass axle (or a toothpick).
What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.
In areas where the model surface is more detailed than the most detailed NASA photography (such as Pluto), the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)
*Due to hard limitations of the Shapeways production, these minor moons are sharing the same surface map. They were chosen because they have a similar surface, and/or their surface is largely unknown.
**For the same reason, Pluto and Triton, which have a similar icy surface and not much photographic detail known, also share their surface map.
(The alternative was to not include those moons)
This set includes the 20 largest objects in the solar system (bar the sun).
All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 25mm (1 inch) diameter, and Earth is 12.76mm (1/2 inch) diameter.
(A photograph of some of the planet models can be seen on th page for this subset of planets. Photos of this full set coming soon.)
This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.
The set contains all planets, a dwarf planet, and eleven moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
- Moon / Luna
Mars
Jupiter
- Ganymede
- Callisto*
- Io
- Europa (attempt no landing there)
Saturn
- rings of Saturn
- Titan
- Rhea*
- Iapetus*
- Dione*
Neptune
- Tritan**
Uranus
- Titania*
Pluto**
All objects have a 1.6mm (1/16th inch) hole at the south pole, for a brass axle (or a toothpick).
What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.
In areas where the model surface is more detailed than the most detailed NASA photography (such as Pluto), the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)
*Due to hard limitations of the Shapeways production, these minor moons are sharing the same surface map. They were chosen because they have a similar surface, and/or their surface is largely unknown.
**For the same reason, Pluto and Triton, which have a similar icy surface and not much photographic detail known, also share their surface map.
(The alternative was to not include those moons)
by
coines23
A quick and dirty combat modification for a standard asteroid mining ship.
by
coines23
The Murustan Space Force's heavily stylized patrol cruiser, built to resemble their world's fiercest predators.
by
dynath
I've been a bit depressed that the tank i've been working on is to pricy to produce. But I got to thinking there is no reason why I couldn't make some other kind of vehicle I've always wanted to see on the table top. Well here we have my MK2 grav cycle. Its designed to fit in with existing bikes but be unique enough to stand out. I've scaled it to fit traditional "marines" Its price actually fell right where I expected it to, right near the cost of "Official" bikes. In future I'll have thin it down a bit to lower that cost and make a set of riding legs and arms for it so the Scythes of the Emperor can patrol in style. enjoy.
by
coines23
A fast, lightly armed and armored mecha well suited to recon and patrol missions.
by
Kitty
The inner workings for F-toys AT-AT scale 1:144 foot.
material, white or black detail
requires removing inside support and toes from original model
The pivotrods (0.5mm diameter brass recommended) are not included
this is just 1 foot, you need 4 of them
material, white or black detail
requires removing inside support and toes from original model
The pivotrods (0.5mm diameter brass recommended) are not included
this is just 1 foot, you need 4 of them
by
Drawn-SteelHero
Powerful hand-held acid blaster rifle converts into a 56mm robot action figure with 9 points of articulation.
Gun mode comes with a choice of three handles, any of which can be glued in to the mounting point on the figure's back.
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.
Newly redesigned hands are able to hold or clip onto any 3mm diameter rod.
A new hinge design means this figure is now available to be printed in the Detail materials as well as WSF. However, WSF Polished is recommended for the best combination of durability and smoothness.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions coming soon...
Gun mode comes with a choice of three handles, any of which can be glued in to the mounting point on the figure's back.
Option 1 is a standard 5mm post, which is compatible with any figure bearing a 5mm peg hole.
Option 2 is a modified version of the post, which can still be used by figures with 5mm peg holes, but also has a built-in clip which allows it to clip onto any 3mm diameter rail.
Option 3 is a two-stage post, which like Option 1, can fit into any 5mm peg hole, but also has a narrowed end allowing it to be used by figures with 4mm diameter peg holes.
Newly redesigned hands are able to hold or clip onto any 3mm diameter rod.
A new hinge design means this figure is now available to be printed in the Detail materials as well as WSF. However, WSF Polished is recommended for the best combination of durability and smoothness.
Supplied as a 14-piece kit. Finishing (painting/dyeing) required, alternatively can be purchased in one of the available pre-dyed colours.
Assembly instructions coming soon...
by
Redshift
An original Transformers design, featuring six ball-jointed points of articulation, and a transformation into a weapon mode complete with a 5mm post for compatibility with many Transformers figures.
Weapon mode features an armor-rending chainsaw, a new approach to the traditional Targetmaster
Weapon mode features an armor-rending chainsaw, a new approach to the traditional Targetmaster
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
In future a shelled version for printing in FUD.
This is a series of Armor plates with a decorative patern. theres no real rim or reason for them. I made them so I can apply them to fantasy figures to make them a bit more scifi. Each plate is about 2.5mm thick and 5mm wide. Some curring and sanding will be required to fit them on a figure. Loosely speaking there is a a plate for upper and lower legs and arms, chest and waist. Enjoy.
by
coines23
Glorious backbone of the mighty Martian Elite Republican Guard.
by
Redshift
An original Transformers design, featuring six ball-jointed points of articulation, and a transformation into a weapon mode complete with a 5mm post for compatiblity with many Transformers figures.
Same chassis as my Jigsaw robot, only with a double shotgun instead of a chainsaw
Same chassis as my Jigsaw robot, only with a double shotgun instead of a chainsaw
by
Mid7night
Model based on a frigate from Halo. I make NO profit from this model; the cost you pay is Shapeways' material and shipping only.
