Monopoly Game Piece, or other uses where a very small miniature is needed. This prints very nicely, and has a nice heft when printed in Stainless Steel, for such a small piece. You can view a video of it on YouTube here: http://www.youtube.com/watch?v=WsPGjgcAaUA

Capacitor bracket for a capacitor 47mm in diameter. Has a bridge to allow wires to pass underneath. It has holes along the circular portion to allow zip ties to pass through. Holes are for #4-40 or M3 screws.

The project can be seen at http://blog.timramich.com/?cat=13

120mm PC Fan Grill with custom text on it.

Nomad Panohead Samyang 7.5mm MFT +0° OMD

Visit thomashuang.net for more information

A compact and lightweight panohead with portability in mind, the Nomad Panohead is quick and simple to use. It is designed to mount a Samyang 7.5mm MFT fisheye lens with a Sony NEX or Micro Four Thirds (MFT) camera for creating spherical panoramic photos in 4 shots. The Samyang lens is also branded by Rokinon, Walimex Pro, and Bower. The Nomad Panohead body and fasteners are sold and shipped separately, due to the production process. You need to purchase fasteners to operate the Nomad Panohead.

• Fixed tilt +0°
• Fixed position at NPP of horizon
• Rotator at 15° increments, indicators for 4 + 6 divisions
• Flip rotator over for smooth rotation
• Free access to focus + aperture rings
• Camera orientation in portrait or 37°, grip up or down
• Material: Polymide 12 Nylon, strong and durable
• 3/8"-16 thread mount (1/4"-20 adapter not included)
• 9000 x 4500 px resolution with 16mp APS-C camera
• 10,400 x 5200 px resolution with 12mp MFT camera

This purchase is for the panohead body ONLY. Fasteners are sold and shipped separately. You MUST purchase fasteners to operate the Nomad Panohead. Camera, lens mount adapter, lens, tripod, monopod, thread adapter, tape, knife, bags, and other accessories in photos and videos are not included and need to be purchased on your own.

Compatible with:

• Olympus OMD E-M5, E-P1, P2, P3, PL1, PL2, PL3, PM1
• Panasonic GX1, G3, GF1, GF2, GF3, GF5
• Panasonic G1, G2, GH1, GH2, GH3 (grip up only)
• Sony NEX-7, NEX-6, NEX-5R, NEX-5n, NEX-5, NEX-f3, NEX-c3, NEX-3

Downloadable 3D Printable Case for the iPhone 5. As per Apple's dimensions and we have checked the corners on the iPhone 5 against an existing case and it fits perfectly. You can download this file to customize and 3D Print for yourself. Sides and back have 1.4mm wall thickness so you can emboss or engrave. I have restricted the materials to our Nylon range as they are best suited for iPhone cases.

Assembly Video

Arm Mount R
Arm Mount L

NOTE: This is a kit to build a toy replica inspired by the weapons from the Assassin's Creed Series and Dishonored . This kit is designed specifically as a con-safe cosplay prop. The end of the prop is squared-off and blunt and is therefore in no way intended to create a potentially dangerous weapon. Any modification to the design as sold is outside the recommendation and responsibility of the creator and manufacturer of this kit.

This is a custom brick to allow an Arduino UNO to connect to Lego* & compatible bricks. I have only tried this part in the White, Strong Flexible material. It connects securely to both the Arduino UNO and to other Lego bricks while still being removable without undue effort. Other materials may work better or worse, if you try a different material, please let me know how it works out.

Hypotrochoid gear system part 1 of 2. In order for you to combine two colors in the gear system, it is split into two products. You can find part 2 of 2 here:
http://www.shapeways.com/model/151829/hypotrochoid_3_to_5_part_2_of_2.html?gid=ug26333

Latest file updated March 08, 2013 with slight correction.

Kilominx is an idea by David Litwin. He built his first Kilominx as a mod of a commercial Megaminx puzzle. The object of this puzzle is the same as for Rubik's Cube: scramble and solve.

Watch the YouTube video
Read on the Shapeways Forum
Read more at the Twisty Puzzles Forum

Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.

Cube consisting of 6 x 6 x 3 bars grid each 52 mm length and 2 mm x 2 mm width. In the edges of the cube there are 8 cubes of 1 m x 1 mm x 1 mm missing material (Designed by Tim C Lueth, 2010-Oct-09)

A 1/24th scale version of a pneumatic jack. The jack is fully functional with rolling wheels, spinning back casters that also roll and up and down articulation. Even the lift plate rotates. These are functional upon printing and move very easily if they are soaked in isopropyl alcohol for 20 minutes (longer than an hour leaves a white film). This cleans off the suspension medium sticky fluid wax. If the stops for various heights no longer work, a little paint or vasoline on the stops in the back will bring them back

Automatic weapons pack includes 3 rifles, 3 pistols and two spare hands . The hands vary between left and right (favoring the right) for more variety on both the weapons and spares. They are attached at the base by a single sprue which must be carefully trimmed away by a sharp razorblade. These weapons are intended to be used with 28mm scale miniatures. I'm uncertain about how these will print with white detail, so print in that material at your own risk! suggestions and critiques are welcome and appreciated

This cockpit kit with pilot figure is intended to be used in the radio controlled 1.45m wingspan FMS P-51D and the Hyperion 40e class Mustang aircrafts, but can be just fine for many other similar sized planes. It is modelled hollow, so it would be as cheap and light as possible, without compromising structural integrity. The kit is easy to paint with acrylic paints.

This kit includes BOTH the cockpit parts as well as the pilot.

Check all the other options at my shop: www.shapeways.com/shops/palmen3d

DJI Phantom wide Landing gear & parallel Battery mount Upgrade-kit.

Give your DJI Phantom a custom look with this beautiful landing gear and upgrade your in flight battery capacity with the integrated battery mount, which allows you to mount two (standard size and larger size) batteries in a parallel setup for longer flight times.

Depending on your Phantom (Naza-M) voltage settings you can get 12 to 20 minutes of flight-time in parallel setup.

If you are using or want to use a small gimbal or camera see also the slim version of the landing gear Upgrade-kit.

Main Features:

Lighter and nicer landing gear

Parallel battery mounting

Suitable for use with a small, medium and large gimbal

Sturdy feet

Custom leg hight

See video and photos for an impression and building instructions.

Includes:

2 - 9,5 gram landing gear and battery mount frames (for 6mm tubing)

1 - 1 gram Compass Mount (for 6mm tubing)

4 - 1 gram Leg Ends (for 6mm tubing)

Not included but required:

4 - 6mm aluminum or carbon tubing (choose your own length)

8 - 2mm screws (unless you use an adhesive)

Velcro tape (for locking horizontal battery movements)

Velcro (for easy battery mounting)

Additional comments:

For loosening and fastening the phantom compass don't use a screwdriver with a magnetic head!! And make sure that you mount the compass perpendicular to the body, in a vertical position for best flight performance.

If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).

Additional Upgrade:

Power Battery door Upgrade-Kit

If you have any comments or questions please leave a comment below.
And if you like this product please leave a Star-rating (at the top of this page) or a comment (at the bottom of the page).

Thanks and have Fun flying your Phantom!!

Back part for G2 Productions 001 "Emergency Alert" Upgrade Kit

This is the back part of the head replacement customization. Painting required.

The head will mount on the neck ball joint assembly.

Must be glued to front part, as no other attachment system is planned for this version.

Recommended material: Frosted Ultra Detail or Polished White Strong and Flexible

INFO: Even after glueing together, the head can still be removed by gently pulling it off the ball joint. This, in no way, means that your original figure can't be reassembled.

TIP: This piece will fit with the light piping component so snugly that glueing the head together might not even be necessary!

Here is a design for all you steampunk fanatics and fans of all things mechanical!!!

This is a steampunk themed desk toy consisting of a cube with 28 gears, all of which rotate in a mesmorising pattern by just rotating one of the gears. In the middle of the cube is a tray that can be used to hold paperclips and other small things. This object is 3D printed as one piece, already fully assembled when it leaves the 3D printer!

The design also comes with a stand so it can stand up on a desk and a lockable lid which is placed on the top of the cube and is locked and unlocked by rotating the gears (the lid locks at the centers of all 4 sides below the gears in the lid). Interchangeable mechanical add-ons may be designed in the future that can be put in place of this lid and driven by the rest of the cogs.

How it works...
This design consists of a cube with 28 gears, on each of 4 sides of the cube are 7 gears: 2 large outer ones that move in opposite directions, the outermost gear has handles on it so it can be easily rotated, the motion between the 2 large cogs is reversed due to 5 smaller gears set within the cube in a similar layout to a planetary gearbox to reverse the gear's direction on each of these 4 faces. Each of these sets of gears on the 4 faces are all liked through the big gear on each of the 4 faces meshing at 90 degrees with the big gear on each of the 2 neighboring sides. This means that if any one gear is spun, they all spin in a memorizing pattern.

For a smoother motion of the Geared Cube use a lubricant suitable for plastic parts, I used a PTFE lubricant from an aerosol can and this was very effective in reducing the friction.

UPDATE3: I've successfully covered the wings with Ultracote! See updated pics. Check out the successful flight! UPDATE2: The latest upload of this model now removes most of the main wing skin, greatly reducing cost and weight! The trade-off is though, now you have to cover the wing with Ultracote or similar wing covering. Not to worry though, the WSF material can take the heat. UPDATE: Printing success! I've successfully received two initial models, so now that the printing is proven successful, I've opened it up for public sale. I've also updated the model with more lightening holes, and I've also added a tail skid to protect the tails, and a slot for adding a balsa vertical-tail. It's cheaper than adding a plastic-printed tail. This is the first in what I hope to be an ongoing series of "Design-Print-Fly" RC airplanes; the Wind Skimmer! Inspired by the birds in nature, namely the Black Skimmer, the Wind Skimmer is designed to showcase the organic design possibilities made available by 3D printing, while still providing a functional and fun RC airplane. Click here to view an interactive 3D model!: http://skfb.ly/l3hgfec0

1:24 Slot car chassis with fixed wheel base 100mm - Replacement chassis for White Point cars. Holes for 6mm oilite or ball bearings. For 18D motors (Black carrera or Bison). White point body mounts fits on this chassis or you can make your own in brass or grp. For low-cut Guide. Min. wheel size 23,5mm. 94mm wb and long guide lead is also possible.

Nomad Panohead Yasuhara Madoka 180 NEX X

Visit thomashuang.net for more information.

The Yasuhara Madoka 180 fisheye lens is currently the only lens for the Sony NEX system that offers a complete circular image. Compact and lightweight, the Nomad Panohead for the Madoka 180 lens is quick and simple to use for creating spherical panoramic photos in 4 shots, an comes in 2 versions, a fixed tilt and multi-tilt version. The Nomad Panohead body and fasteners are sold and shipped separately, due to the production process. You need to purchase fasteners to operate the Nomad Panohead.

• Multi-tilt X version (0°, ±4°, ±8°, ±12°, & reversed +19mm offset)
• Fixed position at NPP for horizon (except reversed offset)
• Rotator at 15° increments, marks for 4 + 6 divisions
• Flip rotator over for smooth rotation
• Material: PA2200 Nylon, strong and durable
• 3/8"-16 thread mount (1/4"-20 adapter not included)
• 6000 x 3000 px resolution when used with 16mp APS-C camera

This purchase is for the panohead body ONLY. Fasteners are sold and shipped separately. You MUST purchase fasteners to operate the Nomad Panohead. 取り付けに必要なネジ類は別売りです。 パンヘッド本体とは別送となります。 Camera, lens mount adapter, lens, tripod, monopod, thread adapter, tape, knife, bags, and other accessories in photos and videos are not included and need to be purchased on your own.

Compatible with:

• Sony NEX-7, NEX-6, NEX-5R, NEX-F3(+8°, +12° with grip up or sideways)
• Sony NEX-5n, NEX-5 (+8°, +12° with grip up or sideways)
• NEX-c3, NEX-3

Here we have a small 3" long prying tool, designed by myself and several other members of the Multitool.org forum.
This tool is officially sanctioned by the forum owners and the MT.O logo is present as a functional part of the tool.
As this is a forum project, no commission has been added to the price.

This is the 3mm thick version of this prybar, there is also a 5mm thick version.

This single-piece tool can be used as a prybar and nail lifting tool, but also has a range of metric hex drivers (2.5, 3.2, 4, 5, 5.5 and 7mm), a bottle opener and a 1/4" hex bit driver.
An o-ring can be installed in the tail to help secure a hex bit (6mm ID, 2mm diameter, not included)

This model is designed to be printed in Stainless Steel or one of it's variants.
The prybar can be secured to a keychain or lanyard with a No.2 McGizmo clip or similar 25mm gate clip through the 1/4" hex hole or with a small split ring through the MT.O dot.

There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.

This is matching pair of scales which will fit onto the sides of any 58mm model Swiss Army Knife with removable plastic sides, including the popular Classic SD. The scales pictured in the example photo are in Black Detail plastic on a Classic SD model SAK.

These are solid scales without slots for the tweezer or toothpick accessories. I have designed them to fit fully and snugly, so depending on the tolerances of the material you order them in, you may need to wrap the knife in a towel and carefully tap them on with a solid object until the scales are fully seated on the knife. Once attached to your knife I do not recommend removing the scales as the attachment holes may become damaged.