1:220
Open Windows available as separate model.

This is an H0e scale model of a German narrow gauge railway snow plow.
The original will be moved by a steam or diesel engine. So you only need 2 jeweled gear sets and 4 metallic bushings, wire for handrails, some paint, plastic windows and after a few hours the snow plow is ready to go.

H0e Schmalspur Schneepflug.
Das Original wird geschoben durch Dampf- oder Dieselloks. So benötigen sie nur noch 2 spitzengelagerte Radsätze, 4 Metallbuchsen, Draht für die Griffstangen, etwas Farbe, Kunststofffenster und schon nach einigen Stunden ist Ihr Modell einsatzbereit.

This is a H0e scale model of an OeBB Schmalspur Draisine, this is a body only and requires couplings, wheels, gears and motor etc to produce a working model.

1:220 Load for FlatCar

Set of twelve American-style mailboxes.

1:220 In two parts - Bucket is hinged
Open Windows available as separate model.

De centraal bediende treinaanwijzer (afgekort CTA) is een paneel dat in Nederland vaak op stations boven de perrons hangt vanwaar reizigerstreinen vertrekken, en daarmee een van de vormen van dienstregelinginformatie over treinen in Nederland.

100mm*42mm*43mm

This is a 0f scale (12mm) model of a German narrow-gauge track system (600mm).
As drive mechanism you shout take a self construction or a modified industrial bogie (for example Varioantrieb from Halling GmbH). So you only need wire for handrails, some paint, plastic windows and your model is ready to go.
 
Ein Spur 0f Feldbahn Modell (12mm Spurweite)
Als Antrieb kann man einen Eigenbau einsetzen oder einen umgebauten industriellen Antrieb (z.B. Varioantrieb, Halling GmbH) verwenden. So benötigen sie nur noch Draht für Griffstangen, etwas Farbe, Kunststofffenster und ihr Modell ist fertig.

Tank zum Nachrüsten des Brekina Modell B1000 Pritsche, M 1/87

Koeievanger voor Minitrix Koploper

Ein Eimerkettenbagger, gebaut von der Firma Willy Ertmer in Ludwigshafen, wie er zum Beispiel bei der Museums-Feldbahn Leipzig-Lindenau noch im Einsatz ist. A bucket excavator, built from Ertmer in Ludwigshafen, for example in use by “Museums-Feldbahn Leipzig-Lindenau”.

Fowler Plough Engine BodyPart Number: 1000-0
Scale: 1:87 (HO, HOn3)
Recommended Colour: Black

Associated Parts
• 1000-1: Fowler Plough Engine Wheels
• 1000-2: Tilt Plough (Plow)

Description
Highly detailed HO scale traction engine body. Prototype is a Fowler Plough Engine. Front axle is positionable.

As the original Chassis this was designed for is no longer available I've modified the design slightly. It will now fit on a Bandai 4w shorty B chassis 1 - This needs to be shortened to 39.5 mm long by cutting both ends off.

Akkuschlepper TT is a accumulator tractor in scale TT. This vehicle works in railway depots in Germany (DR).

Gehäuse Akkuschleppfahrzeug (ASF) der Deutschen Reichsbahn in Spur TT.

Used to enhance the acoustics of a live band performance and protect band members from weather conditions, bandstands can be found all around the world in city parks or other public gathering places. The design of the American Archetype bandstand is based on the combination of several prototypes, including bandstands in New Orleans, LA, Boston, MA, Providence, RI and Pawtucket, RI. Its general style follows bandstands that were designed in the early 1900s–most of which are still in use today. Instruction sheet available at http://www.AmericanArchetypeModels.com

The Fairbanks-Morse H-10-44, first introduced in 1944, represents one of the classic early switch locomotives. Easily identified by its smooth Raymond Loewy-design features, almost 200 were eventually produced and several survive to this day. This N-Scale (1:160) locomotive shell is designed to allow for the conversion of an Atlas Baldwin VO-1000 into a FM H-10-44. The shell itself is fully assembled while the handrails (as well as extra stanchions) are included on a separate sprue. No modification to the mechanism should be required beyond the removal of the existing Atlas shell. While pilot holes for the handrails are designed into the shell, they should be drilled out before final assembly. A cab interior is also included; in order to fit it however, the locomotive's "rear facing" LED will need to be either removed or relocated. As with all Frosted Ultra Detail (FUD) models, cleaning, painting and decaling are required to complete the locomotive. Sanding with fine-grit sandpaper is also recommended on the accessible flat surfaces.

The dimensions of this loco are "7.9 l x 2.9 w x 4.1 h" in cm.

This locomotive fits over a Graham Farish Class 08 N scale mechanism.
Dimples are added to locate the positions of the handrail stanchions and front and rear horn clusters.
Slots are provided for fitting microtrain couplers.

The decal sheet for this model can be downloaded in the following link:
http://www.shapeways.com/forum/index.php?t=msg&goto=50296msg_50296

ÖBB 2068 in 1:160, alles drin was Sie benötigen, Fräsarbeiten am Fahrwerk der 290 nötig! Diese Version ist nicht ganz Masstäblich, passt aber ohne nacharbeiten auf das Fahrwerk der roco 290/V90.

Deutsche Schmalspurlokomotive der Harzer-Schmalspur-Bahnen in TTm German narrow gauge steam engine in TTm scale (1:120)

Akkuschlepper H0 is a accumulator tractor in scale H0. This vehicle works in railway depots in Germany (DR).

Gehäuse Akkuschleppfahrzeug (ASF) der Deutschen Reichsbahn in Spur H0.