As the original Chassis this was designed for is no longer available I've modified the design slightly. It will now fit on a Bandai 4w shorty B chassis 1 - This needs to be shortened to 39.5 mm long by cutting both ends off.

 Now with roof !

Note this is quite a small industrial sized Loco  -  body is 75mm long 35mm wide and 57mm high 

If you buy this please note it was meant to fit the Hornby 0-4-0 chassis but the changes needed to the chassis have proved a bit too drastic.

I'm trying to decide on another one to use at the moment so if you buy this you are on your own at the mo - sorry ! Be preparerd to have to do some work to get it to fit whatever you decide to use.

Any sugestions for an alternative chassis most welcome . 

 On30 Boxcab loco 

Smaller version , Better size to run with Chivers stock and the like

Takes Ho switcher chassis

Lantern for footpath in Z scale (1/220). A small 0402 LED can be fitted to light the lantern. Read the build instructions on my homepage for more information. I am currently working on a revised version, the original version was too fragile in print.

A n-scale bi-foudre wine tank wagon.
It is designed to be used with Peco chassis NR-123 (4-5 $ USD)

This is a pole for traffic lights, traffic signs like my zebra-crossing or for street lanterns. It is designed for Z scale (1:220) as a 6m high and 6m long pole. It is hollow in the middle so that you can hide the cabling to the signs inside. This model is quite fragile and needs a lot of post-processing to clean out the support wax from the cable channel. Read the build instructions on my home page.

A Z scale (1:220) model for a zebra crossing sign hanging above the street. It is designed for 2 small 0402 LEDs, a yellow one to light the street below the sign and a white one for the sign itself. To complete this model you also need a pole, available as another model. Read the build instructions on my home page.

Fahrwerk der E1082-001, Version 2010

A n-scale bi-foudre wine tank wagon WITHOUT gate.
It is designed to be used with Peco chassis NR-123 (4-5 $ USD)

Swiss Federal Railway: SBB #14101, Ce 6/6, H0 scale, shell parts

A 1:64 scale tunnel portal, based on NZR plan 10-229. For Sn3.5 NZR modelers.

A few parts for the BKB... Diverse Kleinteile (Fensterrahmen Faller-C4, Pufferbohle, Henschel-Stern, GGw-Türen) für die Fahrzeuge der Bürener Kreisbahn, Maßstab 1:45.

Untertasse in Form eines Mittelpuffers, sollte für Espresso-Tassen mit 52mm Bodendurchmesser (z.B. CreaTable "Basic") passen. Habe selbst noch keine Untertasse drucken lassen - Bestellung daher ausdrücklich auf eigene Gefahr. Rückmeldungen sind willkommen.

Drain pipe 90 degree bend for Gauge O (1:43 scale) model buildings. Pack includes 6 bends in clear plastic. Degrease carefully before painting.