Pen not included. This sleeve is for Kickstarter backers of the Pen Type-A campaign. If you bought a USA made version of the pen at shop.cwandt.com, it'll fit, but it will not be a snug fit. These sleeves sometimes comes with some extra powder in it, please make sure you get it all out. Video of powder removal -> https://vimeo.com/47323037

The intrauterine device (IUD) is the world's most widely used method of reversible birth control for women. But as their production and common materials cost only a few cents, they are sold for a staggering 400$- 850$. Unreachable for many women, especially young ones. 

The Bearina IUD is a political product. It demonstrates the disruptive potential of 3D printed Open Designs to give free and global access to essential products, and circumvent industries (such as the Pharma industry) that aggressively defend their intellectual property to control the price and availability of their products. As an Open Design, the Bearina IUD promotes collaborative development and free sharing of knowledge. Further developed by a networked community or in partnership with a forward looking pharma company, It is always available for experimenting with and improving, and could evolve into a functional IUD.

The Bearina, with its bear head image, is visually friendly, to appeal, so to speak, to younger women. It is a conceptual product, a design fiction, and absolutely should not be used as an IUD. Nevertheless, it is designed according to dimensions, materials and shapes commonly found in IUDs.

You are welcome to download the production file of the Bearina IUD (.stl- Creative commons nc-at-sa 3.0 lisence) from my website (www.ronen-kadushin.com). It is free and ready for 3D printing. But if you prefer, you can also download it, or even order some Bearinas from Shapeways.com. They are only 1.25€ each.
In copper- containing IUDs, metal ions dissolving from the device create a spermicidal action. To do precisely that, a 1€ cent coin (copper covered steel) easily snaps in the plastic 3D printed part. An additional piece of nylon string is tied to the bottom part to complete the assembly of the Bearina IUD.
 
Sources and further reading:

http://www.wired.com/magazine/2011/07/ff_iud/?pid=6100&viewall=true
http://www.dr-miller.com/IUDe.html
http://iud-divas.livejournal.com/
http://www.fleur-de-coin.com/eurocoins/coins.asp

Disclaimer
The Bearina is a conceptual research object, and absolutely should not be used as an IUD or for any internal use.
You expressly agree to hold the designer, Ronen Kadushin, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or designs provided, specifically the Bearina IUD concept design.
The use of Open Design designs should be based on your own due diligence and you agree that Ronen Kadushin is not liable for any success or failure of your actions you take to modify, produce, assemble or repair your products.
The user further agrees that use of this design and all products or content contained herein are at your own risk and there is no warranty expressly made herein.

This is a small sample of the "full color sandstone" material, for calibration purposes. It can be used to determine what the colors of your 3d prints will look like, or it can be used to help match 3d you colors to real objects.

Capacitor bracket for a capacitor 47mm in diameter. Has a bridge to allow wires to pass underneath. It has holes along the circular portion to allow zip ties to pass through. Holes are for #4-40 or M3 screws.

The project can be seen at http://blog.timramich.com/?cat=13

Downloadable 3D Printable Case for the iPhone 5. As per Apple's dimensions and we have checked the corners on the iPhone 5 against an existing case and it fits perfectly. You can download this file to customize and 3D Print for yourself. Sides and back have 1.4mm wall thickness so you can emboss or engrave. I have restricted the materials to our Nylon range as they are best suited for iPhone cases.

Custom pedal design. Should fit on a standard pedal skeleton.
I've prototyped this on Sandstone but it should be made from metal. I'm including sandstone as an option so it can be made cheaply to test the size before you commit to spending more money
Hole centers are 54mm. Ask me for the design file for the strap.
Please note you need to buy 2 per bike

Part to be used as support for the light foam wheel. - part of the quadcopter frame (under development)

Gyrocam rail mount for Contour Roam camera

DiaLFonZo produced the first prototype for his V-Tail copter frames in March 2012. This was one of two main size V-Tail frames he soon when on to produce. following the 500 size frame was the 400 size. To compliment this exception quadcopter frame 'InnerbreedFX has developed a canopy for it available for you to buy. for info on the canopy please contact: theinnerbreed@hotmail.co.uk for info on the V-Tail quadcopter frame itself please contact info@dialfonzo-copter.com

This is meant to hold our pleats without drilling into the window frame. Not yet tested if it's strong enough.

Finally the official release of the SkyLight SBG Digital Brushless Gimbal for GoPro Hero 2 HD Cameras!! Designed for the AlexMos SImple Brushless Gimbal Control (SBGC) board, the SkyLight open source gimbal project offers full 360deg 2 axis stabilisation capable gimbal, specifically for the GoPro Hero 2 HD camera (Hero 3 coming soon!). cheap, light, strong, and fully balanced and ready to go "out of the box / off the printer"

5-spoke 52mm RC Car rim

3-Blatt Prop-Halter für EPP1045. Propellerachsen haben einen Durchmesservon oben 5mm, unten 4mm, um noch ein M5 Gewinde reinschneiden zu können. Die Rotationsachse hat 4mm.

This part is a replacement firing pin for the delta-wing missile launcher in the Shogun Warriors Raydeen/Popy Brave Reideen Jumbo Machinder. The part was designed by Popy and reverse-engineered by Sanjeev Selvaraj of http://brownnoize.blogspot.com/ -- thanks Sanjeev!

Project Details: http://yzrandome.blogspot.com/2012/06/darker-than-black-heis-dagger-replica.html

A connection piece to be used between the oversize clamp and Busch & Müller Ixon Bicycle Headlights. It's modeled based on the original part, but the top is put on in reverse. See http://thorwil.wordpress.com/2012/02/25/3d-printing-to-the-rescue/ for details

Part of a wire leg for a multirotor. Each leg needs two hinges. It is held to 1/2" (13mm) square arm with two zip ties. The hinge either holds the end of the wire leg or the wide end of the cross arm.

This is a replacement part for the rewind drive of a Bauer P6 16mm film projektor. My projector had problems rewinding the film after viewing. It looks like the original part had shrunk with age, developed cracks und finally broke. The replacement works without problems so far.

2-Blatt Prop-Halter für EPP1045. Propellerachsen haben einen Durchmesservon oben 5mm, unten 4mm, um noch ein M5 Gewinde reinschneiden zu können. Die Rotationsachse hat 4mm.

Military tire for 1/24 scale truck.