NOTE: This ring does not come with a leather cord. You can easily (and inexpensively buy such a cord from ebay (search for 'flat leather cord') or from a craft store.

Price Reductions are now permanent



Stainless Steel = $25
Sterling Silver Glossy = $70
Antique Bronze = $27



It has 3 inscriptions:

- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"

- 29 Januarie 1596: the day after Sir Francis supposedly died

- 9.32.79: The coordinates of his coffin

Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)



For the Uncharted 1+2 version of the ring go here: http://shpws.me/ETR

this piece is size MEDIUM
size LARGE also available
not sure which size you need? check out our sizing chart

An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.

The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.

 This 2in wide cuff is truly a bold accessory! It features a flexible C-shaped design that fits closely against the wrist. It was grown from 4 separate root points which gradually intertwined into a single network.

watch the video to see how it was created!

Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

A pendant for metal printing.  I have trouble believing that these are photos and not renders...something about this object feels very unlikely.

NOTE: This ring does not come with a leather cord. You can easily (and inexpensively buy such a cord from ebay (search for 'flat leather cord') or from a craft store.

It has 3 inscriptions:

- SIC PARVIS MAGNA: meaning "Greatness from small beginnings"

- 29 Januarie 1596: the day after Sir Francis supposedly died

- 9.32.79: The coordinates of his coffin

Ring comes in one size only and is designed to be worn around your neck (or on your finger if it fits, it's a US size 10)



For the Uncharted 3 version of the ring go here: http://shpws.me/2eHM

Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.

Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.

If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.

Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.

Some of the mentions of Pod à porter when it was originally released:

Wear your shuffle and nothing else...
gizmodo.com

Pod à porter, a 3d-printed iPod shuffle necklace
wired.com

Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com

Very smart.
joshspear.com

mocoloco.com

notcot.org

ilounge.com

design-milk.com

NY Times mentions Pod å`porter!
nytimes.com

Tool, symbol or both?

The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.

I recommend using it with a red leather cord of about 78 cm/ 31 inch.

If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).

Skyrim pendant

I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0

I already have pictures of the pendant in stainless steel pictures in stainless steel

Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.

The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.

Inspired by the well known mobius strip (discovered by August Ferdinand Möbius in 1858), an interest in the unusual, and 3D modelling, I created the Twin Rail mobius pendant.

A half shell and 3 rails form a bearing-like structure to encapsulate a train of 6mm balls in a mind-warping cage with a twisting, fascinating movement bringing to life the only pendent of its kind in the world.

Includes a 4mm loop for attaching to a necklace or leather cord.

See the photographs with retro-fitted 31 6mm chrome steel ball bearings... in the bottom photo, the balls have been heated until they 'blue'... check out the video to see how they move by clicking on the little icon below the camera above.

Also available smaller and in silver, Twin Rail Mobius Pendant - small


Note: this item is the shell alone, you will need to aquire and fit the balls (31 x 6mm or 29 x 1/4 in) as well as a suitable necklace to hang it from, a 3mm leather cord works well.

A 3-dimensional version of the Hilbert space filling curve. As shown in the photos, if printed in one of the "Strong & Flexible" plastics, it can be used as a bracelet or hair accessory. It takes a little time to reform back as a cube after being stretched, but it seems that leaving it overnight does the job.

A fine network of vessels defines the surface of this crescent-shaped pendant which was inspired by how veins form in leaves. The densely interconnected structure is at once airy and strong.

It is a part of Hyphae, a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge.

Watch the video below to see the the form was created.

--
If you are interested in purchasing the necklace with the chain, please buy from our website
nylon plastic version: http://n-e-r-v-o-u-s.com/shop/product.php?code=85
sterling silver version: http://n-e-r-v-o-u-s.com/shop/product.php?code=96
 
If you purchase directly from Shapeways it will not come with a chain.

A pendant for metal printing.  I think this may be the most adorable thing ever.

A small necklace to carry plants with you throughout the day. Works well with a small succulent planted inside, or fresh picked flowers. When this is printed in Shapeways' detail materials, it is watertight and can accommodate a plant with some water. If you purchase this item from our Shapeways shop, please email hello [at] wearableplanter.com and we will send you your choice of leather or cotton cord to go with your necklace, as well as instructions on how to add plants.

Bracelet based on branching pattern.
Default diameter is 65 mm (various sizes available).
Also available as ring.. Please contact us

Updated Geometry/ Issues fixed

A striking cellular cuff inspired by microscopic cellular structures and created using computer simulation and 3d-printing.

this bracelet is size MEDIUM
also available in size LARGE  

The C-shaped design fits close to the skin, is light-weight and uses minimal material. It was built up layer by layer from stainless steel powder using 3D printing and fused in a kiln. The two layer form of the cuff would be impossible to create by traditional manufacturing methods. Its outer surfaces have a smooth, polished finish which contrasts with the unpolished interior to create an intricate, 3-dimensional cuff.

It is a part of our Cell Cycle collection which was inspired by the intricate mineral forms of Radiolarians. The form is the result of a physics simulation of the forces in a cellular network of springs. Using our custom software, we created the Spiral Cuff by morphing, twisting, and subdividing; transforming a simple mesh to a complex patterned structure.

--

this design optimized for printing in stainless steel but is also great in the "Strong & Flexible" family of materials

love hurts...but it's fashionable. Clip on back slides into pocket or hangs on pin. Can also be strung as a necklace. Depicting the beauty & pain associated with love… white symbolizing purity, red for passion, black for loss, & silver for reward. The trickle of blood symbolizes sacrifice. It was inspired by the irony of such conflicting emotions within the experience of a relationship.

This is a new version of the Hand- Heart sculpture. It includes loops that make for easy attachment of a necklace chain!

*Chain NOT included* If you are looking for a chain, here's a helpful link!: Chains

Draw your earrings and we will turn them into 3d.
Instructions:
1) Download Sketch Sheet
2) Scan the sketch sheet and save the image.
3) Click "Personalize" and upload the image.
4) Order your ring in your choice of material. Shapeways will turn your drawing into a printable 3D model, and ship it to you.

Skyrim 'Dragonborn' ring

Your own Skyrim ring ! Write your own (character) name in Draconic language..(now it's writing Novastar)

The pictures of the ring are in stainless steel
pictures in stainless steel


Also check out my Skyrim pendant Skyrim pendant .

Personalize your ring by choosing a ring size.
~
Sizes
~
Size 5 / 15
Inner diameter: 0.61 inch / 15.70 mm
Inner circumference: 1.94 inch / 49.21 mm
~
Size 6 / 16
Inner diameter: 0.64 inch / 16.51 mm
Inner circumference: 2.06 inch / 52.39 mm
~
Size 7 / 17
Inner diameter: 0.68 inch / 17.35 mm
Inner circumference: 2.19 inch / 55.56 mm
~
Size 8 / 18
Inner diameter: 0.71 inch / 18.19 mm
Inner circumference: 2.31 inch / 58.74 mm
~
Size 9 / 19
Inner diameter: 0.74 inch / 18.89 mm
Inner circumference: 2.44 inch / 61.91 mm
~
Size 10 / 20
Inner diameter: 0.77 inch / 19.84 mm
Inner circumference: 2.56 inch / 65.09 mm
~
Size 11 / 21
Inner diameter: 0.81 inch / 20.68 mm
Inner circumference: 2.69 inch / 68.26 mm


The ring is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.

var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-27376216-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })();

[UPDATE] 24/01/2013:
The amulet is now available in a few smaller sizes:
Amulet 3.5cm

Amulet 3.0cm

///////////////
Amulet is 4 cm (1.6 in) with increased details!!!
(like the mouth and eyes, to make the lines more visible)
For the ones who think it's a bit to dark i would suggest to order it in Gold Plated Glossy.

Amulet comes without a cord!

For infos about the materials pls check this site: http://www.shapeways.com/materials/steel

This amulet was inspired from the amulet which Dean Winchester is wearing in the TV-Series SUPERNATURAL.
Should be very screen accurate.

Please rate the amulet if you like it. Thanks! :)

Neue, überarbeitete Version. Auf 4cm vergrößert und Detailgrad erhöht!!
Details an den Augen und dem Mund wurden ebenfalls verstärkt, um sie deutlicher zu machen.
Wem das Material "Antique Bronze Glossy" zu dunkel ist, dem schlage ich vor "Gold Plated Glossy" zu wählen :)

Dieses Amulett ist inspiriert von der Halskette die Dean Winchester in SUPERNATURAL trägt. Habe sie möglichst detailgetreu nachempfunden und kommt dem Original sehr Nahe finde ich.

Hoffe, es gefällt euch :) Dürft es gerne oberhalb dieser Seite mit den Sternen bewerten. Danke!

Kingdom: Animalia
Phylum: Mollusca
Class: Cephalopoda
Order: Octopoda
Suborder: Incirrina
Family: Octopodidae
Subfamily: Octopodinae
Species: Octopus vulgaris, the Common Octopus.

Members of the class cephalopoda are carnivorous hunters. They have the most advanced nervous system of all invertebrate animals and are an important example of advanced cognitive evolution in animals.

O. vulgaris is the most studied of all octopus species and possesses excellent eyesight, capable of distinguishing shapes, textures, and colour. It is the only animal which has been conclusively shown to use tools, and is proficient at learning simple processes such as unscrewing a jar.

Cephalopods are able to release dark pigment into the water as an escape mechanism, which in the past has been extracted and used by humans as an ink or dye. The word sepia comes from the Latin word for cuttlefish, s?pía.

The Ring:

This ring is made using 3D Printing.technology.
It is available in either stainless steel or silver.
It is available in sizes XS, S, M, L, XL. - ring size chart

Resembling a bat or dragon, these biotech earrings are the wings of an alien exoform.


This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick

Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:

- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com

Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)

That's it, otherwise have fun!

this pieces is size LARGE
size MEDIUM also available
not sure which size you need? check out our sizing chart

An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.

The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.