4 machine guns PTRS 1941 Russian World war II army Already painted

Everything has been tested in WSF, the hands require the use of a paperclip as a pin for the finger hinges

This is the basic kit for upgrading your Kreon minifigures. The kit includes arm and hand extensions as well as knee, shin and foot extensions/upgrades. It upgrades your Kreons into full on action figures with increased articulation. The parts are designed to be compatible with any major brick sets so you can build onto the parts to give your Kreons a really unique look or add additional parts to allow them to transform :D

This set includes:
1 Kreon upgrade - Arm Kit
1 Kreon upgrade - Leg Kit $if you plan on ordering multiple items of mine, contact me first and I can group them into a single order to save you a few dollars.$

This version is pretty strong, considering it's very small size. Part of the strength comes because I moved up the wrist, holding the gun, until it touched the teeth, to give the gun hand more rigidity. It should only be printed in "White, Strong & Flexible" due to it's small size and fragility.

Cora (feral state), Fugue, Bethrynna, Rave, and Hakeem. D&D minis for personal use. Based mostly on DAZ Studio models assembled & posed by Davyd Atwood; Rave built from scratch starting from Makehuman. Clothed and sculpted in Blender.

You can play with your own Guybrush threepwood voodoo doll! The doll cannot stand on it's feet(it's a doll!) But his feet are flat so if you lean him against something he should stay put! Colored sandstone is fragile, so handle with care. Huh I'm mean curse that bloody pirate!

Available in every size between 12.5 and 22.5 mm (inside diameter).
Choose Silver Glossy for best result and most details.
Find your ringsize here:
findmyringsize.com
en.wikipedia.org/wiki/Ring_size

Designed to sit on monitors, desks, books, windows, and anything with a 90* angle! Let this little Robo-01 liven up your work area or dorm room. Chillin' to its own beat, Robo-01 encourages you to relax and turn the volume up. This is the first in a series of Desktop Buddies, please check back every now and then for more characters.

If you would like this statuette in a different size, or in full color (please give some specifications), I can customize it for you. My e-mail is c.wilmer@gmail.com.

(Modeled in Blender. Rendered in Luxrender.)

It's a Zombie Santa Claus Christmas tree ornament! I haven't been able to find any in stores, and it seems mind-numbingly obvious that this is what people really want on their tree. A limited time offer, this model is available THIS YEAR ONLY. A perfect, unique gift for zombie and tech enthusiasts. Digitally sculpted from scratch, this is not a modification of any existing design. Sculptor: Justin Cissell.

This set has been tested in WSF

This set includes all of the parts from the Bruiser set as well as additional parts to transform your Kreon minifigure into Omega Supreme and rain holy wrath upon any 'Cons that might get in your way. All the required parts have been included in this set, all you need is the Kreon minifigure.

All of the parts from this set can be reconstructed into Omega Supreme's alt mode of a rocket ship with a launch pad/control tower, and a track with a little tank.

Be sure to add the replacement visor linked below to your order if you want your Omega to have a transparent visor instead of the solid one included in the kit.

• Kreon upgrade - Bruiser Kit
• Transparent replacement visor for Omega Helmet

$if you plan on ordering multiple items of mine, contact me first and I can group them into a single order to save you a few dollars.$

If you like a little fembot action in your toy collection, this Tempest Add-on Kit is for you!! Tempest is a savvy seductress of the Viacon resistance. She is a charter member of an elite counter-intelligence group known as the "Femacons." As a deep cover clandestine operative, she is charged with the task of attaining vital information from the Tecrom inner circle by "any" means necessary. Her motto, "I always get what I want and sometimes I leave them wanting more."(Picture shown was printed in Frosted Ultra Detail) Only a print of the digital model is included-all other items sold separately. Toy is fully transformable with Tempest head attached. The first two pictures above show the unpainted Tempest set in the "Frosted Ultra Detail" material available on Shapeways and how it can be used with the RID Transformers Prime Arcee toy. The toy and the Tempest set, "DO NOT" require any modifications for the toy to transform with the set attached. The ball joint on the head's base will allow it to easily pop on to the toy after the original head is carefully removed.The third images shows an artist's paint applications to enhance the look of the set on the toy.

Maybe just a good Yithian. Well, he's alright. This particular one is kinda a jerk.

A member of the Great Race of Yith, from Lovecraft's writings. To scale with most gaming miniatues. 2.5" or 20 approximately 20 feet in height. The base is hollowed to reduce cost, and has a single 2.5mm round escape hole on the bottom that is easily plugged or filled.

I highly recommend Black Detail if you're going to paint this up, the texture is far superior and all the limbs should be more than thick enough to avoid breakage. (the thinnest point, just behind the claw, is about 2mm thick)

If you have interest in a larger version, just let me know and I'll create a scaled up model. It will need to be at least 50% larger to accomdate printing in metal or glass.

A pair of Ragged Wings for a flying monstrous creature. Almost 12cm from tip to tip, with simple ball joints compatible with most large fantasy or sci-fi miniature creatures. Intended for large creatures in 25mm miniature games, such as Warhammer or Warmachine.

Designed to match the full creature located here: http://www.shapeways.com/model/219905/flying_alien_monster.html?gid=ug71173

Used on the Generations Read Alert body, it can act as a chest piece for the robot mode. In vehicle mode, it mounts where the turbine engine did and allows the Chromehead weapons to be mounted on the vehicle. Once opened, it can also act for a seat for the G2P-005a Chromehead mini-figure.

This is Jana, a teleported teddy.
She just got 3D-Scanned, poly-abused and texturized.

 

Jana | and the Urchin Affair

Spike filled Jana, like one of those lovely echinoidea drawn by Ernst Haeckel at the Kunstformen der Natur

 

---

 

Jana is 1.5in tall (38mm); perfect for sitting on your desk watching you surf the interwebs.
She is cool, just take some photos every now and then, and she'll be happy.
Jana loves music, loud and noisy if possible.

 

3D-Printed in full color, a very nice material with a sandstone finishing,
Get some of them, and they'll entertain themselves.

 

Jana Collection | Jana @cunicode +info & Photos

This is a 4 pack of female stealth gang members. They all have shaved heads, goggles and trench coats. They carry automatic pistols. Their height is actually 31mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.

Altogether in one single piece, present box can be opened.
Scale 1/20, about 8.25cm height.

Makes for some nice light effects with your christmas tree lights if you order it in Transparent Detail (as in picture).

Full scale colored figure also available at http://www.shapeways.com/model/190101/

Look at my shop i got so many models !


Dog is a robot, built by Eli Vance to protect his daughter Alyx as a child. Dog's original model was around one meter in height, but as Alyx grew older, she began adding upgrades and new parts to Dog, and he towers around 2.5 meters tall at the time of Half-Life 2.

Here is a big desktop version full detailed from the game with nothing added to his body, just a lot of thickness adjustment.

Griffon time! Here's the Owl Griffon. It's totally pose-able with joints everywhere where you'd expect joints to be (ball and dovetail) so you can pose it however you like. It's plastic, though it does require super glue, rather than plastic glue, to stick. In this pic I've constructed it in a rampant pose, but any pose is achievable. It comes with an extra set of flat talons so you can have it on all fours.... Or on 3 with one clawing. The vid in the sidebar shows its scale. It doesn't come with a base as 3d printing is expensive and priced by the amount of material used and using "fine detail material" for bases would escalate the price for something simple. I'm currently building some bases in the far cheaper material "strong white and flexible" which is more prudent for you and I. But until then i suggest making a base out of plasticard or using a base from your war-game of choice.

A high powered plasma pistol. Fits 1/6 scale hands.

Polygon Count : 460,000 Triangles

Handle Measurements : 

Length = 1.5 cm
Width = 0.7 cm
Thickness = 0.5 cm

*Version 1 Update - Added trigger.