Discover » Maker/DIY
by
IHeartEngineering
This ia a modular case for the Arduino Microcontroller. It has been designed to fit 6 across in a 1U Rack with a little room to spare. M3 Screws are suggested and not included. The holes have not been drilled or tapped, so you can use #4-40 screws as well.
by
ICU
Now V2.5.1!
There was an occasional failure to print, approx 1 out of every 8 were rejected for thin walls. The problem has been fixed.
Do you love your UMX Sbach, but are tired of breaking those flimsy, profile OEM foam Wheel Pants? Upgrade to these scale, virtually indestructable Wheel Pants.
These wheel pants have been designed to work with the OEM, wire landing gear and wheels.
Due to the 3D printing process, some holes will need to be "cleaned out" with a drill bit. Don't worry! The holes are there, there is just some residual material left in the holes from the process of creating these. I recommend using both a 1.25mm & 1.0mm drill bits and a hobby knife.
I am currently only offering these in the White, Strong, Flexible Material and all it's varieties. For more information on this amazing material and process can be found here, www.shapeways.com/materials/white_strong_flexible. Also check out all the other materials that are now possible using 3D printing, www.shapeways.com/materials/.
***Recomended items for the best fit***
1pc. - OEM wire landing gear
2pc. - OEM foam wheels
1.0 & 1.25mm drill bits
Hobby Knife
A length of fishing line (for an extra measure of security)
******I will update soon with a link on the installation process.******
There was an occasional failure to print, approx 1 out of every 8 were rejected for thin walls. The problem has been fixed.
Do you love your UMX Sbach, but are tired of breaking those flimsy, profile OEM foam Wheel Pants? Upgrade to these scale, virtually indestructable Wheel Pants.
These wheel pants have been designed to work with the OEM, wire landing gear and wheels.
Due to the 3D printing process, some holes will need to be "cleaned out" with a drill bit. Don't worry! The holes are there, there is just some residual material left in the holes from the process of creating these. I recommend using both a 1.25mm & 1.0mm drill bits and a hobby knife.
I am currently only offering these in the White, Strong, Flexible Material and all it's varieties. For more information on this amazing material and process can be found here, www.shapeways.com/materials/white_strong_flexible. Also check out all the other materials that are now possible using 3D printing, www.shapeways.com/materials/.
***Recomended items for the best fit***
1pc. - OEM wire landing gear
2pc. - OEM foam wheels
1.0 & 1.25mm drill bits
Hobby Knife
A length of fishing line (for an extra measure of security)
******I will update soon with a link on the installation process.******
by
K&T
A compact 90 degree elbow mount compatible with other GoPro Accessories. This mount allows you to attach the GoPro Camera very tight to a vertical surface.
by
inthompx
These little bits are the main links in an N64 joystick. They are also the parts that wear out and cause your joystick to go floppy. Why try to find a good controller at some re-sale shop when you can repair it yourself for half the price.
by
IHeartEngineering
The part allows you to mount the Parallax Ping))) sensor on the Hitec HS-325HB Servo. It has been optimized for Shapeways printing with the Grey Robust material.
The activity light and connector pin outs are visible.
This part will require drilling and fasteners. Two M3x5mm and two M2x6mm screws are suggested. If you don''t have the necessary taps you can use nuts.
YouTube assembly Video is available here. http://www.youtube.com/watch?v=h5oXFVhrQr8
The activity light and connector pin outs are visible.
This part will require drilling and fasteners. Two M3x5mm and two M2x6mm screws are suggested. If you don''t have the necessary taps you can use nuts.
YouTube assembly Video is available here. http://www.youtube.com/watch?v=h5oXFVhrQr8
by
jasolo
Warning: this is an old but functional version. Check the newer version at:
http://www.shapeways.com/model/146656/universal_ring_dial_2.html
This Universal Equinoctial Ring Dial is a portable and self-orientating sundial. You can see how a similar dial works: http://www.sunwatchmaker.com/instructions.php .
You''ll get in position the meridian ring, the equatorial ring and the central bar. The eyelet must be inserted through the "jasolo fecit" part of the meridian ring. The slider is entered through the slit of the central bar and then it is turned with a little force.
For finishing, dip the model a couple of hours in cold tea (hot or warm tea will deform the model). Later, paint with black ink the marks and once dried, remove the ink with a wet tissue (ink will remain on the marks).
http://www.shapeways.com/model/146656/universal_ring_dial_2.html
This Universal Equinoctial Ring Dial is a portable and self-orientating sundial. You can see how a similar dial works: http://www.sunwatchmaker.com/instructions.php .
You''ll get in position the meridian ring, the equatorial ring and the central bar. The eyelet must be inserted through the "jasolo fecit" part of the meridian ring. The slider is entered through the slit of the central bar and then it is turned with a little force.
For finishing, dip the model a couple of hours in cold tea (hot or warm tea will deform the model). Later, paint with black ink the marks and once dried, remove the ink with a wet tissue (ink will remain on the marks).
by
simensays
Simensays Foldable Landing Gear Kit
for the DJI Phantom. A smart, modular design that can be folded up in seconds without the need for any tools, any length for the leg extensions (height of the Phantom) for the gimbal of choose or any additional fear you might be mounting.Easy to assemble and light weight (the parts in the kit weighs 33 grams), yet strong and very stable. Check out this assembly video for how to put it all together. This kit includes the white parts you see in the pictures, and you provide the carbon fibre tubing yourself (list & links below). I recommend making a small 2.5mm hole on each side of the battery trey, as seen in the video, to mount the 3rd screw, that secures a strong mount for the landing gear. Tap out the hole, using a 3mm screw before mounting it all. I also used a M3 lock nut on the inside for optimal strength.
Parts needed
Carbon Tubes
Most finer hobby shops have carbon fibre tube in these dimensions. I ordered the carbon fibre tubing from eBay (links below):Materials
I recommend White Strong & Flexible Polished. To make the parts stay clean and a fresh white, I recommend spray them with a coat of white paint. I used cheap automotive spray can, and it looks great.Videos of more mods to my Phantom
Check out my website www.simensays.com for more pics & videos of mods I have made to my Phantom.Disclaimer
This is a DIY kit, so some minor adjustments might be needed.
by
Ammnra
Assembly Video
NOTE: This is a kit to build a toy replica inspired by the Hidden Blade from Assassin's Creed 3. This kit is designed specifically as a con-safe cosplay prop. The end of the prop is squared-off and blunt and is therefore in no way intended to create a potentially dangerous weapon. Any modification to the design as sold is outside the recommendation and responsibility of the creator and manufacturer of this kit.
Modern style version of this kit Available Here
NOTE: This is a kit to build a toy replica inspired by the Hidden Blade from Assassin's Creed 3. This kit is designed specifically as a con-safe cosplay prop. The end of the prop is squared-off and blunt and is therefore in no way intended to create a potentially dangerous weapon. Any modification to the design as sold is outside the recommendation and responsibility of the creator and manufacturer of this kit.
Modern style version of this kit Available Here
by
Innovo
The ''ShapeTool'' Multitool is a practical keychain accessory, useful for everyday tasks such as letter/cardboard box opening, cutting, scraping, screwing or puncturing.
''Shapetool'' specifications:
Length: 7,9 cm / Height: 2,1 cm / Width: 0,35 cm / Blade Length: 3,6 cm / Weight: 23gr
Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy, Silver and Silver Glossy). Please choose from the right.
For safety reasons when carried in a pocket, a protective sheath is recommended and available here.
Note: The item you order may require cleaning of extra support material, polishing and sharpening. The item will be shipped unsharpened and the bladed side can be used as a scraper.
by
simensays
DJI Phantom Landing Gear Kit, includes the Leg Mounts, Compass Mount and 4 Leg Ends.
These mounts fit directly to your Phantom, using the stock screws, and replace your stock landing gear. You provide your own 6mm tubing (preferably carbon fibre or aluminium), cut to the desired length, to give you the height you want, in order to allow for dampening set ups/gimbals/bigger cameras and so on. I have found 5" tube to be an ideal length for my set up, with gimbal and GoPro.
Please note, that the tubing is not included in the listing, they are to show what the assembled kit looks like on the leg extensions. The kit includes 4 Leg Mounts, 1 Compass Mount and 4 Leg Ends.
These are a beefed up version of the previous Leg Mounts I made, and use in the video, showing how I made the set up on my Phantom.
Updated, so tubing can be pushed into the holes (which are slightly cones), and secured with a 3mm fixing screw (not included). The mounts are directional, like your props. see pictures above for reference or check out this video of how I assembled mine http://vimeo.com/simensays/phantom
This is a simple DIY mod that replaces the stock landing gear, allowing you to easily make your Phantom taller, more stable, save weight (depending on how long you want your legs and what type of tubing you use) and a better overall look and stance. Only basic tools are needed. I am setting up a blog on my website, where I will post info, videos etc on other mods I have done to my quad, including how to make the leg extensions. www.simensays.com
Beware to mount your Compass correctly, to maintain optimal flight characteristics on your Phantom. It should be mounted perpendicular to the body, in a vertical position. The included compass Mounts makes this very easy when using these legs. I use velcro on to fasten my compass.
These mounts fit directly to your Phantom, using the stock screws, and replace your stock landing gear. You provide your own 6mm tubing (preferably carbon fibre or aluminium), cut to the desired length, to give you the height you want, in order to allow for dampening set ups/gimbals/bigger cameras and so on. I have found 5" tube to be an ideal length for my set up, with gimbal and GoPro.
Please note, that the tubing is not included in the listing, they are to show what the assembled kit looks like on the leg extensions. The kit includes 4 Leg Mounts, 1 Compass Mount and 4 Leg Ends.
These are a beefed up version of the previous Leg Mounts I made, and use in the video, showing how I made the set up on my Phantom.
Updated, so tubing can be pushed into the holes (which are slightly cones), and secured with a 3mm fixing screw (not included). The mounts are directional, like your props. see pictures above for reference or check out this video of how I assembled mine http://vimeo.com/simensays/phantom
This is a simple DIY mod that replaces the stock landing gear, allowing you to easily make your Phantom taller, more stable, save weight (depending on how long you want your legs and what type of tubing you use) and a better overall look and stance. Only basic tools are needed. I am setting up a blog on my website, where I will post info, videos etc on other mods I have done to my quad, including how to make the leg extensions. www.simensays.com
Beware to mount your Compass correctly, to maintain optimal flight characteristics on your Phantom. It should be mounted perpendicular to the body, in a vertical position. The included compass Mounts makes this very easy when using these legs. I use velcro on to fasten my compass.
by
TomZ
This is the Multidodecahedron. A puzzle that has all the parts from the Megaminx, Pyraminx Crystal, Starminx, Master Pentultimate and Pentultimate and requires you to solve them simultaneously. This puzzle was initially suggested by Carl Hoff, who coined the name Multidodecahedron.
About ordering
To purchase a Multidodecahedron DIY kit, you should purchase this model and then must send me an email with your order number so I can give the necessary instructions to Shapeways. This kit comes with free stickers so please also include your mailing address so I can send them to you (note: I am currently not offering super stickers).This puzzle comes as a kit which you will need to assemble yourself. You will need to provide M3 screws and optional springs and or washers. You can also contact me directly to purchase a fully assembled and stickered copy of this puzzle.
by
singsing13
1/144 German Tank
follow websit address is Nr.3-5 Tank User Manual
http://blog.yahoo.com/_RH7WSCFM6MVHHACC7CWKWMA54M/articles/1163571/index
by
kkaukora
Main gearbox frame for the dual motor contra-rotating F3P power system.
Some of the photos show the frame with the two AP-03 brushless motors and the 3x6x2.5mm ball bearings for the inner shaft installed. However this item is obviously just the 3D printed frame. The motors are attached using 6pcs M1.4 self tapping screws. The bearings are a push fit, but can be secured with glue if desired.
Actual weight of the printed part is 2.47g (black strong and flexible)
For more info on the motor system, please see:
http://www.rcgroups.com/forums/showthread.php?t=1390240
by
K&T
This mount allows you to attach a GoPro camera to the skid of a model helicopter. It has been designed for an Align T-Rex 600 Pro, but in general it should fit any skid tube with a diameter of 9mm. The mount is engineered to allow the use of standard GoPro mounting hardware and accessories. Please keep in mind that since this is a fixed mount if you have vibrations in the heli they will translate into vibrations on the image.
The mount should be able to withstand basic acrobatic manoeuvres, but as you probably understand, I will not take responsibility for any loss... If you're looking for more robust mount, please checkout my 9mm Heavy Duty Camera Rig, found here
Also Check these out:
by
mdahlgren
Multitools seem to be following a trend of getting progressively larger and more complex. The Head Turner, on the other hand, is simple and down-to-earth. The name says it all: this tool is made to turn heads— bolts or otherwise.
Tools: 5mm wide Phillips screwdriver, 5mm wide flathead screwdriver, 5mm Allen key, 4mm Allen key, 10mm wrench.
by
madox
This is a working demonstration of a mechanical iris diaphragm.
WARNING :- Please note the tolerances are a bit tight and depending on print orientation it may require a bit of cleaning.
Will post photos and videos later.
Early Video :- http://www.youtube.com/watch?v=fLSfJjS7QUE
Better but short video :-
http://www.youtube.com/watch?v=GXf9ck0LAYo
WARNING :- Please note the tolerances are a bit tight and depending on print orientation it may require a bit of cleaning.
Will post photos and videos later.
Early Video :- http://www.youtube.com/watch?v=fLSfJjS7QUE
Better but short video :-
http://www.youtube.com/watch?v=GXf9ck0LAYo
by
EduardWinter
Replacement for PD06-0005
Material: PA2200
approx.weight: 20g (~50% weight cut)
Steering (L/R) is limited to 14° in either direction (28°overall)
WARNING: Requires 2x Bearing (d5xd13xb4)
Please keep in mind that these parts are PROTOTYPES.
Material: PA2200
approx.weight: 20g (~50% weight cut)
Steering (L/R) is limited to 14° in either direction (28°overall)
WARNING: Requires 2x Bearing (d5xd13xb4)
Please keep in mind that these parts are PROTOTYPES.
by
imperator
Moving a turbine without any interfering veins? Only using smooth discs and adhesion with the air? The Tesla Turbine, made by Nikola Tesla, was certainly a marvel in its time. But this is no ordinary Tesla Turbine, but a Perez - Tesla Turbine.
The Tesla Turbine was made to be simple and elegant. Pressurized air entered through the periphery, circled about, and spiraled out of the center exit. And as it did it adhered to the smooth discs inside, pulling them and affecting rotary motion. However, the air, which had been following such a graceful path, would make a hard 90 degree turn when it exited the discs. The Perez - Tesla Turbine, available here, extends Tesla's design by using trumpet shaped discs, instead of Tesla's flat discs. This allows for an even smoother transition of the working fluid throughout the engine.
The axle mount for the turbine contains a fixture so that it can be mounted to a Lego Technic axle. Just blowing into the turbine, will cause this engine to rotate, though pressurized air can be used.
** Extreme caution must be used that this turbine not be driven so hard and fast, that it will disintegrate and pose a danger of flying shards. **
by
Helijenks
Huey 1:6 Scale Seat Frame Deck Fixing Point - required for all seat legs, these are fitted to the bottom of the legs with an M2 washer and Self Tapper to allow the twist lock flange to operate, it is then locked in position with the "Ring Pin".
by
Tom.B
My most popular model! A medium sized blaster for all your DX and Voyager Transformers.
by
MrTrouble
This is a full wearable and useable 3D replica of right Iron Man gauntlet very similar to movie model. It's ready to print, smooth and paint. Before you order a gauntlet send me PM about dimensions of your hand if you want to wear it, because current model can be too small or too big for your hand. So I can resize model and upload it for your order. If you wish I can make a second left gauntlet and prepare to print. If you want it, send me PM. Please give measurements in centimeters. DIMENSIONS: http://img829.imageshack.us/img829/8800/handisolated.jpg [Price may change depending on the size of the gauntlet]
by
Lupus
Hyperion 25e P-51D Mustang Pilot
This model is originally intended to be used in the 1206mm wingspan radio controlled Hyperion 25e-class P-51D Mustang aircraft, but can also be perfect for many other similar sized planes, or just as a decorative piece. It is modelled hollow, so it would be as cheap and light as possible, without compromising structural integrity. The pilot is also easy to paint with acrylics, as done in the sample pictures. Scale is approx. 1/9th (base on Hyperion 25e P-51D series RC models).
Height: 46mm (true height)
Width: 61mm
Length: 70mm
Weight: 14 grams (in WSF material)
NOTE: This is only the pilot! The full cockpit kit is sold separately (which also includes the pilot).
Check all the other options at my shop: www.shapeways.com/shops/palmen3d
This model is originally intended to be used in the 1206mm wingspan radio controlled Hyperion 25e-class P-51D Mustang aircraft, but can also be perfect for many other similar sized planes, or just as a decorative piece. It is modelled hollow, so it would be as cheap and light as possible, without compromising structural integrity. The pilot is also easy to paint with acrylics, as done in the sample pictures. Scale is approx. 1/9th (base on Hyperion 25e P-51D series RC models).
Height: 46mm (true height)
Width: 61mm
Length: 70mm
Weight: 14 grams (in WSF material)
NOTE: This is only the pilot! The full cockpit kit is sold separately (which also includes the pilot).
Check all the other options at my shop: www.shapeways.com/shops/palmen3d
by
Oskar_van_Deventer
Size 8, 18.54 mm inner diameter. Innovative five-band ring design by Bram Cohen.
Metal version <-- THIS
Nylon version
Watch the YouTube video of the nylon version.
Other puzzle rings designed by Bram:
Sixth Sense
Take Five
Cross Rings
Metal version <-- THIS
Nylon version
Watch the YouTube video of the nylon version.
Other puzzle rings designed by Bram:
Sixth Sense
Take Five
Cross Rings
by
Maundy
Please note that the QR Code design has improved greatly since the taking of the above photos and looks a lot better, the QR Code is now Embossed not Engraved and is printed in the 'White Detail' material. New photos will be uploaded soon.
So what is the TriStand? The TriStand iPhone case is a stylish, rugged, ergonomic and most importantly practical snap on 3D Printed protective case for your iPhone with flip out integrated stands; these can be used in different combinations to produce very geometrically stable stands to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos. The flip out stands fold flush to the case and 'snap' into place when not in use to stop the stands from opening by themselves. All this while keeping the thickness of the case at only 2.25mm (and 1.5mm at the sides).
Check out the YouTube Video of the case in action.
The TriStand QR also has a cutout in the case to add a Customised 3D Printed QR Code, QR Code stands for Quick Response Code and was initially invented for the manufacturing industry to track parts being produced, however today, these codes are popping up everywhere and are extremely useful; this code can have any information you want on it from plain text to a URL or a virtual business card. You can now exchange contact details using a simple barcode scanner on your smartphone by scanning this code. Blank covers are also available in a range of colours and there is also the TriStand - iPhone 5 Case without a QR Code for those who do not want a QR code on their case.
The TriStand QR is 3D printed for you when you order fully assembled in a grippy, strong, rugged and lightweight plastic polyamide material in the colours in the drop down box labelled 'Select Material' in the top right of the page.
Featured on DamnGeeky.com
Excess powder from the 3d printing process may make the hinges of the moving parts 'sticky' when your case first arrives but this loosens very quickly.
QR Code NOT included, bought separately Here.
Please also check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
This design is protected by the UK 'Design Right'.
© Alex Maund 2012
So what is the TriStand? The TriStand iPhone case is a stylish, rugged, ergonomic and most importantly practical snap on 3D Printed protective case for your iPhone with flip out integrated stands; these can be used in different combinations to produce very geometrically stable stands to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos. The flip out stands fold flush to the case and 'snap' into place when not in use to stop the stands from opening by themselves. All this while keeping the thickness of the case at only 2.25mm (and 1.5mm at the sides).
Check out the YouTube Video of the case in action.
The TriStand QR also has a cutout in the case to add a Customised 3D Printed QR Code, QR Code stands for Quick Response Code and was initially invented for the manufacturing industry to track parts being produced, however today, these codes are popping up everywhere and are extremely useful; this code can have any information you want on it from plain text to a URL or a virtual business card. You can now exchange contact details using a simple barcode scanner on your smartphone by scanning this code. Blank covers are also available in a range of colours and there is also the TriStand - iPhone 5 Case without a QR Code for those who do not want a QR code on their case.
The TriStand QR is 3D printed for you when you order fully assembled in a grippy, strong, rugged and lightweight plastic polyamide material in the colours in the drop down box labelled 'Select Material' in the top right of the page.
Featured on DamnGeeky.com
Excess powder from the 3d printing process may make the hinges of the moving parts 'sticky' when your case first arrives but this loosens very quickly.
QR Code NOT included, bought separately Here.
Please also check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
This design is protected by the UK 'Design Right'.
© Alex Maund 2012
