by
Helijenks
Huey 1:6 Scale Seat Frame Deck Fixing Point - required for all seat legs, these are fitted to the bottom of the legs with an M2 washer and Self Tapper to allow the twist lock flange to operate, it is then locked in position with the "Ring Pin".
by
Maundy
Please note that the QR Code design has improved greatly since the taking of the above photos and looks a lot better, the QR Code is now Embossed not Engraved and is printed in the 'White Detail' material. New photos will be uploaded soon.
So what is the TriStand? The TriStand iPhone case is a stylish, rugged, ergonomic and most importantly practical snap on 3D Printed protective case for your iPhone with flip out integrated stands; these can be used in different combinations to produce very geometrically stable stands to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos. The flip out stands fold flush to the case and 'snap' into place when not in use to stop the stands from opening by themselves. All this while keeping the thickness of the case at only 2.25mm (and 1.5mm at the sides).
Check out the YouTube Video of the case in action.
The TriStand QR also has a cutout in the case to add a Customised 3D Printed QR Code, QR Code stands for Quick Response Code and was initially invented for the manufacturing industry to track parts being produced, however today, these codes are popping up everywhere and are extremely useful; this code can have any information you want on it from plain text to a URL or a virtual business card. You can now exchange contact details using a simple barcode scanner on your smartphone by scanning this code. Blank covers are also available in a range of colours and there is also the TriStand - iPhone 5 Case without a QR Code for those who do not want a QR code on their case.
The TriStand QR is 3D printed for you when you order fully assembled in a grippy, strong, rugged and lightweight plastic polyamide material in the colours in the drop down box labelled 'Select Material' in the top right of the page.
Featured on DamnGeeky.com
Excess powder from the 3d printing process may make the hinges of the moving parts 'sticky' when your case first arrives but this loosens very quickly.
QR Code NOT included, bought separately Here.
Please also check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
This design is protected by the UK 'Design Right'.
© Alex Maund 2012
So what is the TriStand? The TriStand iPhone case is a stylish, rugged, ergonomic and most importantly practical snap on 3D Printed protective case for your iPhone with flip out integrated stands; these can be used in different combinations to produce very geometrically stable stands to stand the iPhone in 1 of 3 orientations, a portrait orientation and 1 of 2 angles on both of the landscape orientations, one is great for typing, and the other is great for watching videos. The flip out stands fold flush to the case and 'snap' into place when not in use to stop the stands from opening by themselves. All this while keeping the thickness of the case at only 2.25mm (and 1.5mm at the sides).
Check out the YouTube Video of the case in action.
The TriStand QR also has a cutout in the case to add a Customised 3D Printed QR Code, QR Code stands for Quick Response Code and was initially invented for the manufacturing industry to track parts being produced, however today, these codes are popping up everywhere and are extremely useful; this code can have any information you want on it from plain text to a URL or a virtual business card. You can now exchange contact details using a simple barcode scanner on your smartphone by scanning this code. Blank covers are also available in a range of colours and there is also the TriStand - iPhone 5 Case without a QR Code for those who do not want a QR code on their case.
The TriStand QR is 3D printed for you when you order fully assembled in a grippy, strong, rugged and lightweight plastic polyamide material in the colours in the drop down box labelled 'Select Material' in the top right of the page.
Featured on DamnGeeky.com
Excess powder from the 3d printing process may make the hinges of the moving parts 'sticky' when your case first arrives but this loosens very quickly.
QR Code NOT included, bought separately Here.
Please also check out the other models in the TriStand product line:
iPhone 4 / 4s:
TriStand - iPhone 4 / 4s Case with Built In Stands
TriStand QR - iPhone 4 / 4s Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 4 / 4s Case with Built In Stands (cheapest)
iPhone 5:
TriStand - iPhone 5 Case with Built In Stands
TriStand QR - iPhone 5 Case with Built In Stands and QR Coded Business Card
TriStand Minimal - Minimalistic iPhone 5 Case with Built In Stands (cheapest)
This design is protected by the UK 'Design Right'.
© Alex Maund 2012
by
TomZ
About this puzzle
The SuperX was first made by Adam Cowan in December 2006. However, the puzzle was very squishy and the pieces would get out of alignment often. He later tried to improve upon his design by using ball bearings and while this helped a little, the puzzle was also not stable. Later, Andrew Cormier designed a more stable variant with a mechanism that was more like a V-Cube. This puzzle also was squishy, and he later designed a version with magnets to help keep the pieces aligned. Various copies with/without magnets have later been hand built by various builders. Finally, I have designed a version that does not use magnets but uses a clicking mechanism, like that found on a V-Cube 6 to keep the pieces aligned. While the puzzle does not turn as well as Andrew's copy, it saves on the cost and effort of gluing in magnets (magnets don't really adhere well to superglue so they frequently fall out of the puzzle). All previous SuperX's have been built by layering a Dino Cube on to a 2x2x2. My version is the first to use a fundamentally different mechanism. It uses the same mechanism as my Dino 3x3x3, which means the pieces are not just supported from the corners but also from the (internal) edges.
The puzzle turns quite well and is completely stable, but obviously there is the clicking which is slightly more pronounced than on a VCube 6. The pieces have a tiny amount of wiggle room, but the clicking mechanism keeps them in place really well.
Buying information
Ordering this model will get you a DIY kit with all the plastic pieces necessary to build a SuperX, which you will need to assemble yourself. It does not come with the necessary stickers or screws as Shapeways cannot supply. You can purchase stickers from www.dr-sticker.com. The screws can be had from any hardware store, you need M3 screws, about 10-15mm long.
A warning beforehand: this is one of the most tricky to assemble puzzles I've designed. It will also need a good amount of lubrication and breaking in before it will turn as good as the one in my video. I have also increased the fillet radius to prevent locking up, this results in slightly larger gaps near the center than pictured.
If you do not feel like assembling your puzzle yourself, you can also order a fully finished copy from me for a price that is slightly higher than Shapeways', but you miss out on all the fun of assembling your own puzzle! For this service, contact me at tom@tomvanderzanden.nl.
The SuperX was first made by Adam Cowan in December 2006. However, the puzzle was very squishy and the pieces would get out of alignment often. He later tried to improve upon his design by using ball bearings and while this helped a little, the puzzle was also not stable. Later, Andrew Cormier designed a more stable variant with a mechanism that was more like a V-Cube. This puzzle also was squishy, and he later designed a version with magnets to help keep the pieces aligned. Various copies with/without magnets have later been hand built by various builders. Finally, I have designed a version that does not use magnets but uses a clicking mechanism, like that found on a V-Cube 6 to keep the pieces aligned. While the puzzle does not turn as well as Andrew's copy, it saves on the cost and effort of gluing in magnets (magnets don't really adhere well to superglue so they frequently fall out of the puzzle). All previous SuperX's have been built by layering a Dino Cube on to a 2x2x2. My version is the first to use a fundamentally different mechanism. It uses the same mechanism as my Dino 3x3x3, which means the pieces are not just supported from the corners but also from the (internal) edges.
The puzzle turns quite well and is completely stable, but obviously there is the clicking which is slightly more pronounced than on a VCube 6. The pieces have a tiny amount of wiggle room, but the clicking mechanism keeps them in place really well.
Buying information
Ordering this model will get you a DIY kit with all the plastic pieces necessary to build a SuperX, which you will need to assemble yourself. It does not come with the necessary stickers or screws as Shapeways cannot supply. You can purchase stickers from www.dr-sticker.com. The screws can be had from any hardware store, you need M3 screws, about 10-15mm long.
A warning beforehand: this is one of the most tricky to assemble puzzles I've designed. It will also need a good amount of lubrication and breaking in before it will turn as good as the one in my video. I have also increased the fillet radius to prevent locking up, this results in slightly larger gaps near the center than pictured.
If you do not feel like assembling your puzzle yourself, you can also order a fully finished copy from me for a price that is slightly higher than Shapeways', but you miss out on all the fun of assembling your own puzzle! For this service, contact me at tom@tomvanderzanden.nl.
by
worldleader
Günstiges Ersatzteil für Audi A4 B6/B7 (Alle Typ 8E und 8E) Mittelarmlehnen bei gebrochener Verriegelung. In Black Strong & Flexible, ideale Farbe für dunkle/schwarze Innenraumausstattung. NUR verwenden, wenn die Originalfeder noch vorhanden!!! Siehe Bild des Originalteiles, ansonsten andere Version (z.B. mit eingebauter Feder verwenden). --- Zum Ersetzen den Deckel der Armlehne ausbauen (dabei die beiden Halter des Deckels zusammendrücken und den Deckel aus der Armlehne herausdrehen). Den Deckel vom Stoff trennen; mit einem Spachtel Stoffteil und Deckel trennen, in dem man einfach zwischenhineinfährt und die beiden Teile auseinanderdrückt. Das Unterteil ist seitlich 6 x geklipst (siehe Bilder), es reicht aber, wenn man nur die ersten beiden Klipse öffnet um die Verriegelung zu tauschen. Achtung, hier ist eine Feder, die gerne wegspringt! Feder in das Ersatzteil einsetzen (siehe Bild), dann Ersatzteil mit Feder wieder einsetzen. Dabei zuerst die Feder am Deckel einhaken und dann die beiden Pins rechts und links in die Lagerbuchsen einschnappen lassen, dann den Deckel wieder zusammen Klipsen. In der Nähe der Lagerbuchsen sind je eine Klebestelle, hier gegebenenfalls mit Sekundenkleber für mehr Haftung sorgen. --- Auf Anfrage auch gerne mit individuellem Logo oder Design! Auf den Bildern sind das Originalteil mit geklebten Stegen und das Teil in Black Strong & Flexible White Strong & Flexible und Coral Red Strong & Flexible. Diese Teile gibt es auch mit Audiringen, A4- oder Quattroaufschrift! Weiter informationen in diesem shop.------------------------------------------------------------------------------------------ Low-priced spare part for Audi A4 B6/B7 (Type 8E and 8H) center armrests with a broken lock. Black Strong & Flexible, ideal color for dark / black interior. ONLY use THIS if the original spring still exists! See picture of the original part. Otherwise use different version (eg "with includes spring”). --- To replace lid of the armrest, disassemble armrest by squeezing the two holders of the armrest and remove. Separate the cover from the fabric, by using a putty knife cloth, the lower part is at the side clipped 6 times (see pictures). Just open the first two clips to replace the lock. Attention, here is a spring that likes to jump away! Insert spring into the spare part (see image), then first hook the spring on the cover, and then the two pins can be snap left and right into the bushes, then clip the lid back together. Clips near the bushes are each a splice, here glue if necessary with super glue for more liability. --- On request we can do with customized logo or design. In the pictures are the original part with taped ribs and the part in Black Strong & Flexible and Coral Red Strong & Flexible. This part is also available with Audi rings, A4 or quattro inscription! Further info see other parts in this shop.
