3-Blatt Prop-Halter für EPP1045. Propellerachsen haben einen Durchmesservon oben 5mm, unten 4mm, um noch ein M5 Gewinde reinschneiden zu können. Die Rotationsachse hat 4mm.

A connection piece to be used between the oversize clamp and Busch & Müller Ixon Bicycle Headlights. It's modeled based on the original part, but the top is put on in reverse. See http://thorwil.wordpress.com/2012/02/25/3d-printing-to-the-rescue/ for details

Part of a wire leg for a multirotor. Each leg needs two hinges. It is held to 1/2" (13mm) square arm with two zip ties. The hinge either holds the end of the wire leg or the wide end of the cross arm.

This is a Sheet Set for a Hollow Mini Mendel. Parts were made hollow to cut down on cost of printing. Just fill them with some sort of epoxy resin to give them strength.

Pretty expensive alternative to printing them yourself on a DIY 3D printer, but time is money... right?

These are provided AT COST. No profit here, since they are GNU GPL...

Original single hollow parts done by Marcus Wolschon @ http://www.thingiverse.com/thing:2204
Single sheet hollow parts page on thingiverse @ http://www.thingiverse.com/thing:5074

feeder support for 8mm axis see OPENPNP project

Gear 32 teeth, pitch radius 16mm

4 required for whole assembly This is the second bone, the middle, finger bone (not middle-finger bone), for all four fingers, including the pinky.

4 required for whole assembly This is the tip of the fingers, not the thumb, of the bob

Replacement clip mount on the Verizon Droid1 case. This clip will fit into a $4 suction arm set from MPJA here: http://www.mpja.com/prodinfo.asp?number=18521+MI ... Easy mod for mounting your droid 1!

Firefly Ice enclosure outer shell part.

Führungsstück Windschild Ducati Multistrada Modelljahr 2013. Wird 2 mal benötigt. Zur Beseitigung bzw. Milderung der Klappergeräusche die mit den Orginalteilen am Windschild auftreten.

Table top Roller Coaster, there is 2 ways to print this model. 1. print entire assembly with body and wheels. 2. print body and wheels separately for more color options. Wheel are designed to spin! Recommend printing "white strong & flexible" for best price and "do it yourself" custom painting. Custom engraving is available by request for free! Enjoy!

Lenscap to integrate lens with eyepiece.

8mm feeder for pick and place machine. OPENPNP project

Part of Ultimaker extruder update by ghagen01 http://www.thingiverse.com/thing:15897
Have it made in steel.
You also need the pin (model 530335).

This is a spherical function that I thought turned out like a lemon squeezer, but I wouldn't actually advise using it for that purpose. It was created using Functy and is completely defined by the following functions.

Radius = 0.01*((3+(cos(12*(a+(p*2)))*((sin(p)+0.01)**(1.3)))+cos(4*p))*(1-((p/(22/7))**(2.5)))),

(R, G, B) = ((1+cos(p*2))/2, 0.3, cos(12*(a+(p*2)))>0.9).

I've not yet printed it, so I'm afraid I can't guarantee what the result will be like if you decide to print yourself a copy (although I'd be interested to know!)

This is an improved version of my Lacy Raindrop Bobbin. It's sized to fit Majacraft spinning wheels.

Battery mounting for 2xPanasonic LC-R127R2PG (12,7.2Ah) with Beijixing electric BJX58 controller (24V, 250W), part of my eBike project

One cross arm and two hinges and 3/32 wire make a single multirotor leg. Inspired by legs on Aerovironment Qube.