Discover » Jewelry » Downloadable

Sort:
by improbablecog
Resembling a bat or dragon, these biotech earrings are the wings of an alien exoform.


This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick

Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:

- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com

Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)

That's it, otherwise have fun!
 
(18)  
  •  
From: $40.00
 
by improbablecog
10g


Though these earrings may resemble an xenomorphic sea creature, we can neither confirm nor deny that they were modeled after any organism living, dead, or bearing any blood relation to our board of directors.

These earrings are sized for 18 gauge piercings and should fit most people with pierced ears. If you need a different size, just ask! I have a few larger gauges already available in the shop, and can resize it to a custom gauge if it's not already there.

Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
 
(6)  
  •  
From: $29.00
 
by improbablecog
 
(4)  
  •  
From: $25.00
 
by SemajNamssiw
A smaller version of the DNA Earring.

You should receive two earrings if this model is ordered.  I have not tested this myself.  Let me know if it works correctly!  Note that earring hooks ARE included.
 
(4)  
  •  
From: $2.57
 
by improbablecog
Flora Earrings
 
(6)  
  •  
From: $22.00
 
by improbablecog
- 16 gauge -

 
(6)  
  •  
From: $46.00
 
by thekaseman
 
(0)  
  •  
From: $4.10
 
by improbablecog
No robotic avians were harmed in the making of this product.

These earrings are sized for 18 gauge piercings. They should fit most people with pierced ears, but if you need a smaller gauge, check out the fishhook version in my shop.
If you need a larger gauge, just ask and I can resize them for you. I will continue to add other sizes as I make them.

Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
 
(0)  
  •  
From: $30.00
 
by Camazine
Generated by 'Sculpture Generator 1' by Carlo H. Séquin, UC Berkeley.
Successfully printed in Stainless Steel

successfully_printed
 
(4)  
  •  
From: $3.88
 
by improbablecog
To purchase these, and other jewelry with gift box, please go to: http://improbablecog.etsy.com
 
(2)  
  •  
From: $43.00
 
by SkipMonkey
 
(2)  
  •  
From: $16.76
 
by improbablecog
A beautiful floral pendant in an art nouveau style, from the same genus as the Tendril and Flora earrings.

Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.

This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick

Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:

- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com

Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)

That's it, otherwise have fun!
 
(0)  
  •  
From: $27.00
 
by flypig

Celtic knot rolled round to create a ring, making quite a balanced design. Made from a knot with 20 loops and seed 1 using the Knot application.


The diameter of the ring is 16mm on the inside (size 5½/K½). Send me a message if you'd like me to create a different sized version.

 
(0)  
  •  
From: $1.78
 
by clothbot
This little button includes special diagonal thru-holes in the pegs for sewing conductive thread. Each peg's center hole passes straight through to act as a socket for thru-hole component terminals and wires.

Use them to make more mechanically robust and electrically isolated contacts in sewable electronics.
 
(4)  
  •  
From: $2.64
 
by baltimore
Right from the laboratory.
 
(0)  
  •  
From: $25.00
 
by A.Square
NOTE: The silver piece shown in the pictures was NOT printed by Shapeways. It was printed in Frosted Ultra Detail, which was then used to make a mold which was used to hand-cast it in silver. I haven't printed it in silver, so I can't vouch for how it will turn out.
 
(2)  
  •  
From: $10.38
 
by improbablecog
Icon of the electronics age, the power symbol is ubiquitous. It originates from the binary notation used on power switches to represent 1(on) and 0(off), but when single momentary switches started being used to perform both operations, they were combined into this single symbol.

This pendant combines the icon of electronics with that earlier representation of industrial age mechanical technology, the cog.
Together they are a symbol of the machine.
 
(0)  
  •  
From: $21.68
 
by improbablecog
These robotic wings are designed to be used with standard earring fishhooks and a jump ring to connect (findings are not included at this point, so you'll have to add those). A good alternative to the standard Bladewings if you don't have 18g or larger piercings.
 
(0)  
  •  
From: $22.72
 
by SkipMonkey
 
(2)  
  •  
From: $19.57
 
by A.Square
Cufflinks inspired by Super Mario Bros. NOTE: the silver shown in the picture is NOT printed by Shapeways; a Frosted Ultra Detail print was used to create a mold, which was then used to cast in them in silver. I haven't printed them in silver, so I don't know how they'll turn out.
 
(0)  
  •  
From: $12.65
 
by dformer
Saw Blade Pendant #2
 
(14)  
  •  
From: $3.28
 
by somersault18:24
 Welcome to the world of the Pande-Zote family!

 

A huge family with lots of different characters, different personalities, a bunch of new friends to cherish.

 

Try to find your soulmate among them. The family is continuously expanding.

 

Personalize them with colors to reflect your mood or outfit.

 

To make all combinations possible, each Pande-Zote family member is sold separately (1 earring). 

You can choose to wear twins, brothers, grandpa and grandchild...the limit is yours!

 

Meet the Pande-Zotes

 

Oskar loves to make bad jokes during family dinners. He is too lazy to walk that's why he is always rolling around. He loves red apples and sour cream. But watch out: he will poke your cheek as soon as you get distracted.

 

Mia is the older sister of Oskar and VIktor. She is very easily impressed by things, her mouth falls open all the time. She is a bit shy, but very kind. She loves to eat vanilla ice-cream, so be careful: she will do everything, even jump from your ear, if she sees one.

 

Viktor is the twin brother of Oskar. He is always in a cloud and loves to sing. He rolls to avoid aunt Lucinda that tries to kiss him all the time so he will probably hide behind your ear.  But listen carefully, he will be there singing only for you.

 

Lucinda is Mia's, Oskar's and Victor's aunt. She was playing for a long time in a jazz band the saxo so she has this huge cheeks that are very useful to inflate balloons in the family parties. She is always rolling behind her nieces to kiss them, with her big red lips. She has millions of histories to tell you, she will be there chatting to your ear.

 

Pepe always tries to be different. This is why he likes to hang from your neck. He spents a lot of time traveling in Spain eating ham and learning how to dance some salsa. He will be there, always swinging from your neck while telling a lot of jokes, really bad ones sometimes.

 

Lionel is the artistic son of Lucinda. He travels with a circus all around the world and performs in a show were he dangerously rolls between cactuses. Mia admires him a lot. Her mouth falls open, even more than normal, each time he comes home for a visit. He will try to impress you with all his experiences gathered around the world.

 

Zora is the little daughter of Lucinda. She likes to spend lots of time with her cousin Mia, most of it rolling on the floor to get her hair straight. She is always laughing, sometimes without a reason, but this cheerful character makes Lionel, her older brother, adore her.

 

Edward is the grandfather of the family. He is very proud of all his little round grandchildren. He is very emotional and loves to tell stories on family reunions. When he was younger, he was an actor, and he still likes to perform for his big family. To be round or not to be, that will be his question in your ear.

 

Laura is the wife of Edward. She does not like to be called grandmother as she is very conceited and she always lies about her age. When she was young she was a famous opera singer, which is still her passion. Just choose an aria you like and she will sing it for you in your ear.

Poeftie is the mascot of Mia, Oskar and Viktor. He is always rolling around looking for a small piece of candy that can fall to the floor. He often sniffs around to try to find something to eat, as he is very sweet-toothed. So watch out, he will bite you if he thinks you are sweet.

 
(6)  
  •  
From: $12.50
 
by improbablecog
Resembling a bat or dragon, these biotech earrings are the wings of an alien exoform. 

The 18g one piece Wing Earrings are currently not printable due to the extremely thin ear hooks, but here is another way to wear them (also great for those with smaller than 18 gauge piercings in the first place). You will need to find a pair of standard fishhook style earring hooks, and jump rings to attach them (not included at this time unfortunately).
 
(0)  
  •  
From: $30.00
 
by phraust
Just threw this together for my daughter's Halloween costume from Avatar (Katara, of course!). It's got the Water Clan's emblem on the front, and the Japanese Kanji in the back for Mizu, or water.
 
(2)  
  •  
From: $6.21
 
by unellenu

Julia Fractal pendant.

The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu

unellenu website
http://unellenu.com

twitter: unellenu
http://twitter.com/unellenu

facebook: unellenu jewellery
http://www.facebook.com/unellenu

facebook: unellenu sculpture and homewares
http://www.facebook.com/pages/Unellenu/188186071212813

youtube: unellenu
http://www.youtube.com/unellenu1

Google +
Janelle Dehanne Wilson
 
(0)  
  •  
From: $5.95
 
by dformer
Saw blade pendant #1
 
(14)  
  •  
From: $3.17
 
by svonmuehlen
It's a size 8.5
 
(1)  
  •  
From: $2.48
 
by Charmed_Life_Designs
PLEASE NOTE: This is only half of my Linked Heart Necklace. I separated them so that it's easier to get the halves in different materials. You will need to order the other half to get a complete set!

The other half is here:

The original can be found here: http://www.shapeways.com/model/96062/linked_heart_necklaces.html?gid=ug35653
 
(0)  
  •  
From: $4.95
 
by improbablecog
Jigsaw Cufflinks are based on the nautilus logo of the Seattle based maker space, Jigsaw Renaissance.
Visit http://www.jigsawrenaissance.com to learn more about this multidisciplinary Seattle maker space!

Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
 
(1)  
  •  
From: $42.00
 
by flypig

Ring created using Functy. Constructed from 8 parametric curve threads each with a formula similar to the following:


(x, y, z) = ((8.5+((1-cos(8*a*(2*pi)))/2))*cos(a*(2*pi)), (8.5+((1-cos(8*a*(2*pi)))/2))*sin(a*(2*pi)), 2.5*cos(4*a*(2*pi))),

radius = 0.5*(4-cos(8*a*(2*pi)))/5.


The diameter of the ring is 16mm on the inside (size 5½/K½). Send me a message if you'd like me to create a different sized version.

 
(0)  
  •  
From: $1.78
 
by anastasia.globa
Size 7 (17,32 mm) The Great Serpent Ring is awarded to women who have been raised to the Accepted among the Aes Sedai. The Great Serpent is a symbol for time and eternity. The design is inspired by the famous logo, which you can find on any "Wheel of Time" book written by Robert Jordan.
 
(0)  
  •  
From: $8.36
 
by Camazine
Successfully Printed in Stainless Steel
successfully_printed This is model of a Yacare caiman alligator skull created from a CT scan of an actual skull measuring 35 cm (14 inches) in length. The 3D print of the skull is 5.6 cm long and 3 cm wide (2.25 inches by 1.2 inches). The Yacare caiman is a species of caiman found in central South America. One of the photos shows the actual Caiman skull along with the stainless steel print.
 
(0)  
  •  
From: $42.04
 
by akaliuga
1.5x0.8dx0.12
 
(0)  
  •  
From: $10.18
 
by paulate
These earrings are based on the Calla lily, a type of flower that has one petal wrapped around a stamen.

Unfortunately the earring backs are not included with the purchase.
 
(0)  
  •  
From: $4.32
 
by TravisRoske
A bike chain necklace Aprox 20" circumference
 
(0)  
  •  
From: $20.04
 
by somersault18:24
 Welcome to the world of the Pande-Zote family!

 

A huge family with lots of different characters, different personalities, a bunch of new friends to cherish.

 

Try to find your soulmate among them. The family is continuously expanding.

 

Personalize them with colors to reflect your mood or outfit.

 

To make all combinations possible, each Pande-Zote family member is sold separately (1 earring). 

You can choose to wear twins, brothers, grandpa and grandchild...the limit is yours!

 

Meet the Pande-Zotes

 

Oskar loves to make bad jokes during family dinners. He is too lazy to walk that's why he is always rolling around. He loves red apples and sour cream. But watch out: he will poke your cheek as soon as you get distracted.

 

Mia is the older sister of Oskar and VIktor. She is very easily impressed by things, her mouth falls open all the time. She is a bit shy, but very kind. She loves to eat vanilla ice-cream, so be careful: she will do everything, even jump from your ear, if she sees one.

 

Viktor is the twin brother of Oskar. He is always in a cloud and loves to sing. He rolls to avoid aunt Lucinda that tries to kiss him all the time so he will probably hide behind your ear.  But listen carefully, he will be there singing only for you.

 

Lucinda is Mia's, Oskar's and Victor's aunt. She was playing for a long time in a jazz band the saxo so she has this huge cheeks that are very useful to inflate balloons in the family parties. She is always rolling behind her nieces to kiss them, with her big red lips. She has millions of histories to tell you, she will be there chatting to your ear.

 

Pepe always tries to be different. This is why he likes to hang from your neck. He spents a lot of time traveling in Spain eating ham and learning how to dance some salsa. He will be there, always swinging from your neck while telling a lot of jokes, really bad ones sometimes.

 

Lionel is the artistic son of Lucinda. He travels with a circus all around the world and performs in a show were he dangerously rolls between cactuses. Mia admires him a lot. Her mouth falls open, even more than normal, each time he comes home for a visit. He will try to impress you with all his experiences gathered around the world.

 

Zora is the little daughter of Lucinda. She likes to spend lots of time with her cousin Mia, most of it rolling on the floor to get her hair straight. She is always laughing, sometimes without a reason, but this cheerful character makes Lionel, her older brother, adore her.

 

Edward is the grandfather of the family. He is very proud of all his little round grandchildren. He is very emotional and loves to tell stories on family reunions. When he was younger, he was an actor, and he still likes to perform for his big family. To be round or not to be, that will be his question in your ear.

 

Laura is the wife of Edward. She does not like to be called grandmother as she is very conceited and she always lies about her age. When she was young she was a famous opera singer, which is still her passion. Just choose an aria you like and she will sing it for you in your ear.

Poeftie is the mascot of Mia, Oskar and Viktor. He is always rolling around looking for a small piece of candy that can fall to the floor. He often sniffs around to try to find something to eat, as he is very sweet-toothed. So watch out, he will bite you if he thinks you are sweet.

 
(5)  
  •  
From: $12.50