Open Source Lens Motor Mk I Stepper motor based lens control motor, for use with eMotimo TB-3 or Dynamic Perception Mocobus boards. You need this t...

You need this to build the Open Lens Control Motor MkI. You also need the left shell.

4x 6-Tooth High Strength Sprocket

Centerplate to the HK KK2.0 LCD Board on HK Q450 Frame

Camera mount for the HobbyKing Q450 Glass Fiber Quadcopter Frame 450mm with Integrated PCB. Mount slides over one of the protrusions from the fram...

The original Rock Band guitars didn't have a ring around the Start button, making it very easy to accidentally halt game play by bumping the button...

DiaLFonZo produced the first prototype for his V-Tail copter frames in March 2012. This was one of two main size V-Tail frames he soon when on to p...

A set of Computer expansion slot cover plates free for you to download, modify, or have printed "commission free"

DiaLFonZo produced the first prototype for his V-Tail copter frames in March 2012. This was one of two main size V-Tail frames he soon when on to p...

0.95" tall foot for a 1.55"x0.95" inside dimension rectangular tubular leg. Inserts 0.45" in to the leg. Recessed "L" logo on one side.

This is a microscope ring light. Add 28 5 mm LEDs (Nichia NSPW500GS-K1 for example) and current regulators. I used LM317 based CC sources with 5-6 ...

1 Frame and 1 Pivot-Mount for GoPro Hero3, fits to "Herbert Richter" HR-4point-Mounts. Put a thin layer (1 to 2 mm) of foam rubber into the frame b...

The rear sight for my KWA ATP custom slide.

This is actually a holder for 8 rotating mirrors for a laser scanning display project. UPDATE 04/11/2013 I have uploaded the proper model fixed by...

The front sight for my KWA ATP custom slide

This is the part which connect the wheels under the wardrobe, see picture 13 at ikeafans.com/forums/ikea-instructions/21177-bardu-storage-instructi...

A mount to fit a small fisheye camera lens to an iPhone 4.

BUNN ES-1A espresso machine lever

1 required for whole assembly This is the 1st half of the palm that supports the thumb and the 1st, two digits of the bob

Main door inner handle for 1989 Excella Airstream trailer. Write me before you have this made. I had to file the square peg that this fits onto a s...

Replacement mount for tupplur blinds by t0bi is licensed under the Attribution - Share Alike - Creative Commons license. Replacement mount for tupp...

Lenscap for Peleng 8mm fisheye lens

Basic frame for a Lola T 280 slot car 1:32

This is a mirror holder for a laser scanning display project. This holder has surfaces for mirrors at 1/4° to each other

Open back box for LeafCAN display with area for rotary encoder. Fits 2X16 LCD or oled display footprint.

Lever for attaching and detaching the Slice battery from a Toshiba portege M750/80 series laptop. it is a pretty good fit may need to be sanded dow...

IMPORTANT NOTE: This gear has not been verified yet, and uses only rough measurements. I will check the measurements when my digital caliper arrive...

Part 1 of holder for Minox film for scanning in Nikon CoolScan or similar scanner. Recommend using frosted detail platic. Includes holes for 3mm ma...

Part 2 of holder for Minox film for scanning in Nikon CoolScan or similar scanner. Recommend using frosted detail platic. Includes holes for 3mm ma...

After having arms slowly deflect up on me for my upgrade on my Replicator 2 I began to look for a more permanent solution. There are several differ...

Trip meter reset arm for 1997 Honda CBR 600FV.