This is a new version of the Hand- Heart sculpture. It includes loops that make for easy attachment of a necklace chain!

*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains

Draw your earrings and we will turn them into 3d.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your ring in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.

Cubichain bracelet (for custom sizes)
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)

Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.

Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.

Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.

Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch

A matching necklace available here:
Cubichain Necklace 8

Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.

Skyrim 'Dragonborn' ring

Your own Skyrim ring ! Write your own (character) name in Draconic language..(now it's writing Novastar)

The pictures of the ring are in stainless steel
pictures in stainless steel


Also check out my Skyrim pendant Skyrim pendant .

Personalize your ring by choosing a ring size.
~
Sizes
~
Size 5 / 15
Inner diameter: 0.61 inch / 15.70 mm
Inner circumference: 1.94 inch / 49.21 mm
~
Size 6 / 16
Inner diameter: 0.64 inch / 16.51 mm
Inner circumference: 2.06 inch / 52.39 mm
~
Size 7 / 17
Inner diameter: 0.68 inch / 17.35 mm
Inner circumference: 2.19 inch / 55.56 mm
~
Size 8 / 18
Inner diameter: 0.71 inch / 18.19 mm
Inner circumference: 2.31 inch / 58.74 mm
~
Size 9 / 19
Inner diameter: 0.74 inch / 18.89 mm
Inner circumference: 2.44 inch / 61.91 mm
~
Size 10 / 20
Inner diameter: 0.77 inch / 19.84 mm
Inner circumference: 2.56 inch / 65.09 mm
~
Size 11 / 21
Inner diameter: 0.81 inch / 20.68 mm
Inner circumference: 2.69 inch / 68.26 mm


The ring is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.

var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-27376216-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })();

[UPDATE] 24/01/2013:
The amulet is now available in a few smaller sizes:
Amulet 3.5cm

Amulet 3.0cm

///////////////
Amulet is 4 cm (1.6 in) with increased details!!!
(like the mouth and eyes, to make the lines more visible)
For the ones who think it's a bit to dark i would suggest to order it in Gold Plated Glossy.

Amulet comes without a cord!

For infos about the materials pls check this site: http://www.shapeways.com/materials/steel

This amulet was inspired from the amulet which Dean Winchester is wearing in the TV-Series SUPERNATURAL.
Should be very screen accurate.

Please rate the amulet if you like it. Thanks! :)

Neue, überarbeitete Version. Auf 4cm vergrößert und Detailgrad erhöht!!
Details an den Augen und dem Mund wurden ebenfalls verstärkt, um sie deutlicher zu machen.
Wem das Material "Antique Bronze Glossy" zu dunkel ist, dem schlage ich vor "Gold Plated Glossy" zu wählen :)

Dieses Amulett ist inspiriert von der Halskette die Dean Winchester in SUPERNATURAL trägt. Habe sie möglichst detailgetreu nachempfunden und kommt dem Original sehr Nahe finde ich.

Hoffe, es gefällt euch :) Dürft es gerne oberhalb dieser Seite mit den Sternen bewerten. Danke!

Kingdom: Animalia
Phylum: Mollusca
Class: Cephalopoda
Order: Octopoda
Suborder: Incirrina
Family: Octopodidae
Subfamily: Octopodinae
Species: Octopus vulgaris, the Common Octopus.

Members of the class cephalopoda are carnivorous hunters. They have the most advanced nervous system of all invertebrate animals and are an important example of advanced cognitive evolution in animals.

O. vulgaris is the most studied of all octopus species and possesses excellent eyesight, capable of distinguishing shapes, textures, and colour. It is the only animal which has been conclusively shown to use tools, and is proficient at learning simple processes such as unscrewing a jar.

Cephalopods are able to release dark pigment into the water as an escape mechanism, which in the past has been extracted and used by humans as an ink or dye. The word sepia comes from the Latin word for cuttlefish, s?pía.

The Ring:

This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart

this pieces is size LARGE
size MEDIUM also available
not sure which size you need? check out our sizing chart

An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.

The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.

Resembling a bat or dragon, these biotech earrings are the wings of an alien exoform.


This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick

Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:

- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com

Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)

That's it, otherwise have fun!

A clock frozen in time, the Time Keeper commemorates a birth date, an anniversary, or any other significant moment in your life, in history, or the future. It will keep that time with perfect accuracy, forever. You set the date and time. You can also include a short message below the date.

UPDATE: The Time Keeper has been thickened 50% to ensure printability.

Draw your earrings and we will turn them into 3d.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your earrings in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.

You can also do it yourself with our 2D to 3D design tool, and upload a black and white .jpg. You'll just have to add your own earring hooks and get the measurements correct. Note that it doesn't support multicolored image nor it would treat the image as texture. The image will only be used for bumping the depth on the surface.

Some people are hurt on the outside, but some have their pain somewhere a bit deeper. Wear this pendant to show your awareness of the kinds of pains that can't be seen.

This pendant was made in homage of a certain visual novel that celebrates ones overcoming their wounds that lie both on the inside as well as the outside.

Being at just over one inch square, it is the perfect size for either men or women.

A ring with crystals growing from it .

*Hole diameter 18,20mm* Size 8.


*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring

Ring in the form of an octopus.
Default ring size is 18.5mm (various sizes available).
Also available as bracelet.. Please contact us

Ring based on Portal 2 Wheatley

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

The original Eardrops
A pair of elegant spiral droplet earrings.
Absolutely stunning in the new Premium Silver!


I recommend to use these with silver earring hooks and attach them with (7mm) split rings (not included)
These are availble at your local bijoux or jewellery store or via websites.
If you have trouble finding them, contact me with a copy of your invoice and I will make sure you get a pair!

More earrings

Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12

The Skull Ring by Bits to Atoms is 3D printed in stainless steel with a tessellated and slightly pitted texture. A masculine piece that works just as well with denim jeans and a t-shirt as it does with a 3 piece suit (or formal dress).Please contact for bespoke sizing.

A striking cellular cuff inspired by microscopic cellular structures and created using computer simulation and 3d-printing.

this bracelet is size LARGE
also available in size MEDIUM


The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.

It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.

--



this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials
 

Ring Based on Ezio Vambrace and Hidden Blade from Assassin's Creed.

Vambrace rotates to reveal hidden blade design on band.

US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide

Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12

Inspired by the complex forms of radiolarians, where intricate pattern is integral to structure, these shapes derive from a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. Made to order in your size.

This little planter has been hit by a shrink ray! No, just kidding, it's based on the design of another one, but is 40% smaller. With this miniature wearable planter, you can carry a small plant or a small flower with you on your day's adventures. The much smaller size allows the production process to use considerably less plastic, which translates to a much smaller price. Unlike it's larger older sister, this wearable planter is made of an acrylic polymer. This material has a beautiful smooth finish and does not need to be painted like other necklaces I make that are made out of nylon. The material is inherently watertight as well! Like the other wearable planters, this one is created with the same modeling software and on the same style of 3d printer. This planter is an experiment with scale. It is made of the same acrylic polymer as the translucent planters, but is a much smaller size. This material is watertight, and acts as a perfect vase to carry a bud or a sprout on your day's adventures. Orders from Shapeways do not include a cord, if you would like a cord with your necklace, please buy one from my website www.wearableplanter.com.

Two Part Ring based on Portal 2 GLaDOS.

SIZE 6

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black

Click for Size 6.5 White
Click for Size 6.5 Black

Click for Size 7 White
Click for Size 7 Black

Click for Size 7.5 White
Click for Size 7.5 Black

Click for Size 8 White
Click for Size 8 Black

Click for Size 8.5 White
Click for Size 8.5 Black

Click for Size 9 White
Click for Size 9 Black

Click for Size 9.5 White
Click for Size 9.5 Black

Click for Size 10 White
Click for Size 10 Black

Click for Size 10.5 White
Click for Size 10.5 Black

Click for Size 11 White
Click for Size 11 Black

Click for Size 11.5 White
Click for Size 11.5 Black

Click for Size 12 White
Click for Size 12 Black

Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

It's a little hypercube pendant! There is a slightly bigger one here.

Pendant with delicate design of blossom branch.
Perfect as a special gift for your beloved one.

If you want silver version, head over here : Silver Blossom Heart

this is size MEDIUM
size LARGE also available
don't know which size you need? check out our sizing guide

An intricate, organic cuff from our Cell Cycle collection which was inspired by the cellular cross-section of bamboo The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. 
The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.