side is read be number of planet gears on the top side.  spinning any gear should cause all other gears to move.  great care has been taken so die is perfectly weighted no mater what position gears are in.

Has been printed.  FUD is to soft to allow gears to work.  Looks really cool though.

Soft feeling dice. Ice cube shaped. Hollow piece.

Take the traditional Jacks game to a whole new level. These standard sized Jack dice feel amazing in your hand and roll even better.

With percentile die.

D4 Shell

It's a Truncated Sphere D4 without faces!
The idea of keeping only the round part of a truncated sphere die when the numbers are located on vertices or edges is from Clsn (check his D9 for instance).
The thickness is 2 mm. Since it does not contain a lot of material, this die is quite affordable.

All the D4: 
  - Truncated Sphere D4
 - Concave D4
 - D4 Shell

See also the D8 Shell.

• 32 faceted die • Design based upon the geometry of the Truncated Icosahedron, a.k.a. the Soccer Ball • Hexagonal faces numbered 1 to 20; Pentagonal faces numbered 21 to 32 • Uses the same original construction algorithm as the popular ICODIE and the Dodclock Die • A related design that can be worn as a Pendant
*******************
See other Soccer Ball (A.K.A. Truncated Icosidodecahedron) related designs here:
Soccer Ball Ring
Soccer Ball Earrings
Soccer Ball with Roosevelt Island Tram inside
Soccer Ball Pendant
Soccer Ball with American Football Inside #1
Soccer Ball with American Football Inside #2
Soccer Ball Pendant /Keyring
Dutch Shoe Inside Soccer Ball #1
Soccer Ball with Dutch Soccer Shoe Inside
Peace Ball
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

A 125% scale version of the Die4, Die6, Die8, Die10, Die12, and Die20 models.

Truncated Sphere D11 with 3-fold symmetry.

This die is inspired by the repulsion force polyhedra. Nonetheless, the underlying polyhedron (not rounded) is very different from the shape that can be obtained through this technique with 11 points repulsing each others.

Actually, I calculated the positions of 11 points to have a maximal radius for the circles resulting from the intersection of this underlying polyhedron with a sphere with the following constraints:
- 2 poles (upper and lower face - parallel to the horizontal plane)
- 3 points around each pole
- 3 remaining points corresponding to 3 faces perpendicular to the horizontal plane

The result is a truncated sphere with 11 circular faces of same radius.

It is numbered from 1 to 11: 2 numbers are on faces (poles), 6 between vertices and face and  3 on edges. The sum of the numbers on the 3 upper vertices surronding the North pole is 18.  Same thing for the sum of the 3 numbers on the lower vertices surronding the South pole and the sum of the 3 numbers on the edges of the equator.

This die is made of a shell of 1.5mm that contains support material to make it heavier. The engraved numbers have a 0.75 mm depth. They are quite big since they overlap the surrounding faces and thus should be very easy to read.

See this thread for more informations.

Available Truncated Sphere Dice: D4, D6, D8, D9, D10, D%, D11, D12, D14, D15, D16, D17, D18, D20, D24, D32, D33
Alternative shapes: alt D8, 3-fold D10 (rounded), 3-fold D10 (pointed), 4-fold D10, 5-folded D10 (pointed)
Coming soon: D22, D50
Related dice: Concave D4, Concave D6, D4 Shell, D8 Shell.

This is a 16mm - 24mm dice set modeled after the Deathly Hallows from Harry Potter.

The Black Strong & Flexible set (red background) was hand-painted using Spanish Copper and Gold rub'n'buff (sold separately).

• 60-sided die with faces numbered from 1 to 60.
• This design is based upon the geometry of the Pentagonal Hexecontahedron

• A variation of this design could be seen here: http://www.shapeways.com/model/148752/the_rosetta_dice__1__60_.html

See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

• Note: The unique construction method that I have used in assembling (piece by piece) this model is based upon a Theorem on the Duality of Regular Polyhedra that I have demonstrated in 1981– while creating and building, by hand, a series of polyhedral sculptures. For more info, see:
http://www.cascador.com/RegularPolyhedra/PolyhedraH.htm
http://www.cascador.com/RegularPolyhedra/PolyhedralSculptures/PolyhedraSculptures1.html
http://www.cascador.com/RegularPolyhedra/PolyLamps/PolyLamps1.html
http://www.cascador.com/RegularPolyhedra/sampleimages.htm

6d6 dice set modeled in a Steampunk theme.

A d12 that''s a *rhombic* dodecahedron instead of a regular one.

Now you can carry a fortune telling I-Ching die with you wherever you go!  
This 8-Sided die is hollow and can be worn as an attractive pendant. It ships with a 23" black necklace with a bayonet lock and is ready to wear, or roll!

Recommended in Stainless Steel, gold, Alumide or Bronze.

Reading your fortune using the I Ching: Roll the die twice (or once with 2 die) make a note of the trigrams from each roll, when stacked over the top of each other they create one of the 64 Hexagrams that will answer your question. The following website is a handy resource for interpreting the hexagram: http://www.psychic-revelation.com/reference/i_l/i_ching/i_ching_interpretation.html

A d2 made from the dual of a standard sphereicon. (made from a cylinder instead of a dual-cone) Pips are placed on either side to see the result.

  An icosahedral die in the style of the weighted cubes of Valve's Portal. With numbers one to twenty inscribed in the circular faces.

Or buy the entire set of five dice for just $29.99

 

Long before we Shapies designed our own dice the Romans played with Long Dice. These were made out of ivory, typically, and had designs carved onto the faces to represent the numbers. This intrigued me and I looked around the Wicked Wide World and couldn't find any for sale. So I made one. It measures 3x1cm and I have attempted to make it fairly weight distributed by carving out six semi-spheres on each face - some on the outside and the remainder on the inside; yes, I know this isn't perfect but it's better than having one side with one hole and the other side with six.

The added bonus to this design is that the dice doesn't go bouncing all over the playing surface, making it much safer for children to play with. 

d6 with dwarves runes from Tolkien

See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.

Double D6

This is a compound of a nearly regular D6 and of a sum-D6. As the sum-D6 that composes the shell gives results from 0 to 5, the core is numbered from 2 to 7.
As a consequence, when you roll this double die, you got the same results as summing the results of two regular D6. But in a very original way!
For instance, in the rendering, the upper face of the core show 3 pips and the upper part of the shell, around this face, shows 2 extra pips. Thus, the result is 3+1+1 that is 5.

SUCESSFULLY PRINTED in White Strong and Flexible.
Not printable in Metal, sorry (movable parts).

More information in this post.

Double Coin D4
This is a D4 working as two interlocked coins.
Clearances are 0.5 mm and works perfectly for Strong and Flexible.

Also check the Double D6 based on a similar concept.

Hollow 6-Sided Die w/ numbers cut thru to the middle.  Numbered 1 thru 6, do not be tricked by the direction the part uploaded.  All 6 sides were designed to have the same mass, to keep the same "random-ness" of a tradition die.

**May not print in some metals or sandstone.  Walls are 2mm thick.**